| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240621075208.513497-28-yu-hao.lin@nxp.com>
Date: Fri, 21 Jun 2024 15:51:52 +0800
From: David Lin <yu-hao.lin@....com>
To: linux-wireless@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
briannorris@...omium.org,
kvalo@...nel.org,
francesco@...cini.it,
tsung-hsien.hsieh@....com,
David Lin <yu-hao.lin@....com>
Subject: [PATCH 27/43] wifi: nxpwifi: add sdio.h
Signed-off-by: David Lin <yu-hao.lin@....com>
---
drivers/net/wireless/nxp/nxpwifi/sdio.h | 340 ++++++++++++++++++++++++
1 file changed, 340 insertions(+)
create mode 100644 drivers/net/wireless/nxp/nxpwifi/sdio.h
diff --git a/drivers/net/wireless/nxp/nxpwifi/sdio.h b/drivers/net/wireless/nxp/nxpwifi/sdio.h
new file mode 100644
index 000000000000..de5c884a5b14
--- /dev/null
+++ b/drivers/net/wireless/nxp/nxpwifi/sdio.h
@@ -0,0 +1,340 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * NXP Wireless LAN device driver: SDIO specific definitions
+ *
+ * Copyright 2011-2024 NXP
+ */
+
+#ifndef _NXPWIFI_SDIO_H
+#define _NXPWIFI_SDIO_H
+
+#include "main.h"
+
+#define IW61X_SDIO_FW_NAME "nxp/sd_w61x_v1.bin.se"
+
+#define BLOCK_MODE 1
+#define BYTE_MODE 0
+
+#define NXPWIFI_SDIO_IO_PORT_MASK 0xfffff
+
+#define NXPWIFI_SDIO_BYTE_MODE_MASK 0x80000000
+
+#define NXPWIFI_MAX_FUNC2_REG_NUM 13
+#define NXPWIFI_SDIO_SCRATCH_SIZE 10
+
+#define SDIO_MPA_ADDR_BASE 0x1000
+
+#define CMD_PORT_UPLD_INT_MASK (0x1U << 6)
+#define CMD_PORT_DNLD_INT_MASK (0x1U << 7)
+#define HOST_TERM_CMD53 (0x1U << 2)
+#define REG_PORT 0
+#define MEM_PORT 0x10000
+
+#define CMD53_NEW_MODE (0x1U << 0)
+#define CMD_PORT_RD_LEN_EN (0x1U << 2)
+#define CMD_PORT_AUTO_EN (0x1U << 0)
+#define CMD_PORT_SLCT 0x8000
+#define UP_LD_CMD_PORT_HOST_INT_STATUS (0x40U)
+#define DN_LD_CMD_PORT_HOST_INT_STATUS (0x80U)
+
+#define NXPWIFI_MP_AGGR_BSIZE_32K (32768)
+/* we leave one block of 256 bytes for DMA alignment*/
+#define NXPWIFI_MP_AGGR_BSIZE_MAX (65280)
+
+/* Misc. Config Register : Auto Re-enable interrupts */
+#define AUTO_RE_ENABLE_INT BIT(4)
+
+/* Host Control Registers : Configuration */
+#define CONFIGURATION_REG 0x00
+/* Host Control Registers : Host power up */
+#define HOST_POWER_UP (0x1U << 1)
+
+/* Host Control Registers : Upload host interrupt mask */
+#define UP_LD_HOST_INT_MASK (0x1U)
+/* Host Control Registers : Download host interrupt mask */
+#define DN_LD_HOST_INT_MASK (0x2U)
+
+/* Host Control Registers : Upload host interrupt status */
+#define UP_LD_HOST_INT_STATUS (0x1U)
+/* Host Control Registers : Download host interrupt status */
+#define DN_LD_HOST_INT_STATUS (0x2U)
+
+/* Host Control Registers : Host interrupt status */
+#define CARD_INT_STATUS_REG 0x28
+
+/* Card Control Registers : Card I/O ready */
+#define CARD_IO_READY (0x1U << 3)
+/* Card Control Registers : Download card ready */
+#define DN_LD_CARD_RDY (0x1U << 0)
+
+/* Max retry number of CMD53 write */
+#define MAX_WRITE_IOMEM_RETRY 2
+
+/* SDIO Tx aggregation in progress ? */
+#define MP_TX_AGGR_IN_PROGRESS(a) ((a)->mpa_tx.pkt_cnt > 0)
+
+/* SDIO Tx aggregation buffer room for next packet ? */
+#define MP_TX_AGGR_BUF_HAS_ROOM(a, len) ({ \
+ typeof(a) (_a) = a; \
+ (((_a)->mpa_tx.buf_len + (len)) <= (_a)->mpa_tx.buf_size); \
+ })
+
+/* Copy current packet (SDIO Tx aggregation buffer) to SDIO buffer */
+#define MP_TX_AGGR_BUF_PUT(a, payload, pkt_len, port) do { \
+ typeof(a) (_a) = (a); \
+ typeof(pkt_len) (_pkt_len) = pkt_len; \
+ typeof(port) (_port) = port; \
+ memmove(&(_a)->mpa_tx.buf[(_a)->mpa_tx.buf_len], \
+ payload, (_pkt_len)); \
+ (_a)->mpa_tx.buf_len += (_pkt_len); \
+ if (!(_a)->mpa_tx.pkt_cnt) \
+ (_a)->mpa_tx.start_port = (_port); \
+ if ((_a)->mpa_tx.start_port <= (_port)) \
+ (_a)->mpa_tx.ports |= (1 << ((_a)->mpa_tx.pkt_cnt)); \
+ else \
+ (_a)->mpa_tx.ports |= (1 << ((_a)->mpa_tx.pkt_cnt + 1 + \
+ ((_a)->max_ports - \
+ (_a)->mp_end_port))); \
+ (_a)->mpa_tx.pkt_cnt++; \
+} while (0)
+
+/* SDIO Tx aggregation limit ? */
+#define MP_TX_AGGR_PKT_LIMIT_REACHED(a) ({ \
+ typeof(a) (_a) = a; \
+ ((_a)->mpa_tx.pkt_cnt == (_a)->mpa_tx.pkt_aggr_limit); \
+ })
+
+/* Reset SDIO Tx aggregation buffer parameters */
+#define MP_TX_AGGR_BUF_RESET(a) do { \
+ typeof(a) (_a) = (a); \
+ (_a)->mpa_tx.pkt_cnt = 0; \
+ (_a)->mpa_tx.buf_len = 0; \
+ (_a)->mpa_tx.ports = 0; \
+ (_a)->mpa_tx.start_port = 0; \
+} while (0)
+
+/* SDIO Rx aggregation limit ? */
+#define MP_RX_AGGR_PKT_LIMIT_REACHED(a) ({ \
+ typeof(a) (_a) = a; \
+ ((_a)->mpa_rx.pkt_cnt == (_a)->mpa_rx.pkt_aggr_limit); \
+ })
+
+/* SDIO Rx aggregation in progress ? */
+#define MP_RX_AGGR_IN_PROGRESS(a) ((a)->mpa_rx.pkt_cnt > 0)
+
+/* SDIO Rx aggregation buffer room for next packet ? */
+#define MP_RX_AGGR_BUF_HAS_ROOM(a, rx_len) ({ \
+ typeof(a) (_a) = a; \
+ ((((_a)->mpa_rx.buf_len + (rx_len))) <= (_a)->mpa_rx.buf_size); \
+ })
+
+/* Reset SDIO Rx aggregation buffer parameters */
+#define MP_RX_AGGR_BUF_RESET(a) do { \
+ typeof(a) (_a) = (a); \
+ (_a)->mpa_rx.pkt_cnt = 0; \
+ (_a)->mpa_rx.buf_len = 0; \
+ (_a)->mpa_rx.ports = 0; \
+ (_a)->mpa_rx.start_port = 0; \
+} while (0)
+
+/* data structure for SDIO MPA TX */
+struct nxpwifi_sdio_mpa_tx {
+ /* multiport tx aggregation buffer pointer */
+ u8 *buf;
+ u32 buf_len;
+ u32 pkt_cnt;
+ u32 ports;
+ u16 start_port;
+ u8 enabled;
+ u32 buf_size;
+ u32 pkt_aggr_limit;
+};
+
+struct nxpwifi_sdio_mpa_rx {
+ u8 *buf;
+ u32 buf_len;
+ u32 pkt_cnt;
+ u32 ports;
+ u16 start_port;
+ u32 *len_arr;
+ u8 enabled;
+ u32 buf_size;
+ u32 pkt_aggr_limit;
+};
+
+int nxpwifi_bus_register(void);
+void nxpwifi_bus_unregister(void);
+
+struct nxpwifi_sdio_card_reg {
+ u8 start_rd_port;
+ u8 start_wr_port;
+ u8 base_0_reg;
+ u8 base_1_reg;
+ u8 poll_reg;
+ u8 host_int_enable;
+ u8 host_int_rsr_reg;
+ u8 host_int_status_reg;
+ u8 host_int_mask_reg;
+ u8 host_strap_reg;
+ u8 host_strap_mask;
+ u8 host_strap_value;
+ u8 status_reg_0;
+ u8 status_reg_1;
+ u8 sdio_int_mask;
+ u32 data_port_mask;
+ u8 io_port_0_reg;
+ u8 io_port_1_reg;
+ u8 io_port_2_reg;
+ u8 max_mp_regs;
+ u8 rd_bitmap_l;
+ u8 rd_bitmap_u;
+ u8 rd_bitmap_1l;
+ u8 rd_bitmap_1u;
+ u8 wr_bitmap_l;
+ u8 wr_bitmap_u;
+ u8 wr_bitmap_1l;
+ u8 wr_bitmap_1u;
+ u8 rd_len_p0_l;
+ u8 rd_len_p0_u;
+ u8 card_misc_cfg_reg;
+ u8 card_cfg_2_1_reg;
+ u8 cmd_rd_len_0;
+ u8 cmd_rd_len_1;
+ u8 cmd_rd_len_2;
+ u8 cmd_rd_len_3;
+ u8 cmd_cfg_0;
+ u8 cmd_cfg_1;
+ u8 cmd_cfg_2;
+ u8 cmd_cfg_3;
+ u8 fw_dump_host_ready;
+ u8 fw_dump_ctrl;
+ u8 fw_dump_start;
+ u8 fw_dump_end;
+ u8 func1_dump_reg_start;
+ u8 func1_dump_reg_end;
+ u8 func1_scratch_reg;
+ u8 func1_spec_reg_num;
+ u8 func1_spec_reg_table[NXPWIFI_MAX_FUNC2_REG_NUM];
+};
+
+struct sdio_mmc_card {
+ struct sdio_func *func;
+ struct nxpwifi_adapter *adapter;
+
+ struct completion fw_done;
+ const char *firmware;
+ const char *firmware_sdiouart;
+ const struct nxpwifi_sdio_card_reg *reg;
+ u8 max_ports;
+ u8 mp_agg_pkt_limit;
+ u16 tx_buf_size;
+ u32 mp_tx_agg_buf_size;
+ u32 mp_rx_agg_buf_size;
+
+ u32 mp_rd_bitmap;
+ u32 mp_wr_bitmap;
+
+ u16 mp_end_port;
+ u32 mp_data_port_mask;
+
+ u8 curr_rd_port;
+ u8 curr_wr_port;
+
+ u8 *mp_regs;
+ bool can_dump_fw;
+ bool fw_dump_enh;
+ bool can_ext_scan;
+
+ struct nxpwifi_sdio_mpa_tx mpa_tx;
+ struct nxpwifi_sdio_mpa_rx mpa_rx;
+
+ struct work_struct work;
+ unsigned long work_flags;
+};
+
+struct nxpwifi_sdio_device {
+ const char *firmware;
+ const char *firmware_sdiouart;
+ const struct nxpwifi_sdio_card_reg *reg;
+ u8 max_ports;
+ u8 mp_agg_pkt_limit;
+ u16 tx_buf_size;
+ u32 mp_tx_agg_buf_size;
+ u32 mp_rx_agg_buf_size;
+ bool can_dump_fw;
+ bool fw_dump_enh;
+ bool can_ext_scan;
+};
+
+/* .cmdrsp_complete handler
+ */
+static inline int nxpwifi_sdio_cmdrsp_complete(struct nxpwifi_adapter *adapter,
+ struct sk_buff *skb)
+{
+ dev_kfree_skb_any(skb);
+ return 0;
+}
+
+/* .event_complete handler
+ */
+static inline int nxpwifi_sdio_event_complete(struct nxpwifi_adapter *adapter,
+ struct sk_buff *skb)
+{
+ dev_kfree_skb_any(skb);
+ return 0;
+}
+
+static inline bool
+mp_rx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+ u8 tmp;
+
+ if (card->curr_rd_port < card->mpa_rx.start_port) {
+ tmp = card->mp_end_port >> 1;
+
+ if (((card->max_ports - card->mpa_rx.start_port) +
+ card->curr_rd_port) >= tmp)
+ return true;
+ }
+
+ if ((card->curr_rd_port - card->mpa_rx.start_port) >=
+ (card->mp_end_port >> 1))
+ return true;
+
+ return false;
+}
+
+static inline bool
+mp_tx_aggr_port_limit_reached(struct sdio_mmc_card *card)
+{
+ u16 tmp;
+
+ if (card->curr_wr_port < card->mpa_tx.start_port) {
+ tmp = card->mp_end_port >> 1;
+
+ if (((card->max_ports - card->mpa_tx.start_port) +
+ card->curr_wr_port) >= tmp)
+ return true;
+ }
+
+ if ((card->curr_wr_port - card->mpa_tx.start_port) >=
+ (card->mp_end_port >> 1))
+ return true;
+
+ return false;
+}
+
+/* Prepare to copy current packet from card to SDIO Rx aggregation buffer */
+static inline void mp_rx_aggr_setup(struct sdio_mmc_card *card,
+ u16 rx_len, u8 port)
+{
+ card->mpa_rx.buf_len += rx_len;
+
+ if (!card->mpa_rx.pkt_cnt)
+ card->mpa_rx.start_port = port;
+
+ card->mpa_rx.ports |= (1 << port);
+ card->mpa_rx.len_arr[card->mpa_rx.pkt_cnt] = rx_len;
+ card->mpa_rx.pkt_cnt++;
+}
+#endif /* _NXPWIFI_SDIO_H */
--
2.34.1
Powered by blists - more mailing lists