[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240623-th1520-clk-v2-0-ad8d6432d9fb@tenstorrent.com>
Date: Sun, 23 Jun 2024 19:12:30 -0700
From: Drew Fustini <dfustini@...storrent.com>
To: Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>,
Fu Wei <wefu@...hat.com>, Yangtao Li <frank.li@...o.com>,
Thomas Bonnefille <thomas.bonnefille@...tlin.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>
Cc: linux-riscv@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Drew Fustini <dfustini@...storrent.com>,
Conor Dooley <conor.dooley@...rochip.com>
Subject: [PATCH v2 0/7] clk: thead: Add support for TH1520 AP_SUBSYS clock
controller
This series adds support for the AP sub-system clock controller in the
T-Head TH1520 [1]. Yangtao Li originally submitted this series in May
2023 [2]. Jisheng made additional improvements and then passed on the
work in progress to me.
Changes in v2:
- Add clock property to the gpio nodes after Conor asked why they were
missing. These clock gates correspond to enable bits in PERI_CLK_CFG.
- Drop 2 cell address and size properties from the binding example per
Conor and add Reviewed-by from from Conor.
Changes in v1:
- Split th1520_clks into groups for gate, mux, div, pll
- Convert gate clocks to devm_clk_hw_register_gate_parent_data()
- Convert mux clocks to devm_clk_hw_register_mux_parent_data_table()
- Split the PLL recalculation into th1520_pll_vco_recalc_rate() and
th1520_pll_postdiv_recalc_rate(). Based on Emil's comments in v1,
add logic to handle the fractional portion of feedback divide value
when the delta-sigma modulator (DSM) is active.
- Drop clock-names from the binding per Stephan to avoid relying on
anything other than the cell index when describing clk_parent_data
(note: I dropped Rob's Rb because I changed the binding patch)
- Rename reg/reg2 to cfg0/cfg1 to match the SoC documentation
- Rename struct for pll clocks from ccu_mdiv to ccu_pll
- Rebase on v6.10-rc3, remove the dts node reordering patch from v3
now that it is in mainline
Changes in RFC v3 [3]:
- Drop redundant new line and unused clk label from the dts example in
the DT binding which I failed to fix in v2.
- Add patch [4] from Thomas Bonnefille that fixes dts node ordering in
th1520.dtsi. Conor has already merged it into riscv-dt-for-next so
the dts patches in this series are based on top of that.
- Remove fixed uart clock and converted uart DT nodes to use clocks
from the clock controller.
- Remove fixed apb clock and converted the dma controller and timer DT
nodes to use a clock from the clock controller.
- Made ccu_disable_helper() and ccu_enable_helper() to static functions
- Follow the advice from Stephen Boyd in Yangtao's original series to
not use strings for clk tree topology. Created clk_parent_data arrays
to be used with CLK_HW_INIT_PARENTS_DATA instead of parent strings.
- Rebase on top of v6.9-rc7
Changes in RFC v2 [5]:
- squash the header file patch into the DT schema patch
- describe the changes I made to original series in the cover letter
instead of the individual patches
- fix my typo in my email address
Changes in RFC v1 [6] from the original series:
- corrected the npu_clk enable bit
- deduplicated CLK_NPU and CLK_NPU_AXI number in header
- fixed c910_i0_clk reg typo
- fixed checkpatch and dt_binding_check warnings
- rebased on v6.9-rc5
- revised commit descriptions
Thank you,
Drew
[1] https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
[2] https://lore.kernel.org/all/20230515054402.27633-1-frank.li@vivo.com/
[3] https://lore.kernel.org/all/20240506-th1520-clk-v3-0-085a18a23a7f@tenstorrent.com/
[4] https://lore.kernel.org/all/20240425082138.374445-1-thomas.bonnefille@bootlin.com/
[5] https://lore.kernel.org/all/20240426-th1520-clk-v2-v2-0-96b829e6fcee@tenstorrent.com/
[6] https://lore.kernel.org/all/20240110-clk-th1520-v1-0-8b0682567984@tenstorrent.com/
To: Jisheng Zhang <jszhang@...nel.org>
To: Guo Ren <guoren@...nel.org>
To: Fu Wei <wefu@...hat.com>
To: Yangtao Li <frank.li@...o.com>
To: Thomas Bonnefille <thomas.bonnefille@...tlin.com>
To: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Michael Turquette <mturquette@...libre.com>
To: Stephen Boyd <sboyd@...nel.org>
To: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>
To: Conor Dooley <conor+dt@...nel.org>
To: Paul Walmsley <paul.walmsley@...ive.com>
To: Palmer Dabbelt <palmer@...belt.com>
To: Albert Ou <aou@...s.berkeley.edu>
Cc: linux-riscv@...ts.infradead.org
Cc: linux-clk@...r.kernel.org
Cc: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Drew Fustini <dfustini@...storrent.com>
---
Drew Fustini (7):
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
riscv: dts: thead: Add TH1520 AP_SUBSYS clock controller
riscv: dts: thead: change TH1520 uart nodes to use clock controller
riscv: dts: thead: change TH1520 mmc nodes to use clock controller
riscv: dts: thead: update TH1520 dma and timer nodes to use clock controller
riscv: dts: thead: add clock to TH1520 gpio nodes
.../bindings/clock/thead,th1520-clk-ap.yaml | 53 +
MAINTAINERS | 3 +
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 12 -
.../boot/dts/thead/th1520-lichee-module-4a.dtsi | 12 -
arch/riscv/boot/dts/thead/th1520.dtsi | 73 +-
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/thead/Kconfig | 12 +
drivers/clk/thead/Makefile | 2 +
drivers/clk/thead/clk-th1520-ap.c | 1086 ++++++++++++++++++++
include/dt-bindings/clock/thead,th1520-clk-ap.h | 96 ++
11 files changed, 1290 insertions(+), 61 deletions(-)
---
base-commit: 83a7eefedc9b56fe7bfeff13b6c7356688ffa670
change-id: 20240622-th1520-clk-e813a97b9e16
Best regards,
--
Drew Fustini <dfustini@...storrent.com>
Powered by blists - more mailing lists