| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 24 Jun 2024 10:45:23 +0800
From: Jason Wang <jasowang@...hat.com>
To: mst@...hat.com,
jasowang@...hat.com
Cc: xuanzhuo@...ux.alibaba.com,
eperezma@...hat.com,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
virtualization@...ts.linux.dev,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
venkat.x.venkatsubra@...cle.com,
gia-khanh.nguyen@...cle.com
Subject: [PATCH V2 3/3] virtio-net: synchronize operstate with admin state on up/down
This patch synchronize operstate with admin state per RFC2863.
This is done by trying to toggle the carrier upon open/close and
synchronize with the config change work. This allows propagate status
correctly to stacked devices like:
ip link add link enp0s3 macvlan0 type macvlan
ip link set link enp0s3 down
ip link show
Before this patch:
3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
......
5: macvlan0@...0s3: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
After this patch:
3: enp0s3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 00:00:05:00:00:09 brd ff:ff:ff:ff:ff:ff
...
5: macvlan0@...0s3: <NO-CARRIER,BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
link/ether b2:a9:c5:04:da:53 brd ff:ff:ff:ff:ff:ff
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@...cle.com>
Cc: Gia-Khanh Nguyen <gia-khanh.nguyen@...cle.com>
Signed-off-by: Jason Wang <jasowang@...hat.com>
---
drivers/net/virtio_net.c | 72 +++++++++++++++++++++++-----------------
1 file changed, 42 insertions(+), 30 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index b1f8b720733e..eff3ad3d6bcc 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2468,6 +2468,25 @@ static int virtnet_enable_queue_pair(struct virtnet_info *vi, int qp_index)
return err;
}
+static void virtnet_update_settings(struct virtnet_info *vi)
+{
+ u32 speed;
+ u8 duplex;
+
+ if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
+ return;
+
+ virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
+
+ if (ethtool_validate_speed(speed))
+ vi->speed = speed;
+
+ virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
+
+ if (ethtool_validate_duplex(duplex))
+ vi->duplex = duplex;
+}
+
static int virtnet_open(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -2486,6 +2505,22 @@ static int virtnet_open(struct net_device *dev)
goto err_enable_qp;
}
+ /* Assume link up if device can't report link status,
+ otherwise get link status from config. */
+ netif_carrier_off(dev);
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
+ virtio_config_enable(vi->vdev);
+ /* We are not sure if config interrupt is disabled by
+ * core or not, so we can't schedule config_work by
+ * ourselves.
+ */
+ virtio_config_changed(vi->vdev);
+ } else {
+ vi->status = VIRTIO_NET_S_LINK_UP;
+ virtnet_update_settings(vi);
+ netif_carrier_on(dev);
+ }
+
return 0;
err_enable_qp:
@@ -2928,12 +2963,19 @@ static int virtnet_close(struct net_device *dev)
disable_delayed_refill(vi);
/* Make sure refill_work doesn't re-enable napi! */
cancel_delayed_work_sync(&vi->refill);
+ /* Make sure config notification doesn't schedule config work */
+ virtio_config_disable(vi->vdev);
+ /* Make sure status updating is cancelled */
+ cancel_work_sync(&vi->config_work);
for (i = 0; i < vi->max_queue_pairs; i++) {
virtnet_disable_queue_pair(vi, i);
cancel_work_sync(&vi->rq[i].dim.work);
}
+ vi->status &= ~VIRTIO_NET_S_LINK_UP;
+ netif_carrier_off(dev);
+
return 0;
}
@@ -4632,25 +4674,6 @@ static void virtnet_init_settings(struct net_device *dev)
vi->duplex = DUPLEX_UNKNOWN;
}
-static void virtnet_update_settings(struct virtnet_info *vi)
-{
- u32 speed;
- u8 duplex;
-
- if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_SPEED_DUPLEX))
- return;
-
- virtio_cread_le(vi->vdev, struct virtio_net_config, speed, &speed);
-
- if (ethtool_validate_speed(speed))
- vi->speed = speed;
-
- virtio_cread_le(vi->vdev, struct virtio_net_config, duplex, &duplex);
-
- if (ethtool_validate_duplex(duplex))
- vi->duplex = duplex;
-}
-
static u32 virtnet_get_rxfh_key_size(struct net_device *dev)
{
return ((struct virtnet_info *)netdev_priv(dev))->rss_key_size;
@@ -5958,17 +5981,6 @@ static int virtnet_probe(struct virtio_device *vdev)
goto free_unregister_netdev;
}
- /* Assume link up if device can't report link status,
- otherwise get link status from config. */
- netif_carrier_off(dev);
- if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_STATUS)) {
- schedule_work(&vi->config_work);
- } else {
- vi->status = VIRTIO_NET_S_LINK_UP;
- virtnet_update_settings(vi);
- netif_carrier_on(dev);
- }
-
for (i = 0; i < ARRAY_SIZE(guest_offloads); i++)
if (virtio_has_feature(vi->vdev, guest_offloads[i]))
set_bit(guest_offloads[i], &vi->guest_offloads);
--
2.31.1
Powered by blists - more mailing lists