[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240625200316.4282-9-paul.barker.ct@bp.renesas.com>
Date: Tue, 25 Jun 2024 21:03:15 +0100
From: Paul Barker <paul.barker.ct@...renesas.com>
To: Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Cc: Paul Barker <paul.barker.ct@...renesas.com>,
linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-gpio@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 8/9] arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
On the RZ/G2LC SMARC SOM, the RGMII interface between the SoC and the
Ethernet PHY operates at 1.8V.
The power supply for this interface may be correctly configured in
u-boot, but the kernel should not be relying on this. Now that the
RZ/G2L pinctrl driver supports configuring the Ethernet power supply
voltage, we can simply specify the desired voltage in the device tree.
Signed-off-by: Paul Barker <paul.barker.ct@...renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
Acked-by: Linus Walleij <linus.walleij@...aro.org>
---
Changes v2->v3:
* Picked up Linus W's Acked-by tag.
Changes v1->v2:
* Picked up Geert's Reviewed-by tag.
arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
index 664311fd2098..b4ef5ea8a9e3 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -130,6 +130,7 @@ &pinctrl {
eth0_pins: eth0 {
txc {
pinmux = <RZG2L_PORT_PINMUX(20, 0, 1)>; /* ET0_TXC */
+ power-source = <1800>;
output-enable;
};
@@ -147,8 +148,12 @@ mux {
<RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
<RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
<RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
- <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
- <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */
+ <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+ power-source = <1800>;
+ };
+
+ irq {
+ pinmux = <RZG2L_PORT_PINMUX(0, 0, 1)>; /* IRQ0 */
};
};
--
2.39.2
Powered by blists - more mailing lists