linux-kernel - [PATCH v2 3/3] ARM: dts: sti: add thermal-zones support on stih418

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240625-thermal-v2-3-bf8354ed51ee@gmail.com>
Date: Tue, 25 Jun 2024 23:32:42 +0200
From: Raphael Gallais-Pou <rgallaispou@...il.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>, 
 Daniel Lezcano <daniel.lezcano@...aro.org>, Zhang Rui <rui.zhang@...el.com>, 
 Lukasz Luba <lukasz.luba@....com>, 
 Maxime Coquelin <mcoquelin.stm32@...il.com>, 
 Alexandre Torgue <alexandre.torgue@...s.st.com>, 
 Patrice Chotard <patrice.chotard@...s.st.com>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-stm32@...md-mailman.stormreply.com, 
 linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org
Subject: [PATCH v2 3/3] ARM: dts: sti: add thermal-zones support on stih418

Add a 'thermal-zones' node for stih418.

A thermal-zone needs three components:
  - thermal sensors, described in an earlier commit[1]
  - cooling devices, specified for each CPU
  - a thermal zone, describing the overall behavior.

The thermal zone needs references to both CPUs and thermal sensors,
which phandle are also added. The thermal management will then be
achieved on CPUs using the cpufreq framework.

[1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com/

Reviewed-by: Patrice Chotard <patrice.chotard@...s.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@...il.com>
---
 arch/arm/boot/dts/st/stih407-family.dtsi |  6 +++--
 arch/arm/boot/dts/st/stih418.dtsi        | 41 +++++++++++++++++++++++++++++---
 2 files changed, 42 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi
index 29302e74aa1d..35a55aef7f4b 100644
--- a/arch/arm/boot/dts/st/stih407-family.dtsi
+++ b/arch/arm/boot/dts/st/stih407-family.dtsi
@@ -33,7 +33,7 @@ delta_reserved: rproc@...00000 {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
@@ -52,8 +52,9 @@ cpu@0 {
 			clock-latency = <100000>;
 			cpu0-supply = <&pwm_regulator>;
 			st,syscfg = <&syscfg_core 0x8e0>;
+			#cooling-cells = <2>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -66,6 +67,7 @@ cpu@1 {
 					    1200000 0
 					    800000  0
 					    500000  0>;
+			#cooling-cells = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/st/stih418.dtsi b/arch/arm/boot/dts/st/stih418.dtsi
index b35b9b7a7ccc..6622ffa8ecfa 100644
--- a/arch/arm/boot/dts/st/stih418.dtsi
+++ b/arch/arm/boot/dts/st/stih418.dtsi
@@ -6,23 +6,26 @@
 #include "stih418-clock.dtsi"
 #include "stih407-family.dtsi"
 #include "stih410-pinctrl.dtsi"
+#include <dt-bindings/thermal/thermal.h>
 / {
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <2>;
 			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
 			cpu-release-addr = <0x94100A4>;
+			#cooling-cells = <2>;
 		};
-		cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <3>;
 			/* u-boot puts hpen in SBC dmem at 0xa4 offset */
 			cpu-release-addr = <0x94100A4>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -44,6 +47,38 @@ usb2_picophy2: phy3 {
 		reset-names = "global", "port";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <250>;  /* 250ms */
+			polling-delay = <1000>;         /* 1000ms */
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <95000>;  /* 95C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <85000>;  /* 85C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	soc {
 		rng11: rng@...a000 {
 			status = "disabled";
@@ -107,7 +142,7 @@ mmc0: sdhci@...0000 {
 			assigned-clock-rates = <200000000>;
 		};
 
-		thermal@...0000 {
+		thermal: thermal@...0000 {
 			compatible = "st,stih407-thermal";
 			reg = <0x91a0000 0x28>;
 			clock-names = "thermal";

-- 
2.45.2