| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0bfcbf2e-9082-4287-9821-acd85a7024b9@linaro.org>
Date: Tue, 25 Jun 2024 06:58:50 +0100
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Alexey Klimov <alexey.klimov@...aro.org>
Cc: Bjorn Andersson <andersson@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: Re: [PATCH v2 v4 2/2] pinctrl: qcom: Introduce SM4250 LPI pinctrl
driver
Thanks Alexey,
On 24/06/2024 22:36, Alexey Klimov wrote:
> Hi Srini,
>
> On Sat, 22 Jun 2024 at 17:49, Srinivas Kandagatla
> <srinivas.kandagatla@...aro.org> wrote:
>>
>> Add support for the pin controller block on SM4250 Low Power Island.
>>
>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>> ---
>> drivers/pinctrl/qcom/Kconfig | 9 +
>> drivers/pinctrl/qcom/Makefile | 1 +
>> drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c | 236 ++++++++++++++++++++++++
>> 3 files changed, 246 insertions(+)
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index 24619e80b2cc..dd9bbe8f3e11 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -68,6 +68,15 @@ config PINCTRL_SC7280_LPASS_LPI
>> Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> (Low Power Island) found on the Qualcomm Technologies Inc SC7280 platform.
>>
>> +config PINCTRL_SM4250_LPASS_LPI
>> + tristate "Qualcomm Technologies Inc SM4250 LPASS LPI pin controller driver"
>> + depends on ARM64 || COMPILE_TEST
>> + depends on PINCTRL_LPASS_LPI
>> + help
>> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
>> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
>> + (Low Power Island) found on the Qualcomm Technologies Inc SM4250 platform.
>> +
>> config PINCTRL_SM6115_LPASS_LPI
>> tristate "Qualcomm Technologies Inc SM6115 LPASS LPI pin controller driver"
>> depends on ARM64 || COMPILE_TEST
>> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
>> index e2e76071d268..eb04297b6388 100644
>> --- a/drivers/pinctrl/qcom/Makefile
>> +++ b/drivers/pinctrl/qcom/Makefile
>> @@ -43,6 +43,7 @@ obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o
>> obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o
>> obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o
>> obj-$(CONFIG_PINCTRL_SDX75) += pinctrl-sdx75.o
>> +obj-$(CONFIG_PINCTRL_SM4250_LPASS_LPI) += pinctrl-sm4250-lpass-lpi.o
>> obj-$(CONFIG_PINCTRL_SM4450) += pinctrl-sm4450.o
>> obj-$(CONFIG_PINCTRL_SM6115) += pinctrl-sm6115.o
>> obj-$(CONFIG_PINCTRL_SM6115_LPASS_LPI) += pinctrl-sm6115-lpass-lpi.o
>> diff --git a/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
>> new file mode 100644
>> index 000000000000..2d2c636a3e20
>> --- /dev/null
>> +++ b/drivers/pinctrl/qcom/pinctrl-sm4250-lpass-lpi.c
>> @@ -0,0 +1,236 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2020, 2023 Linaro Ltd.
>> + */
>> +
>> +#include <linux/gpio/driver.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "pinctrl-lpass-lpi.h"
>> +
>> +enum lpass_lpi_functions {
>> + LPI_MUX_dmic01_clk,
>> + LPI_MUX_dmic01_data,
>> + LPI_MUX_dmic23_clk,
>> + LPI_MUX_dmic23_data,
>> + LPI_MUX_dmic4_clk,
>> + LPI_MUX_dmic4_data,
>> + LPI_MUX_ext_mclk0_a,
>> + LPI_MUX_ext_mclk0_b,
>> + LPI_MUX_ext_mclk1_a,
>> + LPI_MUX_ext_mclk1_b,
>> + LPI_MUX_ext_mclk1_c,
>> + LPI_MUX_i2s1_clk,
>> + LPI_MUX_i2s1_data,
>> + LPI_MUX_i2s1_ws,
>> + LPI_MUX_i2s2_clk,
>> + LPI_MUX_i2s2_data,
>> + LPI_MUX_i2s2_ws,
>> + LPI_MUX_i2s3_clk,
>> + LPI_MUX_i2s3_data,
>> + LPI_MUX_i2s3_ws,
>> + LPI_MUX_qup_io_00,
>> + LPI_MUX_qup_io_01,
>> + LPI_MUX_qup_io_05,
>> + LPI_MUX_qup_io_10,
>> + LPI_MUX_qup_io_11,
>> + LPI_MUX_qup_io_25,
>> + LPI_MUX_qup_io_21,
>> + LPI_MUX_qup_io_26,
>> + LPI_MUX_qup_io_31,
>> + LPI_MUX_qup_io_36,
>> + LPI_MUX_qua_mi2s_data,
>> + LPI_MUX_qua_mi2s_sclk,
>> + LPI_MUX_qua_mi2s_ws,
>> + LPI_MUX_slim_clk,
>> + LPI_MUX_slim_data,
>> + LPI_MUX_sync_out,
>> + LPI_MUX_swr_rx_clk,
>> + LPI_MUX_swr_rx_data,
>> + LPI_MUX_swr_tx_clk,
>> + LPI_MUX_swr_tx_data,
>> + LPI_MUX_swr_wsa_clk,
>> + LPI_MUX_swr_wsa_data,
>> + LPI_MUX_gpio,
>> + LPI_MUX__,
>> +};
>> +
>> +static const struct pinctrl_pin_desc sm4250_lpi_pins[] = {
>> + PINCTRL_PIN(0, "gpio0"),
>> + PINCTRL_PIN(1, "gpio1"),
>> + PINCTRL_PIN(2, "gpio2"),
>> + PINCTRL_PIN(3, "gpio3"),
>> + PINCTRL_PIN(4, "gpio4"),
>> + PINCTRL_PIN(5, "gpio5"),
>> + PINCTRL_PIN(6, "gpio6"),
>> + PINCTRL_PIN(7, "gpio7"),
>> + PINCTRL_PIN(8, "gpio8"),
>> + PINCTRL_PIN(9, "gpio9"),
>> + PINCTRL_PIN(10, "gpio10"),
>> + PINCTRL_PIN(11, "gpio11"),
>> + PINCTRL_PIN(12, "gpio12"),
>> + PINCTRL_PIN(13, "gpio13"),
>> + PINCTRL_PIN(14, "gpio14"),
>> + PINCTRL_PIN(15, "gpio15"),
>> + PINCTRL_PIN(16, "gpio16"),
>> + PINCTRL_PIN(17, "gpio17"),
>> + PINCTRL_PIN(18, "gpio18"),
>> + PINCTRL_PIN(19, "gpio19"),
>> + PINCTRL_PIN(20, "gpio20"),
>> + PINCTRL_PIN(21, "gpio21"),
>> + PINCTRL_PIN(22, "gpio22"),
>> + PINCTRL_PIN(23, "gpio23"),
>> + PINCTRL_PIN(24, "gpio24"),
>> + PINCTRL_PIN(25, "gpio25"),
>> + PINCTRL_PIN(26, "gpio26"),
>> +};
>
> This doesn't probe() on qrb4210 RB2 for me with the following trace:
>
> [ 10.709014] ------------[ cut here ]------------
> [ 10.719085] WARNING: CPU: 1 PID: 56 at
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c:446
> lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
> [ 10.719108] Modules linked in: btqca qrtr btbcm qcom_q6v5_pas
> libarc4 qcom_pil_info llcc_qcom bluetooth snd_soc_sm8250 ocmem
> qcom_q6v5 snd_soc_qcom_sdw cfg80211 drm_exec qcom_sysmon
> snd_soc_qcom_common gpu_sched crct10dif_ce qcom_common soundwire_bus
> ecdh_generic qcom_glink_smem pinctrl_sm4250_lpass_lpi qcom_pmic_tcpm
> drm_dp_aux_bus ecc mdt_loader qcom_wdt pinctrl_lpass_lpi
> drm_display_helper qmi_helpers tcpm dispcc_sm6115 rfkill gpucc_sm6115
> aux_hpd_bridge qcom_usb_vbus_regulator nvmem_qcom_spmi_sdam
> qcom_spmi_temp_alarm qcom_pbs qcom_pon qcom_spmi_adc5 qcom_vadc_common
> spi_geni_qcom gpi qcom_stats icc_bwmon qcom_rng qcrypto authenc
> phy_qcom_qmp_usbc display_connector rpmsg_ctrl libdes typec rpmsg_char
> phy_qcom_qusb2 drm_kms_helper rmtfs_mem socinfo i2c_gpio fuse drm
> backlight dm_mod ip_tables x_tables ipv6
> [ 10.719238] CPU: 1 PID: 56 Comm: kworker/u33:0 Not tainted
> 6.10.0-rc2-00012-ge45ddb1f8d34-dirty #7
> [ 10.719245] Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
> [ 10.719250] Workqueue: events_unbound deferred_probe_work_func
> [ 10.719265] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 10.719271] pc : lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
> [ 10.719278] lr : lpi_pinctrl_probe+0x44/0x388 [pinctrl_lpass_lpi]
> [ 10.719284] sp : ffff80008035bb40
> [ 10.719286] x29: ffff80008035bb40 x28: 0000000000000000 x27: 0000000000000000
> [ 10.719294] x26: ffff7eea83029428 x25: ffffa0c480a67510 x24: ffff7eea83be5800
> [ 10.719301] x23: ffff7eea83be5810 x22: 0000000000000000 x21: ffffa0c480a64030
> [ 10.719308] x20: ffff7eea83be5810 x19: ffff7eea89e59880 x18: ffffffffffffffff
> [ 10.719315] x17: 0000000000000000 x16: ffffa0c4f34949a4 x15: ffff80008035b7f0
> [ 10.719321] x14: ffffffffffffffff x13: 006c7274636e6970 x12: 2e30303030633761
> [ 10.719329] x11: 0101010101010101 x10: ffffa0c4f4b28ff2 x9 : 0000000000000008
> [ 10.719335] x8 : 0000000000000008 x7 : ffffa0c4f3cfa640 x6 : 0000000000000020
> [ 10.719342] x5 : 0000000000000020 x4 : 0000000000000000 x3 : ffffa0c480a67448
> [ 10.719348] x2 : ffffa0c480a67468 x1 : ffff7eea838b8000 x0 : 000000000000001b
> [ 10.719357] Call trace:
> [ 10.719361] lpi_pinctrl_probe+0x308/0x388 [pinctrl_lpass_lpi]
For some reason the common library seems to have a bit mask of 23 which
is why we are seeing this error.
Can you try this change,
--------------------------------------->cut<-------------------------------
diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 0d98008e33ee..7366aba5a199 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -20,7 +20,7 @@
#include "pinctrl-lpass-lpi.h"
-#define MAX_NR_GPIO 23
+#define MAX_NR_GPIO 32
#define GPIO_FUNC 0
#define MAX_LPI_NUM_CLKS 2
--------------------------------------->cut<-------------------------------
> [ 10.719369] platform_probe+0x68/0xc4
> [ 10.719378] really_probe+0xbc/0x29c
> [ 10.719384] __driver_probe_device+0x78/0x12c
> [ 10.719390] driver_probe_device+0xd8/0x15c
> [ 10.719395] __device_attach_driver+0xb8/0x134
> [ 10.719401] bus_for_each_drv+0x88/0xe8
> [ 10.719407] __device_attach+0xa0/0x190
> [ 10.719412] device_initial_probe+0x14/0x20
> [ 10.719418] bus_probe_device+0xac/0xb0
> [ 10.719423] deferred_probe_work_func+0x88/0xc0
> [ 10.719429] process_one_work+0x150/0x294
> [ 10.719439] worker_thread+0x2f8/0x408
> [ 10.719445] kthread+0x110/0x114
> [ 10.719452] ret_from_fork+0x10/0x20
> [ 10.719459] ---[ end trace 0000000000000000 ]---
> [ 10.719589] qcom-sm4250-lpass-lpi-pinctrl a7c0000.pinctrl: probe
> with driver qcom-sm4250-lpass-lpi-pinctrl failed with error -22
>
>
> [...]
>
> Thanks,
> Alexey
Powered by blists - more mailing lists