[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5c9ab5bf-95f2-4195-8797-335010223aac@kernel.org>
Date: Tue, 25 Jun 2024 15:44:02 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Alexandre Mergnat <amergnat@...libre.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Matthias Brugger
<matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
Lee Jones <lee@...nel.org>, Flora Fu <flora.fu@...iatek.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>,
Sumit Semwal <sumit.semwal@...aro.org>,
Christian König <christian.koenig@....com>,
Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>
Cc: linux-sound@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-media@...r.kernel.org,
dri-devel@...ts.freedesktop.org, linaro-mm-sig@...ts.linaro.org
Subject: Re: [PATCH v6 03/16] dt-bindings: mfd: mediatek: Add codec property
for MT6357 PMIC
On 25/06/2024 11:23, Alexandre Mergnat wrote:
>
>
> On 21/06/2024 17:00, Krzysztof Kozlowski wrote:
>> On 19/06/2024 16:46, Alexandre Mergnat wrote:
>>> Add the audio codec sub-device. This sub-device is used to set the
>>> optional voltage values according to the hardware.
>>> The properties are:
>>> - Setup of microphone bias voltage.
>>> - Setup of the speaker pin pull-down.
>>>
>>> Also, add the audio power supply property which is dedicated for
>>> the audio codec sub-device.
>>>
>>> Signed-off-by: Alexandre Mergnat<amergnat@...libre.com>
>>> ---
>>> .../devicetree/bindings/mfd/mediatek,mt6357.yaml | 33 ++++++++++++++++++++++
>>> 1 file changed, 33 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
>>> index 37423c2e0fdf..d95307393e75 100644
>>> --- a/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
>>> +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml
>>> @@ -37,6 +37,32 @@ properties:
>>> "#interrupt-cells":
>>> const: 2
>>>
>>> + vaud28-supply:
>>> + description: 2.8 volt supply phandle for the audio codec
>>> +
>>> + audio-codec:
>>> + type: object
>> Still not much improved. You do not have any resources there, so these
>> should go to the parent node.
>
> Hi Krzysztof,
>
> vaud28-supply seems to be a mistake that I forward port.
> In the V4, AFAII, your feedback [1] suggested me to move the vaud28-supply from the "audio-codec"
> sub-node to the parent node, which for me is the "pmic" (mfd), because the property is considered as
> power-supply.
>
> pwrap {
> pmic {
> ...
> audio-codec {
> ...
>
> Hardware side, vaud28-supply is the output of PMIC-regulator subsystem, and AVDD28 is the input of
> PMIC-audio-codec subsystem. Then:
> - The property name is wrong and must be change to AVDD28, which is a consumer (power input), not a
> power-supply. => description: 2.8 volt power input for microphones (AU_VIN0, AU_VIN1, AU_VIN2)
> - IMHO, move this property to the next parent (pwrap) isn't consistent. It should be moved back to
> Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml (Done in the V4) into audio-codec
> substystem, beside mediatek,micbias0-microvolt
I don't understand why do we talk again about supply. My comment was not
under the supply.
Best regards,
Krzysztof
Powered by blists - more mailing lists