| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240625142552.1000988-4-jbrunet@baylibre.com>
Date: Tue, 25 Jun 2024 16:25:50 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Sam Ravnborg <sam@...nborg.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>
Cc: Jerome Brunet <jbrunet@...libre.com>,
linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
dri-devel@...ts.freedesktop.org
Subject: [PATCH 3/3] drm/panel: add lincoln lcd197 support
Add support for the Lincoln LCD197 1080x1920 DSI panel.
Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
drivers/gpu/drm/panel/Kconfig | 11 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-lincoln-lcd197.c | 333 +++++++++++++++++++
3 files changed, 345 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-lincoln-lcd197.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 2ae0eb0638f3..a4e68981e740 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -319,6 +319,17 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
+config DRM_PANEL_LINCOLN_LCD197
+ tristate "Lincoln lcd197 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for lincoln lcd197
+ TFT-LCD modules. The panel has a 1080x1920 resolution and uses
+ 24 bit RGB per pixel. It provides a MIPI DSI interface to
+ the host.
+
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index f0203f6e02f4..06141ec2e065 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
+obj-$(CONFIG_DRM_PANEL_LINCOLN_LCD197) += panel-lincoln-lcd197.o
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
diff --git a/drivers/gpu/drm/panel/panel-lincoln-lcd197.c b/drivers/gpu/drm/panel/panel-lincoln-lcd197.c
new file mode 100644
index 000000000000..977790797d70
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-lincoln-lcd197.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 BayLibre, SAS
+ * Author: Jerome Brunet <jbrunet@...libre.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_device.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct lincoln_lcd197_panel {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ struct regulator *supply;
+ struct gpio_desc *enable_gpio;
+ struct gpio_desc *reset_gpio;
+
+ bool prepared;
+ bool enabled;
+};
+
+static inline
+struct lincoln_lcd197_panel *to_lincoln_lcd197_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct lincoln_lcd197_panel, panel);
+}
+
+static int lincoln_lcd197_panel_prepare(struct drm_panel *panel)
+{
+ struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel);
+ int err;
+ u8 display_id[3];
+
+ if (lcd->prepared)
+ return 0;
+
+ gpiod_set_value_cansleep(lcd->enable_gpio, 0);
+ err = regulator_enable(lcd->supply);
+ if (err < 0)
+ return err;
+
+ gpiod_set_value_cansleep(lcd->enable_gpio, 1);
+ usleep_range(1000, 2000);
+ gpiod_set_value_cansleep(lcd->reset_gpio, 1);
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(lcd->reset_gpio, 0);
+ msleep(50);
+
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xB9, 0xFF, 0x83, 0x99);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD2, 0x55);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xB1, 0x02, 0x04, 0x70, 0x90, 0x01,
+ 0x32, 0x33, 0x11, 0x11, 0x4D, 0x57, 0x56, 0x73,
+ 0x02, 0x02);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xB2, 0x00, 0x80, 0x80, 0xAE, 0x0A,
+ 0x0E, 0x75, 0x11, 0x00, 0x00, 0x00);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xB4, 0x00, 0xFF, 0x04, 0xA4, 0x02,
+ 0xA0, 0x00, 0x00, 0x10, 0x00, 0x00, 0x02, 0x00,
+ 0x24, 0x02, 0x04, 0x0A, 0x21, 0x03, 0x00, 0x00,
+ 0x08, 0xA6, 0x88, 0x04, 0xA4, 0x02, 0xA0, 0x00,
+ 0x00, 0x10, 0x00, 0x00, 0x02, 0x00, 0x24, 0x02,
+ 0x04, 0x0A, 0x00, 0x00, 0x08, 0xA6, 0x00, 0x08,
+ 0x11);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD3, 0x00, 0x00, 0x00, 0X00, 0x00,
+ 0x00, 0x18, 0x18, 0x32, 0x10, 0x09, 0x00, 0x09,
+ 0x32, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x11, 0x00, 0x02, 0x02, 0x03, 0x00,
+ 0x00, 0x00, 0x0A, 0x40);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD5, 0x18, 0x18, 0x18, 0x18, 0x21,
+ 0x20, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x18,
+ 0x18, 0x18, 0x18, 0x03, 0x02, 0x01, 0x00, 0x2F,
+ 0x2F, 0x30, 0x30, 0x31, 0x31, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD6, 0x18, 0x18, 0x18, 0x18, 0x20,
+ 0x21, 0x19, 0x19, 0x18, 0x18, 0x19, 0x19, 0x18,
+ 0x18, 0x18, 0x18, 0x00, 0x01, 0x02, 0x03, 0x2F,
+ 0x2F, 0x30, 0x30, 0x31, 0x31, 0x18, 0x18, 0x18,
+ 0x18, 0x18, 0x18);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xBD, 0x01);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD8, 0x0A, 0xBE, 0xFA, 0xA0, 0x0A,
+ 0xBE, 0xFA, 0xA0);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD8, 0x0F, 0xFF, 0xFF, 0xE0, 0x0F,
+ 0xFF, 0xFF, 0xE0);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xBD, 0x02);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xD8, 0x0F, 0xFF, 0xFF, 0xE0, 0x0F,
+ 0xFF, 0xFF, 0xE0);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xE0, 0x01, 0x11, 0x1C, 0x17, 0x39,
+ 0x43, 0x54, 0x51, 0x5A, 0x64, 0x6C, 0x74, 0x7A,
+ 0x83, 0x8D, 0x92, 0x99, 0xA4, 0xA9, 0xB4, 0xAA,
+ 0xBA, 0xBE, 0x63, 0x5E, 0x69, 0x73, 0x01, 0x11,
+ 0x1C, 0x17, 0x39, 0x43, 0x54, 0x51, 0x5A, 0x64,
+ 0x6C, 0x74, 0x7A, 0x83, 0x8D, 0x92, 0x99, 0xA4,
+ 0xA7, 0xB2, 0xA9, 0xBA, 0xBE, 0x63, 0x5E, 0x69,
+ 0x73);
+ usleep_range(200, 300);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xB6, 0x92, 0x92);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xCC, 0x00);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xBF, 0x40, 0x41, 0x50, 0x49);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xC6, 0xFF, 0xF9);
+ mipi_dsi_dcs_write_seq(lcd->dsi, 0xC0, 0x25, 0x5A);
+ mipi_dsi_dcs_write_seq(lcd->dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x02);
+
+ err = mipi_dsi_dcs_exit_sleep_mode(lcd->dsi);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
+ goto poweroff;
+ }
+ msleep(120);
+
+ err = mipi_dsi_dcs_read(lcd->dsi, MIPI_DCS_GET_DISPLAY_ID, display_id, 3);
+ if (err < 0) {
+ dev_err(panel->dev, "Failed to read display id: %d\n", err);
+ } else {
+ dev_dbg(panel->dev, "Display id: 0x%02x-0x%02x-0x%02x\n",
+ display_id[0], display_id[1], display_id[2]);
+ }
+
+ lcd->prepared = true;
+
+ return 0;
+
+poweroff:
+ gpiod_set_value_cansleep(lcd->enable_gpio, 0);
+ gpiod_set_value_cansleep(lcd->reset_gpio, 1);
+ regulator_disable(lcd->supply);
+
+ return err;
+}
+
+static int lincoln_lcd197_panel_unprepare(struct drm_panel *panel)
+{
+ struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel);
+ int err;
+
+ if (!lcd->prepared)
+ return 0;
+
+ lcd->prepared = false;
+
+ err = mipi_dsi_dcs_enter_sleep_mode(lcd->dsi);
+ if (err < 0)
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
+
+ usleep_range(5000, 6000);
+ gpiod_set_value_cansleep(lcd->enable_gpio, 0);
+ gpiod_set_value_cansleep(lcd->reset_gpio, 1);
+ regulator_disable(lcd->supply);
+
+ return err;
+}
+
+static int lincoln_lcd197_panel_enable(struct drm_panel *panel)
+{
+ struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel);
+ int err;
+
+ if (lcd->enabled)
+ return 0;
+
+ err = mipi_dsi_dcs_set_display_on(lcd->dsi);
+ if (err < 0) {
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
+ return err;
+ }
+
+ msleep(20);
+ lcd->enabled = true;
+
+ return 0;
+}
+
+static int lincoln_lcd197_panel_disable(struct drm_panel *panel)
+{
+ struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel);
+ int err;
+
+ if (!lcd->enabled)
+ return 0;
+
+ err = mipi_dsi_dcs_set_display_off(lcd->dsi);
+ if (err < 0)
+ dev_err(panel->dev, "failed to set display off: %d\n", err);
+
+
+ msleep(50);
+ lcd->enabled = false;
+
+ return 0;
+}
+
+static const struct drm_display_mode default_mode = {
+ .clock = 154002,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 20,
+ .hsync_end = 1080 + 20 + 6,
+ .htotal = 1080 + 204,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 4,
+ .vsync_end = 1920 + 4 + 4,
+ .vtotal = 1920 + 79,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static int lincoln_lcd197_panel_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(connector->dev, &default_mode);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(connector, mode);
+ connector->display_info.width_mm = 79;
+ connector->display_info.height_mm = 125;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs lincoln_lcd197_panel_funcs = {
+ .prepare = lincoln_lcd197_panel_prepare,
+ .unprepare = lincoln_lcd197_panel_unprepare,
+ .enable = lincoln_lcd197_panel_enable,
+ .disable = lincoln_lcd197_panel_disable,
+ .get_modes = lincoln_lcd197_panel_get_modes,
+};
+
+static int lincoln_lcd197_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct lincoln_lcd197_panel *lcd;
+ struct device *dev = &dsi->dev;
+ int err;
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
+ MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM);
+
+ lcd = devm_kzalloc(&dsi->dev, sizeof(*lcd), GFP_KERNEL);
+ if (!lcd)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, lcd);
+ lcd->dsi = dsi;
+
+ lcd->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(lcd->supply))
+ return dev_err_probe(dev, PTR_ERR(lcd->supply),
+ "failed to get power supply");
+
+ lcd->enable_gpio = devm_gpiod_get(dev, "enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(lcd->enable_gpio))
+ return dev_err_probe(dev, PTR_ERR(lcd->enable_gpio),
+ "failed to get enable gpio");
+
+ lcd->reset_gpio = devm_gpiod_get(dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(lcd->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(lcd->reset_gpio),
+ "failed to get reset gpio");
+
+ drm_panel_init(&lcd->panel, dev,
+ &lincoln_lcd197_panel_funcs, DRM_MODE_CONNECTOR_DSI);
+
+ err = drm_panel_of_backlight(&lcd->panel);
+ if (err)
+ return err;
+
+ drm_panel_add(&lcd->panel);
+ err = mipi_dsi_attach(dsi);
+ if (err)
+ drm_panel_remove(&lcd->panel);
+
+ return err;
+}
+
+static void lincoln_lcd197_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct lincoln_lcd197_panel *lcd = mipi_dsi_get_drvdata(dsi);
+
+ drm_panel_disable(&lcd->panel);
+ drm_panel_unprepare(&lcd->panel);
+}
+
+static void lincoln_lcd197_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct lincoln_lcd197_panel *lcd = mipi_dsi_get_drvdata(dsi);
+ int err;
+
+ err = mipi_dsi_detach(dsi);
+ if (err < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
+
+ lincoln_lcd197_panel_shutdown(dsi);
+ drm_panel_remove(&lcd->panel);
+}
+
+static const struct of_device_id lincoln_lcd197_of_match[] = {
+ { .compatible = "lincoln,lcd197", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, lincoln_lcd197_of_match);
+
+static struct mipi_dsi_driver lincoln_lcd197_panel_driver = {
+ .driver = {
+ .name = "panel-licoln-lcd197",
+ .of_match_table = lincoln_lcd197_of_match,
+ },
+ .probe = lincoln_lcd197_panel_probe,
+ .remove = lincoln_lcd197_panel_remove,
+ .shutdown = lincoln_lcd197_panel_shutdown,
+};
+module_mipi_dsi_driver(lincoln_lcd197_panel_driver);
+
+MODULE_AUTHOR("Jerome Brunet <jbrunet@...libre.com>");
+MODULE_DESCRIPTION("Lincoln LCD197 panel driver");
+MODULE_LICENSE("GPL");
--
2.43.0
Powered by blists - more mailing lists