linux-kernel - [PATCH] net: phy: phy_device: Fix PHY LED blinking code comment

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240626030638.512069-1-marex@denx.de>
Date: Wed, 26 Jun 2024 05:06:17 +0200
From: Marek Vasut <marex@...x.de>
To: netdev@...r.kernel.org
Cc: Marek Vasut <marex@...x.de>,
	Andrew Lunn <andrew@...n.ch>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	kernel@...electronics.com,
	linux-kernel@...r.kernel.org
Subject: [PATCH] net: phy: phy_device: Fix PHY LED blinking code comment

Fix copy-paste error in the code comment. The code refers to
LED blinking configuration, not brightness configuration. It
was likely copied from comment above this one which does
refer to brightness configuration.

Fixes: 4e901018432e ("net: phy: phy_device: Call into the PHY driver to set LED blinking")
Signed-off-by: Marek Vasut <marex@...x.de>
---
Cc: Andrew Lunn <andrew@...n.ch>
Cc: Heiner Kallweit <hkallweit1@...il.com>
Cc: Russell King <linux@...linux.org.uk>
Cc: kernel@...electronics.com
Cc: linux-kernel@...r.kernel.org
Cc: netdev@...r.kernel.org
---
 include/linux/phy.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 205fccfc0f60a..bd68f9d8e74f1 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1119,21 +1119,21 @@ struct phy_driver {
 	/**
 	 * @led_brightness_set: Set a PHY LED brightness. Index
 	 * indicates which of the PHYs led should be set. Value
 	 * follows the standard LED class meaning, e.g. LED_OFF,
 	 * LED_HALF, LED_FULL.
 	 */
 	int (*led_brightness_set)(struct phy_device *dev,
 				  u8 index, enum led_brightness value);
 
 	/**
-	 * @led_blink_set: Set a PHY LED brightness.  Index indicates
+	 * @led_blink_set: Set a PHY LED blinking.  Index indicates
 	 * which of the PHYs led should be configured to blink. Delays
 	 * are in milliseconds and if both are zero then a sensible
 	 * default should be chosen.  The call should adjust the
 	 * timings in that case and if it can't match the values
 	 * specified exactly.
 	 */
 	int (*led_blink_set)(struct phy_device *dev, u8 index,
 			     unsigned long *delay_on,
 			     unsigned long *delay_off);
 	/**
-- 
2.43.0