Message-ID: <667c3d97.050a0220.bdb34.0813@mx.google.com>
Date: Wed, 26 Jun 2024 18:11:09 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Lee Jones <lee@...nel.org>
Cc: Pavel Machek <pavel@....cz>, Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Jacek Anaszewski <jacek.anaszewski@...il.com>,
	linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 00/20] leds: leds-lp55xx: overhaul driver

On Wed, Jun 26, 2024 at 05:09:26PM +0100, Lee Jones wrote:
> On Wed, 26 Jun 2024, Lee Jones wrote:
> 
> > On Wed, 26 Jun 2024, Christian Marangi wrote:
> > 
> > > On Wed, Jun 26, 2024 at 04:42:55PM +0100, Lee Jones wrote:
> > > > On Thu, 20 Jun 2024, Christian Marangi wrote:
> > > > 
> > > > > This long series is (as requested) a big overhaul of the lp55xx based
> > > > > LED driver.
> > > > > 
> > > > > As notice for these kind of LED chip there was the bad habit of copy
> > > > > the old driver and just modify it enough to make it work with the new
> > > > > model. Till v4 I was also doing the same by following the pattern and
> > > > > the code format of previous driver.
> > > > > 
> > > > > Since Lee didn't like this, here is the BIG series that generalize
> > > > > pretty much anything in the 4 model currently supported.
> > > > > 
> > > > > Indeed, although the LED chip have fundamental difference (page
> > > > > support), things can be generalized and produce slimmer drivers by
> > > > > putting everything in the lp55xx-common shared module.
> > > > > 
> > > > > This result in the new model lp5569 being very small with only the
> > > > > selftest portion to be custom.
> > > > > 
> > > > > Lee also wasn't clear by the meaning of ENGINE in these LED driver,
> > > > > so here some simple explaination. This is very common on these TI LED
> > > > > chip. The ENGINE (there are always 3) is just some kind of processor
> > > > > that execute a program (precompiled code ASM like) loaded in the SRAM.
> > > > > Sysfs is used to load the pattern, and to start and stop the engine.
> > > > > 
> > > > > These pattern can do all kind of complex thing with LEDs. Old LED chip
> > > > > had 32bytes of space for the pattern but newer one (like lp5569) have
> > > > > pages and if correctly configured can have massive pattern.
> > > > > These pattern can do all kind of magic like loops that make the LED
> > > > > pulse, change color and all kind of stuff.
> > > > > 
> > > > > (For Lee, sorry if you will have to repeat some review that I might
> > > > >  have missed in the lp5569 driver)
> > > > > 
> > > > > Changes v7:
> > > > > - Add Suggested-by tag
> > > > > - Fix checkpatch error for complex macro (rework define)
> > > > > - Add missing values for fader conversion
> > > > > - Align some function with redundant new line
> > > > > - Capitalize every commit title
> > > > > Changes v6:
> > > > > - Fix compilation warning for ret unused in read_poll_timeout
> > > > >   (no idea why this is flagged only on some particular arch...)
> > > > > - Fix missing bitfield.h in lp55x-common.c (again it seems this
> > > > >   header gets included in the flow if the arch use them or not...)
> > > > > Changes v5:
> > > > > - Big generalization patch
> > > > > - Rework lp5569 driver with new generalized functions
> > > > > - Drop all copyright header in lp5569 as the driver got reworked
> > > > >   entirely and it's not based on previous one anymore.
> > > > > Changes v4:
> > > > > - Fix reported buffer overflow due to a copypaste error
> > > > > - Add comments to describe fw size logic
> > > > > Changes v3:
> > > > > - Add ACK tag to DT patch
> > > > > - Enlarge and support program size up to 128bytes
> > > > > Changes v2:
> > > > > - Add ACK tag to DT patch
> > > > > - Fix compilation error with target that doesn't
> > > > >   include bitfield.h
> > > > > 
> > > > > Christian Marangi (20):
> > > > >   dt-bindings: leds-lp55xx: Limit pwr-sel property to ti,lp8501
> > > > >   dt-bindings: leds-lp55xx: Add new ti,lp5569 compatible
> > > > >   leds: leds-lp55xx: Generalize stop_all_engine OP
> > > > >   leds: leds-lp55xx: Generalize probe/remove functions
> > > > >   leds: leds-lp55xx: Generalize load_engine function
> > > > >   leds: leds-lp55xx: Generalize load_engine_and_select_page function
> > > > >   leds: leds-lp55xx: Generalize run_engine function
> > > > >   leds: leds-lp55xx: Generalize update_program_memory function
> > > > >   leds: leds-lp55xx: Generalize firmware_loaded function
> > > > >   leds: leds-lp55xx: Generalize led_brightness function
> > > > >   leds: leds-lp55xx: Generalize multicolor_brightness function
> > > > >   leds: leds-lp55xx: Generalize set_led_current function
> > > > >   leds: leds-lp55xx: Generalize turn_off_channels function
> > > > >   leds: leds-lp55xx: Generalize stop_engine function
> > > > >   leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
> > > > >   leds: leds-lp55xx: Generalize sysfs engine_leds
> > > > >   leds: leds-lp55xx: Generalize sysfs master_fader
> > > > >   leds: leds-lp55xx: Support ENGINE program up to 128 bytes
> > > > >   leds: leds-lp55xx: Drop deprecated defines
> > > > >   leds: leds-lp5569: Add support for Texas Instruments LP5569
> > > > > 
> > > > >  .../devicetree/bindings/leds/leds-lp55xx.yaml |  11 +
> > > > >  drivers/leds/Kconfig                          |  16 +-
> > > > >  drivers/leds/Makefile                         |   1 +
> > > > >  drivers/leds/leds-lp5521.c                    | 405 +---------
> > > > >  drivers/leds/leds-lp5523.c                    | 734 ++---------------
> > > > >  drivers/leds/leds-lp5562.c                    | 261 +-----
> > > > >  drivers/leds/leds-lp5569.c                    | 544 +++++++++++++
> > > > >  drivers/leds/leds-lp55xx-common.c             | 743 +++++++++++++++++-
> > > > >  drivers/leds/leds-lp55xx-common.h             | 163 ++--
> > > > >  drivers/leds/leds-lp8501.c                    | 313 +-------
> > > > >  10 files changed, 1540 insertions(+), 1651 deletions(-)
> > > > >  create mode 100644 drivers/leds/leds-lp5569.c
> > > > 
> > > > For whatever reason, this no longer applies.
> > > > 
> > > > Please rebase it on Linux -next or for-leds-next and resubmit.
> > > >
> > > 
> > > Hi Lee.,
> > > 
> > > I just checked and yes there is to rebase the series due to
> > > c0e3d2beeb03 ("leds: Drop explicit initialization of struct
> > > i2c_device_id::driver_data to 0")
> > > 
> > > But I notice that something went bad in reverting some commits from the
> > > v7 series and in for-leds-next there are still 3 commit to drop
> > > 
> > > mainly 
> > > - 3bed6364ffd0057bd10c081d2e24aa7e8555e0a8
> > > - 3bcc6d6ad7821aa459826592f830d76a3dc6f79f
> > > - 5a402b40c651baf758ad884aed36c0ea70cd8b1e
> > > 
> > > I'm sending v8 with everything rebased but please keep in mind that
> > > those commits needs to be reverted as the leds one also somehow got half
> > > applied (no idea what happen)
> > 
> > This must be related to the tooling error that happened recently.
> > 
> > I have removed those 3 patches from the tree and re-pushed the branch.
> > 
> > If you need to rebase again for-leds-next is now up-to-date.
> 
> Okay v8 applied without issues.
> 
> Thank you.
>

Happy to have this finally merged and sorry for the big series and for
the mess.

Again thank to you for review and accept the changes!

-- 
	Ansuel

Powered by blists - more mailing lists