| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240626202533.2182846-3-Frank.Li@nxp.com>
Date: Wed, 26 Jun 2024 16:25:22 -0400
From: Frank Li <Frank.Li@....com>
To: Shawn Guo <shawnguo@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio
Add platform special compatible string for all gpio controller to fix
below warning.
gpio@...0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,qoriq-gpio'] is too short
'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']
Signed-off-by: Frank Li <Frank.Li@....com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 2e1cddc11bf47..1b6ab9550cce9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -407,7 +407,7 @@ duart1: serial@...0600 {
};
gpio0: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -417,7 +417,7 @@ gpio0: gpio@...0000 {
};
gpio1: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f8c9489507e7a..524b44f424272 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -589,7 +589,7 @@ duart3: serial@...0600 {
};
gpio0: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -599,7 +599,7 @@ gpio0: gpio@...0000 {
};
gpio1: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -609,7 +609,7 @@ gpio1: gpio@...0000 {
};
gpio2: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -619,7 +619,7 @@ gpio2: gpio@...0000 {
};
gpio3: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 40159f58c6f94..da49f274e9d5a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1027,7 +1027,7 @@ QORIQ_CLK_PLL_DIV(8)>,
};
gpio0: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -1038,7 +1038,7 @@ gpio0: gpio@...0000 {
};
gpio1: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -1049,7 +1049,7 @@ gpio1: gpio@...0000 {
};
gpio2: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -1060,7 +1060,7 @@ gpio2: gpio@...0000 {
};
gpio3: gpio@...0000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
--
2.34.1
Powered by blists - more mailing lists