lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240626052925.174272-2-warthog618@gmail.com>
Date: Wed, 26 Jun 2024 13:29:22 +0800
From: Kent Gibson <warthog618@...il.com>
To: linux-kernel@...r.kernel.org,
	linux-gpio@...r.kernel.org,
	brgl@...ev.pl,
	linus.walleij@...aro.org
Cc: Kent Gibson <warthog618@...il.com>
Subject: [PATCH 1/4] gpiolib: cdev: Disallow reconfiguration without direction (uAPI v1)

linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.

Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.

For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.

Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.

And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.

Fixes: e588bb1eae31 ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@...il.com>
---
 drivers/gpio/gpiolib-cdev.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index 1cb952daacfb..f7a129d67b7d 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -89,6 +89,10 @@ struct linehandle_state {
 	GPIOHANDLE_REQUEST_OPEN_DRAIN | \
 	GPIOHANDLE_REQUEST_OPEN_SOURCE)
 
+#define GPIOHANDLE_REQUEST_DIRECTION_FLAGS \
+	(GPIOHANDLE_REQUEST_INPUT | \
+	 GPIOHANDLE_REQUEST_OUTPUT)
+
 static int linehandle_validate_flags(u32 flags)
 {
 	/* Return an error if an unknown flag is set */
@@ -169,21 +173,21 @@ static long linehandle_set_config(struct linehandle_state *lh,
 	if (ret)
 		return ret;
 
+	/* Lines must be reconfigured explicitly as input or output. */
+	if (!(lflags & GPIOHANDLE_REQUEST_DIRECTION_FLAGS))
+		return -EINVAL;
+
 	for (i = 0; i < lh->num_descs; i++) {
 		desc = lh->descs[i];
-		linehandle_flags_to_desc_flags(gcnf.flags, &desc->flags);
+		linehandle_flags_to_desc_flags(lflags, &desc->flags);
 
-		/*
-		 * Lines have to be requested explicitly for input
-		 * or output, else the line will be treated "as is".
-		 */
 		if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
 			int val = !!gcnf.default_values[i];
 
 			ret = gpiod_direction_output(desc, val);
 			if (ret)
 				return ret;
-		} else if (lflags & GPIOHANDLE_REQUEST_INPUT) {
+		} else {
 			ret = gpiod_direction_input(desc);
 			if (ret)
 				return ret;
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ