[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4391083991a16c435c5d8849eb5ee2be2f03793c.camel@codeconstruct.com.au>
Date: Wed, 26 Jun 2024 11:00:35 +0930
From: Andrew Jeffery <andrew@...econstruct.com.au>
To: Yang Chen <yangchen.openbmc@...il.com>, joel@....id.au,
patrick@...cx.xyz, linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org
Cc: Jerry.Lin@...ntatw.com
Subject: Re: [PATCH 02/17] ARM: dts: aspeed: minerva: Add spi-gpio
On Tue, 2024-06-25 at 20:18 +0800, Yang Chen wrote:
> From: Yang Chen <yang.chen@...ntatw.com>
>
> Add spi-gpio for TPM device.
>
> Signed-off-by: Yang Chen <yang.chen@...ntatw.com>
> ---
> .../aspeed/aspeed-bmc-facebook-minerva.dts | 21 +++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
> index e20e31917d6c..7d96a3638448 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
> @@ -22,6 +22,8 @@ aliases {
> i2c19 = &imux19;
> i2c20 = &imux20;
> i2c21 = &imux21;
> +
> + spi1 = &spi_gpio;
> };
>
> chosen {
> @@ -49,6 +51,25 @@ led-fan-fault {
> default-state = "off";
> };
> };
> +
> + spi_gpio: spi-gpio {
> + status = "okay";
> + compatible = "spi-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
> + gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
> + gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
> + num-chipselects = <1>;
> + cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
> +
> + tpmdev@0 {
> + compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
> + spi-max-frequency = <33000000>;
> + reg = <0>;
> + };
> + };
I poked at your series with the following script:
```
$ cat dtb-check
#!/usr/bin/bash
set -euo pipefail
DTB="$1"
rm -f arch/arm/boot/dts/"$DTB"
make CHECK_DTBS=y "$DTB" 2>&1 |
sed "/should not be valid under {'type': 'object'}/d" > curr.log
diff -u ref.log curr.log
```
I ran this after creating a reference output prior to your series using
the same `make CHECK_DTBS=y` command.
This patch gave the following output (which I expect Rob's bot will
follow up with at some point as well):
```
--- ref.log 2024-06-26 10:48:23.767078834 +0930
+++ curr.log 2024-06-26 10:55:56.857034132 +0930
@@ -1,4 +1,6 @@
DTC_CHK arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: /: spi-gpio: {'status': ['okay'], 'compatible': ['spi-gpio'], '#address-cells': [[1]], '#size-cells': [[0]], 'gpio-sck': [[62, 203, 0]], 'gpio-mosi': [[62, 204, 0]], 'gpio-miso': [[62, 205, 0]], 'num-chipselects': [[1]], 'cs-gpios': [[62, 200, 1]], 'tpmdev@0': {'compatible': ['infineon,slb9670', 'tcg,tpm_tis-spi'], 'spi-max-frequency': [[33000000]], 'reg': [[0]]}} is not of type 'array'
+ from schema $id: http://devicetree.org/schemas/gpio/gpio-consumer.yaml#
/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml#
/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: sdram@...e0000: compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] is too long
@@ -38,3 +40,17 @@
from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml#
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: /ahb/apb/fsi@...9b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master']
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: /ahb/apb/dma-controller@...9e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: spi-gpio: $nodename:0: 'spi-gpio' does not match '^spi(@.*|-([0-9]|[1-9][0-9]+))?$'
+ from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: spi-gpio: gpio-sck: False schema does not allow [[62, 203, 0]]
+ from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: spi-gpio: gpio-miso: False schema does not allow [[62, 205, 0]]
+ from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: spi-gpio: gpio-mosi: False schema does not allow [[62, 204, 0]]
+ from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: spi-gpio: 'sck-gpios' is a required property
+ from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: spi-gpio: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'gpio-miso', 'gpio-mosi', 'gpio-sck', 'tpmdev@0' were unexpected)
+ from schema $id: http://devicetree.org/schemas/spi/spi-gpio.yaml#
+/home/andrew/src/kernel.org/linux/origin/build.aspeed_g5/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dtb: tpmdev@0: $nodename:0: 'tpmdev@0' does not match '^tpm(@[0-9a-f]+)?$'
+ from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#
```
Can you please address these and go over the rest of the patches to
shore them up against the current bindings?
Thanks,
Andrew
Powered by blists - more mailing lists