[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240626104002.420535-2-quic_varada@quicinc.com>
Date: Wed, 26 Jun 2024 16:09:54 +0530
From: Varadarajan Narayanan <quic_varada@...cinc.com>
To: <robh@...nel.org>, <krzk+dt@...nel.org>, <conor+dt@...nel.org>,
<angelogioacchino.delregno@...labora.com>, <andersson@...nel.org>,
<konrad.dybcio@...aro.org>, <mturquette@...libre.com>,
<sboyd@...nel.org>, <ilia.lin@...nel.org>, <rafael@...nel.org>,
<viresh.kumar@...aro.org>, <ulf.hansson@...aro.org>,
<quic_sibis@...cinc.com>, <otto.pflueger@...cue.de>,
<neil.armstrong@...aro.org>, <luca@...tu.xyz>, <abel.vesa@...aro.org>,
<danila@...xyga.com>, <quic_varada@...cinc.com>,
<quic_ipkumar@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-clk@...r.kernel.org>, <linux-pm@...r.kernel.org>
Subject: [PATCH v3 1/9] soc: qcom: cpr3: Fix 'acc_desc' usage
cpr3 code assumes that 'acc_desc' is available for SoCs
implementing CPR version 4 or less. However, IPQ9574 SoC
implements CPRv4 without ACC. This causes NULL pointer accesses
resulting in crashes. Hence, check is 'acc_desc' is populated
before using it.
Signed-off-by: Varadarajan Narayanan <quic_varada@...cinc.com>
---
drivers/pmdomain/qcom/cpr3.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c
index c7790a71e74f..c28028be50d8 100644
--- a/drivers/pmdomain/qcom/cpr3.c
+++ b/drivers/pmdomain/qcom/cpr3.c
@@ -2399,12 +2399,12 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain,
if (ret)
goto exit;
- if (acc_desc->config)
+ if (acc_desc && acc_desc->config)
regmap_multi_reg_write(drv->tcsr, acc_desc->config,
acc_desc->num_regs_per_fuse);
/* Enable ACC if required */
- if (acc_desc->enable_mask)
+ if (acc_desc && acc_desc->enable_mask)
regmap_update_bits(drv->tcsr, acc_desc->enable_reg,
acc_desc->enable_mask,
acc_desc->enable_mask);
@@ -2676,7 +2676,7 @@ static int cpr_probe(struct platform_device *pdev)
desc = data->cpr_desc;
/* CPRh disallows MEM-ACC access from the HLOS */
- if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH)
+ if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPR4)
return -EINVAL;
drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
@@ -2703,7 +2703,7 @@ static int cpr_probe(struct platform_device *pdev)
mutex_init(&drv->lock);
- if (desc->cpr_type < CTRL_TYPE_CPRH) {
+ if (desc->cpr_type < CTRL_TYPE_CPR4) {
np = of_parse_phandle(dev->of_node, "qcom,acc", 0);
if (!np)
return -ENODEV;
--
2.34.1
Powered by blists - more mailing lists