lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5bbf813f-9a7b-467b-a2c7-6bc21ea85ef8@broadcom.com>
Date: Wed, 26 Jun 2024 12:31:53 +0100
From: Florian Fainelli <florian.fainelli@...adcom.com>
To: Stanimir Varbanov <svarbanov@...e.de>, linux-kernel@...r.kernel.org,
 devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 linux-rpi-kernel@...ts.infradead.org, linux-pci@...r.kernel.org,
 Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>
Cc: Thomas Gleixner <tglx@...utronix.de>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Jim Quinlan <jim2101024@...il.com>,
 Nicolas Saenz Julienne <nsaenz@...nel.org>,
 Bjorn Helgaas <bhelgaas@...gle.com>,
 Lorenzo Pieralisi <lpieralisi@...nel.org>, kw@...ux.com,
 Philipp Zabel <p.zabel@...gutronix.de>,
 Andrea della Porta <andrea.porta@...e.com>,
 Phil Elwell <phil@...pberrypi.com>, Jonathan Bell <jonathan@...pberrypi.com>
Subject: Re: [PATCH 0/7] Add PCIe support for bcm2712

Hi,

On 26/06/2024 11:45, Stanimir Varbanov wrote:
> This patchset aims to add bare minimum support for bcm2712
> in brcmstb PCIe driver needed to support the peripherals from
> RP1 south-bridge found in RPi5. In order to support RP1
> PCIe endpoint peripherals a new interrupt controller is added.
> The interrupt controller supports 64 interrupt sources which
> are enough to handle 61 RP1 peripherals.
> 
> Patch 1 is adding DT binding schema for the MIP interrupt
> controller, patch 2 is adding relevant changes for PCIe
> bcm2712 in yaml. Patch 3 adds MIP intterrupt cotroller driver.
> Patches 4 and 5 are preparations for adding bcm2712 support in 6.
> The last patch updates bcm2712 .dsti by adding pcie DT nodes.
> 
> Few concerns about the implementation:
>   - the connection between MIP interrupt-controller and PCIe RC is
>     done through BAR1. The PCIe driver is parsing the msi_parent
>     DT property in order to obtain few private DT properties like
>     "brcm,msi-pci-addr" and "reg". IMO this looks hackish but I failed
>     to find something better. Ideas?
> 
>   - in downstream RPi kernel "ranges" and "dma-ranges" DT properties
>     are under an axi {} simple-bus node even that PCIe block is on CPU
>     MMIO bus. I tried to merge axi {} in soc {} and the result could be
>     seen on the last patch in this series, but I'm still not sure that
>     it looks good enough.
> 
> This series has been functionally tested on OpenSUSE Tumbleweed with
> downstream RP1 south-bridge PCIe endpoint driver implementation as
> MFD by using ethernet which is part of it.
> 
> The series is based on Andrea's "Add minimal boot support for Raspberry Pi 5"
> series.
> 
> Comments are welcome!

We are just about submitting support for 7712 which is the sister chip 
of 2712 and requires similar, if not identical types of changes to 
pcie-brcmstb.c, would you mind reviewing that patch series when it gets 
posted by Jim in the next few days, and base yours upon that one? It 
does separate changes in a more atomic and a more reviewer friendly 
rather than having one big commit modifying pcie-brcmstb.c

Thanks.
-- 
Florian

Download attachment "smime.p7s" of type "application/pkcs7-signature" (4221 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ