linux-kernel - Re: [PATCH v5 3/7] dt-bindings: mikrobus: Add mikrobus-spi binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <171951606546.381506.1857123060155544778.robh@kernel.org>
Date: Thu, 27 Jun 2024 13:21:05 -0600
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Ayush Singh <ayush@...gleboard.org>
Cc: Vignesh Raghavendra <vigneshr@...com>, Mark Brown <broonie@...nel.org>, 
 jkridner@...gleboard.org, devicetree@...r.kernel.org, 
 Arnd Bergmann <arnd@...db.de>, Derek Kiernan <derek.kiernan@....com>, 
 Tero Kristo <kristo@...nel.org>, linux-arm-kernel@...ts.infradead.org, 
 Nishanth Menon <nm@...com>, linux-spi@...r.kernel.org, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Andrew Lunn <andrew@...n.ch>, 
 robertcnelson@...gleboard.org, Dragan Cvetic <dragan.cvetic@....com>, 
 linux-kernel@...r.kernel.org, Conor Dooley <conor+dt@...nel.org>, 
 Vaishnav M A <vaishnav@...gleboard.org>, 
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>, 
 Michael Walle <mwalle@...nel.org>
Subject: Re: [PATCH v5 3/7] dt-bindings: mikrobus: Add mikrobus-spi binding


On Thu, 27 Jun 2024 21:56:13 +0530, Ayush Singh wrote:
> Add bindings for MikroBUS boards using SPI interface.
> 
> Almost all of the properties that are valid for SPI devices can be used
> except reg. Since the goal is to allow use of the same MikroBUS board
> across different connectors, config needs to be independent of the actual
> SPI controller in mikroBUS port(s), it is not possible to define the
> chipselect by number in advance. Thus, `spi-cs-apply` property is used to
> specify the chipselect(s) by name.
> 
> Another important fact is that while there is a CS pin in the mikroBUS
> connector, some boards (eg SPI Extend Click) use additional pins as
> chipselect. Thus we need a way to specify the CS pin(s) in terms of
> mikcrobus-connector which can then handle bindings the actual CS pin(s).
> 
> Link: https://www.mikroe.com/spi-extend-click SPI Extend Click
> 
> Signed-off-by: Ayush Singh <ayush@...gleboard.org>
> ---
>  .../devicetree/bindings/mikrobus/mikrobus-spi.yaml | 37 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 38 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: thermo-click: compatible: ['maxim,max31855k', 'mikrobus,spi'] is too long
	from schema $id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: thermo-click: 'reg' is a required property
	from schema $id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: thermo-click: Unevaluated properties are not allowed ('compatible', 'pinctrl-apply', 'spi-cs-apply' were unexpected)
	from schema $id: http://devicetree.org/schemas/iio/temperature/maxim,max31855k.yaml#
Documentation/devicetree/bindings/mikrobus/mikrobus-spi.example.dtb: /example-0/thermo-click: failed to match any schema with compatible: ['maxim,max31855k', 'mikrobus,spi']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627-mikrobus-scratch-spi-v5-3-9e6c148bf5f0@beagleboard.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.