| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 27 Jun 2024 17:59:56 -0400
From: Frank Li <Frank.Li@....com>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
imx@...ts.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH 2/7] arm64: dts: imx95: add sai[1..6], xcvr and micfill
Add sai[1..6], NXP Audio Transceiver (XCVR) Controller and MICFIL Digital
Audio Interface (MICFIL).
Signed-off-by: Frank Li <Frank.Li@....com>
---
arch/arm64/boot/dts/freescale/imx95.dtsi | 111 +++++++++++++++++++++++
1 file changed, 111 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 12f7ac52c2589..d32127cf7018a 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -222,6 +222,13 @@ core5 {
};
};
+ dummy: clock-dummy {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "dummy";
+ };
+
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -706,6 +713,64 @@ lpuart6: serial@...a0000 {
status = "disabled";
};
+ sai3: sai@...50000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x42650000 0x10000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI3>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai4: sai@...60000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x42660000 0x10000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI4>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ sai5: sai@...70000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x42670000 0x10000>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI5>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ xcvr: xcvr@...80000 {
+ compatible = "fsl,imx95-xcvr";
+ reg = <0x42680000 0x800>, <0x42680800 0x400>,
+ <0x42680c00 0x080>, <0x42680e00 0x080>;
+ reg-names = "ram", "regs", "rxfifo", "txfifo";
+ interrupts = /* XCVR IRQ 0 */
+ <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+ /* XCVR IRQ 1 */
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+ <&scmi_clk IMX95_CLK_SPDIF>,
+ <&dummy>,
+ <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+ clock-names = "ipg", "phy", "spba", "pll_ipg";
+ dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
lpuart7: serial@...90000 {
compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
"fsl,imx7ulp-lpuart";
@@ -1124,6 +1189,38 @@ lpuart2: serial@...90000 {
status = "disabled";
};
+ sai1: sai@...b0000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x443b0000 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
+
+ micfil: micfil@...20000 {
+ compatible = "fsl,imx95-micfil", "fsl,imx93-micfil";
+ reg = <0x44520000 0x10000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+ <&scmi_clk IMX95_CLK_PDM>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+ <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+ <&dummy>;
+ clock-names = "ipg_clk", "ipg_clk_app",
+ "pll8k", "pll11k", "clkext3";
+ dmas = <&edma1 6 0 5>;
+ dma-names = "rx";
+ status = "disabled";
+ };
+
adc1: adc@...30000 {
compatible = "nxp,imx93-adc";
reg = <0x44530000 0x10000>;
@@ -1423,5 +1520,19 @@ pcie1_ep: pcie-ep@...80000 {
power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
status = "disabled";
};
+
+ sai2: sai@...80000 {
+ compatible = "fsl,imx95-sai";
+ reg = <0x0 0x4c880000 0x0 0x10000>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>,
+ <&scmi_clk IMX95_CLK_SAI2>, <&dummy>,
+ <&dummy>;
+ clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+ power-domains = <&scmi_devpd IMX95_PD_NETC>;
+ dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
};
};
--
2.34.1
Powered by blists - more mailing lists