| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ed3e13c0-1e2e-428f-ae78-f30d590effb4@phytec.de>
Date: Thu, 27 Jun 2024 10:47:47 +0200
From: Wadim Egorov <w.egorov@...tec.de>
To: Garrett Giordano <ggiordano@...tec.com>, <nm@...com>, <vigneshr@...com>,
<kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <upstream@...ts.phytec.de>
Subject: Re: [PATCH v2 2/4] arm64: dts: ti: Add am62x-phyboard-lyra carrier
board
Am 26.06.24 um 17:52 schrieb Garrett Giordano:
> PHYTECs phyBOARD-Lyra carrier board is able to accomidate multiple SoMs.
> Refactor k3-am625-phyboard-lyra-rdk.dts into an include file so it can
> be reused in combination with our phyCORE-AM62Ax SoM.
>
> Signed-off-by: Garrett Giordano <ggiordano@...tec.com>
Reviewed-by: Wadim Egorov <w.egorov@...tec.de>
> ---
> -v2
> - Reformat patches using -B/-M/-C arguments
> ---
> .../dts/ti/k3-am625-phyboard-lyra-rdk.dts | 501 +-----------------
> ...ra-rdk.dts => k3-am62x-phyboard-lyra.dtsi} | 8 -
> 2 files changed, 18 insertions(+), 491 deletions(-)
> rewrite arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts (96%)
> copy arch/arm64/boot/dts/ti/{k3-am625-phyboard-lyra-rdk.dts => k3-am62x-phyboard-lyra.dtsi} (97%)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> dissimilarity index 96%
> index 50d2573c840e..4fa5efdffcd7 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> @@ -1,483 +1,18 @@
> -// SPDX-License-Identifier: GPL-2.0-only OR MIT
> -/*
> - * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
> - * Author: Wadim Egorov <w.egorov@...tec.de>
> - *
> - * Product homepage:
> - * https://www.phytec.com/product/phyboard-am62x
> - */
> -
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/input/input.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/net/ti-dp83867.h>
> -#include "k3-am625.dtsi"
> -#include "k3-am62-phycore-som.dtsi"
> -
> -/ {
> - compatible = "phytec,am625-phyboard-lyra-rdk",
> - "phytec,am62-phycore-som", "ti,am625";
> - model = "PHYTEC phyBOARD-Lyra AM625";
> -
> - aliases {
> - serial2 = &main_uart0;
> - serial3 = &main_uart1;
> - mmc1 = &sdhci1;
> - usb0 = &usb0;
> - usb1 = &usb1;
> - ethernet1 = &cpsw_port2;
> - };
> -
> - can_tc1: can-phy0 {
> - compatible = "ti,tcan1042";
> - #phy-cells = <0>;
> - max-bitrate = <8000000>;
> - standby-gpios = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
> - };
> -
> - hdmi0: connector-hdmi {
> - compatible = "hdmi-connector";
> - label = "hdmi";
> - type = "a";
> -
> - port {
> - hdmi_connector_in: endpoint {
> - remote-endpoint = <&sii9022_out>;
> - };
> - };
> - };
> -
> - keys {
> - compatible = "gpio-keys";
> - autorepeat;
> - pinctrl-names = "default";
> - pinctrl-0 = <&gpio_keys_pins_default>;
> -
> - key-home {
> - label = "home";
> - linux,code = <KEY_HOME>;
> - gpios = <&main_gpio1 23 GPIO_ACTIVE_HIGH>;
> - };
> -
> - key-menu {
> - label = "menu";
> - linux,code = <KEY_MENU>;
> - gpios = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
> - };
> - };
> -
> - sound {
> - compatible = "simple-audio-card";
> - simple-audio-card,name = "phyBOARD-Lyra";
> - simple-audio-card,widgets =
> - "Microphone", "Mic Jack",
> - "Headphone", "Headphone Jack",
> - "Speaker", "External Speaker";
> - simple-audio-card,routing =
> - "MIC3R", "Mic Jack",
> - "Mic Jack", "Mic Bias",
> - "Headphone Jack", "HPLOUT",
> - "Headphone Jack", "HPROUT",
> - "External Speaker", "SPOP",
> - "External Speaker", "SPOM";
> - simple-audio-card,format = "dsp_b";
> - simple-audio-card,bitclock-master = <&sound_master>;
> - simple-audio-card,frame-master = <&sound_master>;
> - simple-audio-card,bitclock-inversion;
> -
> - simple-audio-card,cpu {
> - sound-dai = <&mcasp2>;
> - };
> -
> - sound_master: simple-audio-card,codec {
> - sound-dai = <&audio_codec>;
> - clocks = <&audio_refclk1>;
> - };
> - };
> -
> - leds {
> - compatible = "gpio-leds";
> - pinctrl-names = "default";
> - pinctrl-0 = <&leds_pins_default>, <&user_leds_pins_default>;
> -
> - led-1 {
> - gpios = <&main_gpio0 32 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "mmc0";
> - };
> -
> - led-2 {
> - gpios = <&gpio_exp 2 GPIO_ACTIVE_HIGH>;
> - linux,default-trigger = "mmc1";
> - };
> - };
> -
> - vcc_1v8: regulator-vcc-1v8 {
> - compatible = "regulator-fixed";
> - regulator-name = "VCC_1V8";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc_3v3_mmc: regulator-vcc-3v3-mmc {
> - compatible = "regulator-fixed";
> - regulator-name = "VCC_3V3_MMC";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vcc_3v3_sw: regulator-vcc-3v3-sw {
> - compatible = "regulator-fixed";
> - regulator-name = "VCC_3V3_SW";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -};
> -
> -&main_pmx0 {
> - audio_ext_refclk1_pins_default: audio-ext-refclk1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0a0, PIN_OUTPUT, 1) /* (K25) GPMC0_WPn.AUDIO_EXT_REFCLK1 */
> - >;
> - };
> -
> - gpio_keys_pins_default: gpio-keys-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
> - >;
> - };
> -
> - gpio_exp_int_pins_default: gpio-exp-int-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x244, PIN_INPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
> - >;
> - };
> -
> - hdmi_int_pins_default: hdmi-int-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x040, PIN_INPUT, 7) /* (N23) GPMC0_AD1.GPIO0_16 */
> - >;
> - };
> -
> - main_dss0_pins_default: main-dss0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x0b8, PIN_OUTPUT, 0) /* (U22) VOUT0_DATA0 */
> - AM62X_IOPAD(0x0bc, PIN_OUTPUT, 0) /* (V24) VOUT0_DATA1 */
> - AM62X_IOPAD(0x0e0, PIN_OUTPUT, 0) /* (V20) VOUT0_DATA10 */
> - AM62X_IOPAD(0x0e4, PIN_OUTPUT, 0) /* (AA23) VOUT0_DATA11 */
> - AM62X_IOPAD(0x0e8, PIN_OUTPUT, 0) /* (AB25) VOUT0_DATA12 */
> - AM62X_IOPAD(0x0ec, PIN_OUTPUT, 0) /* (AA24) VOUT0_DATA13 */
> - AM62X_IOPAD(0x0f0, PIN_OUTPUT, 0) /* (Y22) VOUT0_DATA14 */
> - AM62X_IOPAD(0x0f4, PIN_OUTPUT, 0) /* (AA21) VOUT0_DATA15 */
> - AM62X_IOPAD(0x0c0, PIN_OUTPUT, 0) /* (W25) VOUT0_DATA2 */
> - AM62X_IOPAD(0x0c4, PIN_OUTPUT, 0) /* (W24) VOUT0_DATA3 */
> - AM62X_IOPAD(0x0c8, PIN_OUTPUT, 0) /* (Y25) VOUT0_DATA4 */
> - AM62X_IOPAD(0x0cc, PIN_OUTPUT, 0) /* (Y24) VOUT0_DATA5 */
> - AM62X_IOPAD(0x0d0, PIN_OUTPUT, 0) /* (Y23) VOUT0_DATA6 */
> - AM62X_IOPAD(0x0d4, PIN_OUTPUT, 0) /* (AA25) VOUT0_DATA7 */
> - AM62X_IOPAD(0x0d8, PIN_OUTPUT, 0) /* (V21) VOUT0_DATA8 */
> - AM62X_IOPAD(0x0dc, PIN_OUTPUT, 0) /* (W21) VOUT0_DATA9 */
> - AM62X_IOPAD(0x0fc, PIN_OUTPUT, 0) /* (Y20) VOUT0_DE */
> - AM62X_IOPAD(0x0f8, PIN_OUTPUT, 0) /* (AB24) VOUT0_HSYNC */
> - AM62X_IOPAD(0x104, PIN_OUTPUT, 0) /* (AC24) VOUT0_PCLK */
> - AM62X_IOPAD(0x100, PIN_OUTPUT, 0) /* (AC25) VOUT0_VSYNC */
> - >;
> - };
> -
> - main_i2c1_pins_default: main-i2c1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
> - AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
> - >;
> - };
> -
> - main_mcan0_pins_default: main-mcan0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1dc, PIN_INPUT, 0) /* (E15) MCAN0_RX */
> - AM62X_IOPAD(0x1d8, PIN_OUTPUT, 0) /* (C15) MCAN0_TX */
> - >;
> - };
> -
> - main_mcasp2_pins_default: main-mcasp2-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x070, PIN_INPUT, 3) /* (T24) GPMC0_AD13.MCASP2_ACLKX */
> - AM62X_IOPAD(0x06c, PIN_INPUT, 3) /* (T22) GPMC0_AD12.MCASP2_AFSX */
> - AM62X_IOPAD(0x064, PIN_OUTPUT, 3) /* (T25) GPMC0_AD10.MCASP2_AXR2 */
> - AM62X_IOPAD(0x068, PIN_INPUT, 3) /* (R21) GPMC0_AD11.MCASP2_AXR3 */
> - >;
> - };
> -
> - main_mmc1_pins_default: main-mmc1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x23c, PIN_INPUT_PULLUP, 0) /* (A21) MMC1_CMD */
> - AM62X_IOPAD(0x234, PIN_INPUT_PULLDOWN, 0) /* (B22) MMC1_CLK */
> - AM62X_IOPAD(0x230, PIN_INPUT_PULLUP, 0) /* (A22) MMC1_DAT0 */
> - AM62X_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (B21) MMC1_DAT1 */
> - AM62X_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (C21) MMC1_DAT2 */
> - AM62X_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (D22) MMC1_DAT3 */
> - AM62X_IOPAD(0x240, PIN_INPUT_PULLUP, 0) /* (D17) MMC1_SDCD */
> - >;
> - };
> -
> - main_rgmii2_pins_default: main-rgmii2-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
> - AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
> - AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
> - AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
> - AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
> - AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
> - AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
> - AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
> - AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
> - AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
> - AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
> - AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
> - >;
> - };
> -
> - main_uart0_pins_default: main-uart0-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
> - AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
> - >;
> - };
> -
> - main_uart1_pins_default: main-uart1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x194, PIN_INPUT, 2) /* (B19) MCASP0_AXR3.UART1_CTSn */
> - AM62X_IOPAD(0x198, PIN_OUTPUT, 2) /* (A19) MCASP0_AXR2.UART1_RTSn */
> - AM62X_IOPAD(0x1ac, PIN_INPUT, 2) /* (E19) MCASP0_AFSR.UART1_RXD */
> - AM62X_IOPAD(0x1b0, PIN_OUTPUT, 2) /* (A20) MCASP0_ACLKR.UART1_TXD */
> - >;
> - };
> -
> - main_usb1_pins_default: main-usb1-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x258, PIN_OUTPUT, 0) /* (F18) USB1_DRVVBUS */
> - >;
> - };
> -
> - user_leds_pins_default: user-leds-default-pins {
> - pinctrl-single,pins = <
> - AM62X_IOPAD(0x084, PIN_OUTPUT, 7) /* (L23) GPMC0_ADVn_ALE.GPIO0_32 */
> - >;
> - };
> -};
> -
> -&cpsw3g {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
> -};
> -
> -&cpsw_port2 {
> - phy-mode = "rgmii-rxid";
> - phy-handle = <&cpsw3g_phy3>;
> -};
> -
> -&cpsw3g_mdio {
> - cpsw3g_phy3: ethernet-phy@3 {
> - compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
> - reg = <3>;
> - ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
> - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> - ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> - };
> -};
> -
> -&dss {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_dss0_pins_default>;
> - status = "okay";
> -};
> -
> -&dss_ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - /* VP2: DPI/HDMI Output */
> - port@1 {
> - reg = <1>;
> -
> - dpi1_out: endpoint {
> - remote-endpoint = <&sii9022_in>;
> - };
> - };
> -};
> -
> -&main_i2c1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_i2c1_pins_default>;
> - clock-frequency = <100000>;
> - status = "okay";
> -
> - audio_codec: audio-codec@18 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&audio_ext_refclk1_pins_default>;
> -
> - #sound-dai-cells = <0>;
> - compatible = "ti,tlv320aic3007";
> - reg = <0x18>;
> - ai3x-micbias-vg = <2>;
> -
> - AVDD-supply = <&vcc_3v3_sw>;
> - IOVDD-supply = <&vcc_3v3_sw>;
> - DRVDD-supply = <&vcc_3v3_sw>;
> - DVDD-supply = <&vcc_1v8>;
> - };
> -
> - gpio_exp: gpio-expander@21 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&gpio_exp_int_pins_default>;
> - compatible = "nxp,pcf8574";
> - reg = <0x21>;
> - interrupt-parent = <&main_gpio1>;
> - interrupts = <49 0>;
> - #gpio-cells = <2>;
> - gpio-controller;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - gpio-line-names = "", "GPIO1_CAN0_nEN",
> - "GPIO2_LED2", "GPIO3_LVDS_GPIO",
> - "GPIO4_BUT2", "GPIO5_LVDS_BKLT_EN",
> - "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
> - };
> -
> - usb-pd@22 {
> - compatible = "ti,tps6598x";
> - reg = <0x22>;
> -
> - connector {
> - compatible = "usb-c-connector";
> - label = "USB-C";
> - self-powered;
> - data-role = "dual";
> - power-role = "sink";
> - port {
> - usb_con_hs: endpoint {
> - remote-endpoint = <&typec_hs>;
> - };
> - };
> - };
> - };
> -
> - sii9022: bridge-hdmi@39 {
> - compatible = "sil,sii9022";
> - reg = <0x39>;
> -
> - interrupt-parent = <&main_gpio0>;
> - interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&hdmi_int_pins_default>;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> -
> - sii9022_in: endpoint {
> - remote-endpoint = <&dpi1_out>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> -
> - sii9022_out: endpoint {
> - remote-endpoint = <&hdmi_connector_in>;
> - };
> - };
> - };
> - };
> -
> - eeprom@51 {
> - compatible = "atmel,24c02";
> - pagesize = <16>;
> - reg = <0x51>;
> - };
> -};
> -
> -&main_mcan0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mcan0_pins_default>;
> - phys = <&can_tc1>;
> - status = "okay";
> -};
> -
> -&main_uart0 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_uart0_pins_default>;
> - status = "okay";
> -};
> -
> -&main_uart1 {
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_uart1_pins_default>;
> - /* Main UART1 may be used by TIFS firmware */
> - status = "okay";
> -};
> -
> -&mcasp2 {
> - #sound-dai-cells = <0>;
> -
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mcasp2_pins_default>;
> -
> - /* MCASP_IIS_MODE */
> - op-mode = <0>;
> - tdm-slots = <2>;
> -
> - /* 0: INACTIVE, 1: TX, 2: RX */
> - serial-dir = <
> - 0 0 1 2
> - 0 0 0 0
> - 0 0 0 0
> - 0 0 0 0
> - >;
> - tx-num-evt = <32>;
> - rx-num-evt = <32>;
> - status = "okay";
> -};
> -
> -&sdhci1 {
> - vmmc-supply = <&vcc_3v3_mmc>;
> - vqmmc-supply = <&vddshv5_sdio>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_mmc1_pins_default>;
> - disable-wp;
> - no-1-8-v;
> - status = "okay";
> -};
> -
> -&usbss0 {
> - ti,vbus-divider;
> - status = "okay";
> -};
> -
> -&usbss1 {
> - ti,vbus-divider;
> - status = "okay";
> -};
> -
> -&usb0 {
> - usb-role-switch;
> -
> - port {
> - typec_hs: endpoint {
> - remote-endpoint = <&usb_con_hs>;
> - };
> - };
> -};
> -
> -&usb1 {
> - dr_mode = "host";
> - pinctrl-names = "default";
> - pinctrl-0 = <&main_usb1_pins_default>;
> -};
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
> + * Author: Wadim Egorov <w.egorov@...tec.de>
> + *
> + * Product homepage:
> + * https://www.phytec.com/product/phyboard-am62x
> + */
> +
> +#include "k3-am625.dtsi"
> +#include "k3-am62-phycore-som.dtsi"
> +#include "k3-am62x-phyboard-lyra.dtsi"
> +
> +/ {
> + compatible = "phytec,am625-phyboard-lyra-rdk",
> + "phytec,am62-phycore-som", "ti,am625";
> + model = "PHYTEC phyBOARD-Lyra AM625";
> +};
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
> similarity index 97%
> copy from arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> copy to arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
> index 50d2573c840e..e4633af87eb9 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62x-phyboard-lyra.dtsi
> @@ -3,22 +3,14 @@
> * Copyright (C) 2022-2024 PHYTEC Messtechnik GmbH
> * Author: Wadim Egorov <w.egorov@...tec.de>
> *
> - * Product homepage:
> - * https://www.phytec.com/product/phyboard-am62x
> */
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/net/ti-dp83867.h>
> -#include "k3-am625.dtsi"
> -#include "k3-am62-phycore-som.dtsi"
>
> / {
> - compatible = "phytec,am625-phyboard-lyra-rdk",
> - "phytec,am62-phycore-som", "ti,am625";
> - model = "PHYTEC phyBOARD-Lyra AM625";
> -
> aliases {
> serial2 = &main_uart0;
> serial3 = &main_uart1;
> --
> 2.25.1
>
Powered by blists - more mailing lists