[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <726f2ed3-675f-45e8-94f0-d392181e7f92@collabora.com>
Date: Thu, 27 Jun 2024 12:10:17 +0200
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
To: Frank Wunderlich <frank-w@...lic-files.de>,
Matthias Brugger <matthias.bgg@...il.com>, Rob Herring <robh@...nel.org>
Cc: Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org,
devicetree@...r.kernel.org, Daniel Golle <daniel@...rotopia.org>,
Rob Herring <robh+dt@...nel.org>, Frank Wunderlich <linux@...web.de>
Subject: Re: Aw: [PATCH v3 1/2] arm64: dts: mt7986: add dtbs with applied
overlays for bpi-r3
Il 26/06/24 22:45, Frank Wunderlich ha scritto:
> any suggestions? hoping it does no laying around so long as v2
>
So you're trying to just test that the overlay is valid and can actually be
overlaid to the base dts?
I'm not sure that this is the right/best way... and I honestly have no time
to check that *exactly right now*, even though that should be.
I have to be convinced of what I'm doing before applying patches, and I know
that this was sent a bit of time ago, but I really didn't have any time to
dig into that... let's see if for some miracle I can do that for this cycle
otherwise it's going to be the next one.
I mean no disrespect to Rob who suggested this change, but I still want to
check that on my own before picking it.
Sorry about the delays
Cheers,
Angelo
> regards Frank
>
>
>> Gesendet: Samstag, 08. Juni 2024 um 10:05 Uhr
>> Von: "Frank Wunderlich" <linux@...web.de>
>> An: "Matthias Brugger" <matthias.bgg@...il.com>, "AngeloGioacchino Del Regno" <angelogioacchino.delregno@...labora.com>, "Rob Herring" <robh@...nel.org>, "Krzysztof Kozlowski" <krzk+dt@...nel.org>, "Conor Dooley" <conor+dt@...nel.org>
>> Cc: "Frank Wunderlich" <frank-w@...lic-files.de>, linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, linux-mediatek@...ts.infradead.org, devicetree@...r.kernel.org, "Daniel Golle" <daniel@...rotopia.org>, "Rob Herring" <robh+dt@...nel.org>
>> Betreff: [PATCH v3 1/2] arm64: dts: mt7986: add dtbs with applied overlays for bpi-r3
>>
>> From: Frank Wunderlich <frank-w@...lic-files.de>
>>
>> Build devicetree binaries for testing overlays and providing users
>> full dtb without using overlays.
>>
>> Suggested-by: Rob Herring <robh+dt@...nel.org>
>> Signed-off-by: Frank Wunderlich <frank-w@...lic-files.de>
>> ---
>> https://lore.kernel.org/all/CAL_JsqK_3xxD0DFwipXO85P=q=EYjUdjE1_8g1MKtvw3vVzx5A@mail.gmail.com/
>> https://lore.kernel.org/all/CAL_JsqJSi=kJSix=f3787ULZnaCy_Y26Phdhy5y9fat_vkDuUw@mail.gmail.com/
>>
>> v2:
>> make full dtbs multiline for better readability
>> ---
>> arch/arm64/boot/dts/mediatek/Makefile | 21 +++++++++++++++++++++
>> 1 file changed, 21 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>> index 37b4ca3a87c9..0ec5b904d35d 100644
>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>> @@ -15,6 +15,27 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
>> +mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := \
>> + mt7986a-bananapi-bpi-r3.dtb \
>> + mt7986a-bananapi-bpi-r3-emmc.dtbo \
>> + mt7986a-bananapi-bpi-r3-nand.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb
>> +mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := \
>> + mt7986a-bananapi-bpi-r3.dtb \
>> + mt7986a-bananapi-bpi-r3-emmc.dtbo \
>> + mt7986a-bananapi-bpi-r3-nor.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb
>> +mt7986a-bananapi-bpi-r3-sd-nand-dtbs := \
>> + mt7986a-bananapi-bpi-r3.dtb \
>> + mt7986a-bananapi-bpi-r3-sd.dtbo \
>> + mt7986a-bananapi-bpi-r3-nand.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb
>> +mt7986a-bananapi-bpi-r3-sd-nor-dtbs := \
>> + mt7986a-bananapi-bpi-r3.dtb \
>> + mt7986a-bananapi-bpi-r3-sd.dtbo \
>> + mt7986a-bananapi-bpi-r3-nor.dtbo
>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb
>> +
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7988a-bananapi-bpi-r4.dtb
>> --
>> 2.34.1
>>
>>
Powered by blists - more mailing lists