lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240627113948.25358-3-brgl@bgdev.pl>
Date: Thu, 27 Jun 2024 13:39:47 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Vinod Koul <vkoul@...nel.org>,
	Alexandre Torgue <alexandre.torgue@...s.st.com>,
	Jose Abreu <joabreu@...opsys.com>,
	"David S . Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>,
	Maxime Coquelin <mcoquelin.stm32@...il.com>
Cc: netdev@...r.kernel.org,
	linux-arm-msm@...r.kernel.org,
	linux-stm32@...md-mailman.stormreply.com,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH v2 net-next 2/2] net: stmmac: qcom-ethqos: add a DMA-reset quirk for sa8775p-ride

From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>

On sa8775p-ride the RX clocks from the AQR115C PHY are not available at
the time of the DMA reset so we need to loop TX clocks to RX and then
disable loopback after link-up. Use the existing callbacks to do it just
for this board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
 .../stmicro/stmmac/dwmac-qcom-ethqos.c        | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 91fe57a3e59e..f4d72d75e8de 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -21,6 +21,7 @@
 #define RGMII_IO_MACRO_CONFIG2		0x1C
 #define RGMII_IO_MACRO_DEBUG1		0x20
 #define EMAC_SYSTEM_LOW_POWER_DEBUG	0x28
+#define EMAC_WRAPPER_SGMII_PHY_CNTRL1	0xf4
 
 /* RGMII_IO_MACRO_CONFIG fields */
 #define RGMII_CONFIG_FUNC_CLK_EN		BIT(30)
@@ -79,6 +80,9 @@
 #define ETHQOS_MAC_CTRL_SPEED_MODE		BIT(14)
 #define ETHQOS_MAC_CTRL_PORT_SEL		BIT(15)
 
+/* EMAC_WRAPPER_SGMII_PHY_CNTRL1 bits */
+#define SGMII_PHY_CNTRL1_SGMII_TX_TO_RX_LOOPBACK_EN	BIT(3)
+
 #define SGMII_10M_RX_CLK_DVDR			0x31
 
 struct ethqos_emac_por {
@@ -95,6 +99,7 @@ struct ethqos_emac_driver_data {
 	bool has_integrated_pcs;
 	u32 dma_addr_width;
 	struct dwmac4_addrs dwmac4_addrs;
+	bool needs_sgmii_loopback;
 };
 
 struct qcom_ethqos {
@@ -114,6 +119,7 @@ struct qcom_ethqos {
 	unsigned int num_por;
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
+	bool needs_sgmii_loopback;
 };
 
 static int rgmii_readl(struct qcom_ethqos *ethqos, unsigned int offset)
@@ -191,8 +197,21 @@ ethqos_update_link_clk(struct qcom_ethqos *ethqos, unsigned int speed)
 	clk_set_rate(ethqos->link_clk, ethqos->link_clk_rate);
 }
 
+static void
+qcom_ethqos_set_sgmii_loopback(struct qcom_ethqos *ethqos, bool enable)
+{
+	if (!ethqos->needs_sgmii_loopback)
+		return;
+
+	rgmii_updatel(ethqos,
+		      SGMII_PHY_CNTRL1_SGMII_TX_TO_RX_LOOPBACK_EN,
+		      enable ? SGMII_PHY_CNTRL1_SGMII_TX_TO_RX_LOOPBACK_EN : 0,
+		      EMAC_WRAPPER_SGMII_PHY_CNTRL1);
+}
+
 static void ethqos_set_func_clk_en(struct qcom_ethqos *ethqos)
 {
+	qcom_ethqos_set_sgmii_loopback(ethqos, true);
 	rgmii_updatel(ethqos, RGMII_CONFIG_FUNC_CLK_EN,
 		      RGMII_CONFIG_FUNC_CLK_EN, RGMII_IO_MACRO_CONFIG);
 }
@@ -277,6 +296,7 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	.has_emac_ge_3 = true,
 	.link_clk_name = "phyaux",
 	.has_integrated_pcs = true,
+	.needs_sgmii_loopback = true,
 	.dma_addr_width = 36,
 	.dwmac4_addrs = {
 		.dma_chan = 0x00008100,
@@ -682,6 +702,7 @@ static void ethqos_fix_mac_speed(void *priv, unsigned int speed, unsigned int mo
 {
 	struct qcom_ethqos *ethqos = priv;
 
+	qcom_ethqos_set_sgmii_loopback(ethqos, false);
 	ethqos->speed = speed;
 	ethqos_update_link_clk(ethqos, speed);
 	ethqos_configure(ethqos);
@@ -820,6 +841,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->num_por = data->num_por;
 	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
 	ethqos->has_emac_ge_3 = data->has_emac_ge_3;
+	ethqos->needs_sgmii_loopback = data->needs_sgmii_loopback;
 
 	ethqos->link_clk = devm_clk_get(dev, data->link_clk_name ?: "rgmii");
 	if (IS_ERR(ethqos->link_clk))
-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ