[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240627-k1-01-basic-dt-v2-0-cc06c7555f07@gentoo.org>
Date: Thu, 27 Jun 2024 15:31:14 +0000
From: Yixun Lan <dlan@...too.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Conor Dooley <conor@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Samuel Holland <samuel.holland@...ive.com>,
Anup Patel <anup@...infault.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>, Lubomir Rintel <lkundrak@...sk>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Palmer Dabbelt <palmer@...ive.com>, linux-riscv@...ts.infradead.org,
linux-serial@...r.kernel.org, Inochi Amaoto <inochiama@...look.com>,
Meng Zhang <zhangmeng.kevin@...cemit.com>, Yangyu Chen <cyy@...self.name>,
Yixun Lan <dlan@...too.org>
Subject: [PATCH v2 00/10] riscv: add initial support for SpacemiT K1
SpacemiT K1 is an ideal chip for some new extension such as RISC-V Vector
1.0 and Zicond evaluation now. Add initial support for it to allow more
people to participate in building drivers to mainline for it.
This kernel has been tested upon Banana Pi BPI-F3 board on vendor U-Boot
bootflow generated by Armbian SDK[1] and patched OpenSBI[2] to enable
Zicboz, which does not in the vendor dts on its U-Boot. Then successfully
booted to busybox on initrd with this log[3].
As previous discussion in patch v1[4], maintainer expect more basic drivers
ready before really merging it, which would be fine. For other follow-up patches,
that are clk, pinctrl/gpio, reset.. My current goal would target at a headless
system including SD card, emmc, and ethernet.
P.S: talked to Yangyu, I will help and take care of this patch series, thanks
---
Changes in v2:
- fix timebase-frequency according to current setting
- add other uart dt nodes, fix input frequency
- introduce new uart compatible for K1 SoC
- add 'k1' prefix to bananapi-f3.dts
- fix k1-clint compatible
- fix some typos
- Link to v1: https://lore.kernel.org/r/tencent_BC64B7B1876F5D10479BD19112F73F262505@qq.com
Link: https://github.com/BPI-SINOVOIP/armbian-build/tree/v24.04.30 [1]
Link: https://gist.github.com/cyyself/a07096e6e99c949ed13f8fa16d884402 [2]
Link: https://gist.github.com/cyyself/a2201c01f5c8955a119641f97b7d0280 [3]
Link: https://lore.kernel.org/r/20240618-hardwood-footrest-ab5ec5bce3cf@wendy [4]
To: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <krzk+dt@...nel.org>
To: Conor Dooley <conor+dt@...nel.org>
To: Conor Dooley <conor@...nel.org>
To: Paul Walmsley <paul.walmsley@...ive.com>
To: Palmer Dabbelt <palmer@...belt.com>
To: Albert Ou <aou@...s.berkeley.edu>
To: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Thomas Gleixner <tglx@...utronix.de>
To: Samuel Holland <samuel.holland@...ive.com>
To: Anup Patel <anup@...infault.org>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: Jiri Slaby <jirislaby@...nel.org>
To: Lubomir Rintel <lkundrak@...sk>
Cc: devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Cc: Palmer Dabbelt <palmer@...ive.com>
Cc: linux-riscv@...ts.infradead.org
Cc: linux-serial@...r.kernel.org
Cc: Inochi Amaoto <inochiama@...look.com>
Cc: Meng Zhang <zhangmeng.kevin@...cemit.com>
Signed-off-by: Yangyu Chen <cyy@...self.name>
Signed-off-by: Yixun Lan <dlan@...too.org>
---
Yangyu Chen (9):
dt-bindings: vendor-prefixes: add spacemit
dt-bindings: riscv: Add SpacemiT X60 compatibles
dt-bindings: riscv: add SpacemiT K1 bindings
dt-bindings: timer: Add SpacemiT K1 CLINT
dt-bindings: interrupt-controller: Add SpacemiT K1 PLIC
riscv: add SpacemiT SOC family Kconfig support
riscv: dts: add initial SpacemiT K1 SoC device tree
riscv: dts: spacemit: add Banana Pi BPI-F3 board device tree
riscv: defconfig: enable SpacemiT SoC
Yixun Lan (1):
dt-bindings: serial: 8250: Add SpacemiT K1 uart compatible
.../interrupt-controller/sifive,plic-1.0.0.yaml | 5 +-
Documentation/devicetree/bindings/riscv/cpus.yaml | 1 +
.../devicetree/bindings/riscv/spacemit.yaml | 24 ++
Documentation/devicetree/bindings/serial/8250.yaml | 4 +-
.../devicetree/bindings/timer/sifive,clint.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/riscv/Kconfig.socs | 5 +
arch/riscv/boot/dts/Makefile | 1 +
arch/riscv/boot/dts/spacemit/Makefile | 2 +
arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 19 ++
arch/riscv/boot/dts/spacemit/k1.dtsi | 378 +++++++++++++++++++++
arch/riscv/configs/defconfig | 1 +
12 files changed, 441 insertions(+), 2 deletions(-)
---
base-commit: f2661062f16b2de5d7b6a5c42a9a5c96326b8454
change-id: 20240626-k1-01-basic-dt-1aa31eeebcd2
Best regards,
--
Yixun Lan <dlan@...too.org>
Powered by blists - more mailing lists