linux-kernel - Re: [PATCH v2] clk: qcom: gcc-x1e80100: Fix halt

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Date: Fri, 28 Jun 2024 14:23:21 +0530
From: Taniya Das <quic_tdas@...cinc.com>
To: Abel Vesa <abel.vesa@...aro.org>, Bjorn Andersson <andersson@...nel.org>,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Rajendra Nayak <quic_rjendra@...cinc.com>,
        Bryan O'Donoghue
	<bryan.odonoghue@...aro.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>
CC: Johan Hovold <johan@...nel.org>, Sibi Sankar <quic_sibis@...cinc.com>,
        <linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] clk: qcom: gcc-x1e80100: Fix halt_check for all pipe
 clocks



On 6/28/2024 1:38 PM, Abel Vesa wrote:
> In case of all pipe clocks, there is a QMP PHY clock that is feeding them.
> If, for whatever reason, the clock from the PHY is not enabled, halt bit
> will not get set, and the clock controller driver will assume the clock
> is stuck in a specific state. The way this is supposed to be properly
> fixed is to defer the checking of the halt bit until after the PHY clock
> has been initialized, but doing so complicates the clock controller
> driver. In fact, since these pipe clocks are consumed by the PHY, while
> the PHY is also the one providing the source, if clock gets stuck, the PHY
> driver would be to blame. So instead of checking the halt bit in here,
> just skip it and assume the PHY driver is handling the source clock
> correctly.
> 
> Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100")
> Signed-off-by: Abel Vesa<abel.vesa@...aro.org>
> ---
> Changes in v2:
> - Re-worded the commit message from scratch.
> - Changed all pipe clocks halt_check to skip.
> - Link to v1:https://lore.kernel.org/r/20240530-x1e80100-clk-gcc-fix-halt-check-for-usb-phy-pipe-clks-v1-1-16c6f4dccbd5@linaro.org
> ---
>   drivers/clk/qcom/gcc-x1e80100.c | 44 ++++++++++++++++++++---------------------
>   1 file changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/clk/qcom/gcc-x1e80100.c b/drivers/clk/qcom/gcc-x1e80100.c
> index eb7e36ebd7ae..fc80011342da 100644
> --- a/drivers/clk/qcom/gcc-x1e80100.c
> +++ b/drivers/clk/qcom/gcc-x1e80100.c

Reviewed-by: Taniya Das <quic_tdas@...cinc.com>

-- 
Thanks & Regards,
Taniya Das.