linux-kernel - [PATCH v13 6/6] iommu/arm-smmu: add support for PRR bit setup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240628140435.1652374-7-quic_bibekkum@quicinc.com>
Date: Fri, 28 Jun 2024 19:34:35 +0530
From: Bibek Kumar Patro <quic_bibekkum@...cinc.com>
To: <robdclark@...il.com>, <will@...nel.org>, <robin.murphy@....com>,
        <joro@...tes.org>, <jgg@...pe.ca>, <jsnitsel@...hat.com>,
        <robh@...nel.org>, <krzysztof.kozlowski@...aro.org>,
        <quic_c_gdjako@...cinc.com>, <dmitry.baryshkov@...aro.org>,
        <konrad.dybcio@...aro.org>
CC: <iommu@...ts.linux.dev>, <linux-arm-msm@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        "Bibek Kumar Patro" <quic_bibekkum@...cinc.com>
Subject: [PATCH v13 6/6] iommu/arm-smmu: add support for PRR bit setup

Add an adreno-smmu-priv interface for drm/msm to call
into arm-smmu-qcom and initiate the PRR bit setup or reset
sequence as per request.

This will be used by GPU to setup the PRR bit and related
configuration registers through adreno-smmu private
interface instead of directly poking the smmu hardware.

Suggested-by: Rob Clark <robdclark@...il.com>
Signed-off-by: Bibek Kumar Patro <quic_bibekkum@...cinc.com>
---
 drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 23 ++++++++++++++++++++++
 drivers/iommu/arm/arm-smmu/arm-smmu.h      |  2 ++
 include/linux/adreno-smmu-priv.h           |  6 +++++-
 3 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
index bd101a161d04..64571a1c47b8 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c
@@ -28,6 +28,7 @@
 #define PREFETCH_SHALLOW	(1 << PREFETCH_SHIFT)
 #define PREFETCH_MODERATE	(2 << PREFETCH_SHIFT)
 #define PREFETCH_DEEP		(3 << PREFETCH_SHIFT)
+#define GFX_ACTLR_PRR		(1 << 5)

 static const struct actlr_config sc7280_apps_actlr_cfg[] = {
 	{ 0x0800, 0x04e0, PREFETCH_DEFAULT | CMTLB },
@@ -235,6 +236,27 @@ static void qcom_adreno_smmu_resume_translation(const void *cookie, bool termina
 	arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_RESUME, reg);
 }

+static void qcom_adreno_smmu_set_prr(const void *cookie, phys_addr_t page_addr, bool set)
+{
+	struct arm_smmu_domain *smmu_domain = (void *)cookie;
+	struct arm_smmu_cfg *cfg = &smmu_domain->cfg;
+	struct arm_smmu_device *smmu = smmu_domain->smmu;
+	u32 reg = 0;
+
+	writel_relaxed(lower_32_bits(page_addr),
+				smmu->base + ARM_SMMU_GFX_PRR_CFG_LADDR);
+
+	writel_relaxed(upper_32_bits(page_addr),
+				smmu->base + ARM_SMMU_GFX_PRR_CFG_UADDR);
+
+	reg =  arm_smmu_cb_read(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR);
+	reg &= ~GFX_ACTLR_PRR;
+	if (set)
+		reg |= FIELD_PREP(GFX_ACTLR_PRR, 1);
+	arm_smmu_cb_write(smmu, cfg->cbndx, ARM_SMMU_CB_ACTLR, reg);
+
+}
+
 #define QCOM_ADRENO_SMMU_GPU_SID 0

 static bool qcom_adreno_smmu_is_gpu_device(struct device *dev)
@@ -407,6 +429,7 @@ static int qcom_adreno_smmu_init_context(struct arm_smmu_domain *smmu_domain,
 	priv->get_fault_info = qcom_adreno_smmu_get_fault_info;
 	priv->set_stall = qcom_adreno_smmu_set_stall;
 	priv->resume_translation = qcom_adreno_smmu_resume_translation;
+	priv->set_prr = qcom_adreno_smmu_set_prr;

 	actlrvar = qsmmu->data->actlrvar;
 	if (!actlrvar)
diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu.h b/drivers/iommu/arm/arm-smmu/arm-smmu.h
index d9c2ef8c1653..3076bef49e20 100644
--- a/drivers/iommu/arm/arm-smmu/arm-smmu.h
+++ b/drivers/iommu/arm/arm-smmu/arm-smmu.h
@@ -154,6 +154,8 @@ enum arm_smmu_cbar_type {
 #define ARM_SMMU_SCTLR_M		BIT(0)

 #define ARM_SMMU_CB_ACTLR		0x4
+#define ARM_SMMU_GFX_PRR_CFG_LADDR	0x6008
+#define ARM_SMMU_GFX_PRR_CFG_UADDR	0x600C

 #define ARM_SMMU_CB_RESUME		0x8
 #define ARM_SMMU_RESUME_TERMINATE	BIT(0)
diff --git a/include/linux/adreno-smmu-priv.h b/include/linux/adreno-smmu-priv.h
index c637e0997f6d..d6e2ca9f8d8c 100644
--- a/include/linux/adreno-smmu-priv.h
+++ b/include/linux/adreno-smmu-priv.h
@@ -49,7 +49,10 @@ struct adreno_smmu_fault_info {
  *                 before set_ttbr0_cfg().  If stalling on fault is enabled,
  *                 the GPU driver must call resume_translation()
  * @resume_translation: Resume translation after a fault
- *
+ * @set_prr:	   Extendible interface to be used by GPU to modify the
+ *		    ACTLR register bits, currently used to configure
+ *		    Partially-Resident-Region (PRR) feature's
+ *		    setup and reset sequence as requested.
  *
  * The GPU driver (drm/msm) and adreno-smmu work together for controlling
  * the GPU's SMMU instance.  This is by necessity, as the GPU is directly
@@ -67,6 +70,7 @@ struct adreno_smmu_priv {
     void (*get_fault_info)(const void *cookie, struct adreno_smmu_fault_info *info);
     void (*set_stall)(const void *cookie, bool enabled);
     void (*resume_translation)(const void *cookie, bool terminate);
+    void (*set_prr)(const void *cookie, phys_addr_t page_addr, bool set);
 };

 #endif /* __ADRENO_SMMU_PRIV_H */
--
2.34.1