linux-kernel - [PATCH] PCI/PM: Avoid D3cold for HP Spectre x360 Convertible 15-ch0xx PCIe Ports

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240629001743.1573581-1-superm1@kernel.org>
Date: Fri, 28 Jun 2024 19:17:43 -0500
From: superm1@...nel.org
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: linux-pci@...r.kernel.org (open list:PCI SUBSYSTEM),
	linux-kernel@...r.kernel.org (open list),
	Mario Limonciello <mario.limonciello@....com>,
	Tony Murray <murraytony@...il.com>
Subject: [PATCH] PCI/PM: Avoid D3cold for HP Spectre x360 Convertible 15-ch0xx PCIe Ports

From: Mario Limonciello <mario.limonciello@....com>

HP Spectre x360 Convertible 15-ch0xx is an Intel Kaby Lake-G system that
contains an AMD Polaris Radeon dGPU.
Attempting to use the dGPU fails with the following sequence:

  amdgpu 0000:01:00.0: not ready 1023ms after resume; waiting
  amdgpu 0000:01:00.0: not ready 2047ms after resume; waiting
  amdgpu 0000:01:00.0: not ready 4095ms after resume; waiting
  amdgpu 0000:01:00.0: not ready 8191ms after resume; waiting
  amdgpu 0000:01:00.0: not ready 16383ms after resume; waiting
  amdgpu 0000:01:00.0: not ready 32767ms after resume; waiting
  amdgpu 0000:01:00.0: not ready 65535ms after resume; giving up
  amdgpu 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
  [drm:atom_op_jump [amdgpu]] *ERROR* atombios stuck in loop for more than 20secs aborting

The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.

The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe, but this system appears not to
work properly.

Add the system to bridge_d3_blacklist to prevent D3cold from being used.

Reported-and-tested-by: Tony Murray <murraytony@...il.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3389
Signed-off-by: Mario Limonciello <mario.limonciello@....com>
---
 drivers/pci/pci.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 35fb1f17a589..65e3a550052f 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2965,6 +2965,17 @@ static const struct dmi_system_id bridge_d3_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_VERSION, "95.33"),
 		},
 	},
+	{
+		/*
+		 * Changing power state of root port dGPU is connected fails
+		 * https://gitlab.freedesktop.org/drm/amd/-/issues/3229
+		 */
+		.ident = "HP Spectre x360 Convertible 15-ch0xx",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
+			DMI_MATCH(DMI_BOARD_NAME, "83BB"),
+		},
+	},
 #endif
 	{ }
 };
-- 
2.43.0