| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240630132859.2885-3-raymondhackley@protonmail.com>
Date: Sun, 30 Jun 2024 13:29:41 +0000
From: Raymond Hackley <raymondhackley@...tonmail.com>
To: linux-kernel@...r.kernel.org
Cc: Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, phone-devel@...r.kernel.org, ~postmarketos/upstreaming@...ts.sr.ht, Luca Weiss <luca@...aweiss.eu>
Subject: [PATCH v3 2/2] ARM: dts: qcom-msm8226-samsung-ms013g: Add initial device tree
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the
other Samsung devices based on MSM8226 with only a few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- UART (on USB connector via the TI TSU6721 MUIC)
- Regulators
- Touchscreen
- Accelerometer
Signed-off-by: Raymond Hackley <raymondhackley@...tonmail.com>
Reviewed-by: Luca Weiss <luca@...aweiss.eu>
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/qcom-msm8226-samsung-ms013g.dts | 386 ++++++++++++++++++
2 files changed, 387 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index ccd4ce6353df..f06c6d425e91 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8226-microsoft-dempsey.dtb \
qcom-msm8226-microsoft-makepeace.dtb \
qcom-msm8226-microsoft-moneypenny.dtb \
+ qcom-msm8226-samsung-ms013g.dtb \
qcom-msm8226-samsung-s3ve3g.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8916-samsung-e5.dtb \
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
new file mode 100644
index 000000000000..2ecc5983d365
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "qcom-msm8226.dtsi"
+#include "pm8226.dtsi"
+
+/delete-node/ &smem_region;
+
+/ {
+ model = "Samsung Galaxy Grand 2";
+ compatible = "samsung,ms013g", "qcom,msm8226";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ serial0 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Hall Effect Sensor";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume Up";
+ gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ button-volume-down {
+ label = "Volume Down";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ button-home {
+ label = "Home Key";
+ gpios = <&tlmm 108 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ };
+ };
+
+ reg_motor_vdd: regulator-motor-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "motor_vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&motor_en_default>;
+ pinctrl-names = "default";
+ };
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
+ compatible = "regulator-fixed";
+ regulator-name = "tsp_3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&tsp_en_default>;
+ pinctrl-names = "default";
+ };
+
+ reserved-memory {
+ smem_region: smem@...0000 {
+ reg = <0x0fa00000 0x100000>;
+ no-map;
+ };
+ };
+
+ vibrator {
+ compatible = "regulator-haptic";
+ haptic-supply = <®_motor_vdd>;
+ min-microvolt = <3300000>;
+ max-microvolt = <3300000>;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ accelerometer@18 {
+ compatible = "bosch,bma255";
+ reg = <0x18>;
+ interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>;
+
+ vdd-supply = <&pm8226_l19>;
+ vddio-supply = <&pm8226_lvs1>;
+
+ pinctrl-0 = <&accel_int_default>;
+ pinctrl-names = "default";
+
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+ };
+};
+
+&blsp1_i2c5 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "zinitix,bt541";
+
+ reg = <0x20>;
+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <720>;
+ touchscreen-size-y = <1280>;
+
+ vcca-supply = <®_vdd_tsp_a>;
+ vdd-supply = <&pm8226_lvs1>;
+
+ pinctrl-0 = <&tsp_int_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8226-regulators";
+
+ pm8226_s3: s3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2200000>;
+ };
+
+ pm8226_s5: s5 {
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ pm8226_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8226_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l3: l3 {
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1337500>;
+ };
+
+ pm8226_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l5: l5 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8226_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8226_l7: l7 {
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+ };
+
+ pm8226_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l9: l9 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8226_l14: l14 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
+ };
+
+ pm8226_l15: l15 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8226_l16: l16 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8226_l17: l17 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ pm8226_l18: l18 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8226_l20: l20 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pm8226_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ pm8226_l22: l22 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_l23: l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8226_l24: l24 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8226_l25: l25 {
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <2125000>;
+ };
+
+ pm8226_l26: l26 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8226_l27: l27 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8226_l28: l28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8226_lvs1: lvs1 {};
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8226_l17>;
+ vqmmc-supply = <&pm8226_l6>;
+
+ bus-width = <8>;
+ non-removable;
+
+ status = "okay";
+};
+
+&sdhc_2 {
+ vmmc-supply = <&pm8226_l18>;
+ vqmmc-supply = <&pm8226_l21>;
+
+ bus-width = <4>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+
+ pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&tlmm {
+ accel_int_default: accel-int-default-state {
+ pins = "gpio64";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio50";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio106", "gpio107", "gpio108";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ motor_en_default: motor-en-default-state {
+ pins = "gpio111";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_cd_default: sdhc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_en_default: tsp-en-default-state {
+ pins = "gpio31";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tsp_int_default: tsp-int-default-state {
+ pins = "gpio17";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
--
2.39.2
Powered by blists - more mailing lists