linux-kernel - [PATCH v2 4/9] arm64: dts: rockchip: remove unused usb2 nodes for Lunzn Fastrhino R6xS

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240630150010.55729-5-amadeus@jmu.edu.cn>
Date: Sun, 30 Jun 2024 23:00:05 +0800
From: Chukun Pan <amadeus@....edu.cn>
To: Heiko Stuebner <heiko@...ech.de>
Cc: Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Rob Herring <robh@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org,
	Chukun Pan <amadeus@....edu.cn>
Subject: [PATCH v2 4/9] arm64: dts: rockchip: remove unused usb2 nodes for Lunzn Fastrhino R6xS

Fix the following error when booting:
[   15.851853] platform fd800000.usb: deferred probe pending
[   15.852384] platform fd840000.usb: deferred probe pending
[   15.852881] platform fd880000.usb: deferred probe pending

This is due to usb2phy1 is not enabled. There is no USB 2.0
port on the board, just remove it.

Fixes: c79dab407afd ("arm64: dts: rockchip: Add Lunzn Fastrhino R66S")
Signed-off-by: Chukun Pan <amadeus@....edu.cn>
---
 .../boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
index 82577eba31eb..e08c9eab6f17 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r66s.dtsi
@@ -421,28 +421,12 @@ &uart2 {
 	status = "okay";
 };
 
-&usb_host0_ehci {
-	status = "okay";
-};
-
-&usb_host0_ohci {
-	status = "okay";
-};
-
 &usb_host0_xhci {
 	dr_mode = "host";
 	extcon = <&usb2phy0>;
 	status = "okay";
 };
 
-&usb_host1_ehci {
-	status = "okay";
-};
-
-&usb_host1_ohci {
-	status = "okay";
-};
-
 &usb_host1_xhci {
 	status = "okay";
 };
-- 
2.25.1