[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240630165103.GE5264@thinkpad>
Date: Sun, 30 Jun 2024 22:21:03 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Frank Li <Frank.Li@....com>
Cc: Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, linux-pci@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, bpf@...r.kernel.org,
devicetree@...r.kernel.org
Subject: Re: [PATCH v6 10/10] PCI: imx6: Add i.MX8Q PCIe root complex (RC)
support
On Mon, Jun 17, 2024 at 04:16:46PM -0400, Frank Li wrote:
> From: Richard Zhu <hongxing.zhu@....com>
>
> Implement i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe RC support. While
> the controller resembles that of iMX8MP, the PHY differs significantly.
> Notably, there's a distinction between PCI bus addresses and CPU addresses.
Do we know the reason?
>
> Introduce IMX_PCIE_FLAG_CPU_ADDR_FIXUP in drvdata::flags to indicate driver
> need the cpu_addr_fixup() callback to facilitate CPU address to PCI bus
> address conversion according to "range" property.
'ranges'
>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 18c133f5a56fc..d2533d889d120 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -66,6 +66,7 @@ enum imx_pcie_variants {
> IMX8MQ,
> IMX8MM,
> IMX8MP,
> + IMX8Q,
> IMX95,
> IMX8MQ_EP,
> IMX8MM_EP,
> @@ -81,6 +82,7 @@ enum imx_pcie_variants {
> #define IMX_PCIE_FLAG_HAS_PHY_RESET BIT(5)
> #define IMX_PCIE_FLAG_HAS_SERDES BIT(6)
> #define IMX_PCIE_FLAG_SUPPORT_64BIT BIT(7)
> +#define IMX_PCIE_FLAG_CPU_ADDR_FIXUP BIT(8)
>
> #define imx_check_flag(pci, val) (pci->drvdata->flags & val)
>
> @@ -1012,6 +1014,22 @@ static void imx_pcie_host_exit(struct dw_pcie_rp *pp)
> regulator_disable(imx_pcie->vpcie);
> }
>
> +static u64 imx_pcie_cpu_addr_fixup(struct dw_pcie *pcie, u64 cpu_addr)
> +{
> + struct imx_pcie *imx_pcie = to_imx_pcie(pcie);
> + struct dw_pcie_rp *pp = &pcie->pp;
> + struct resource_entry *entry;
> + unsigned int offset;
> +
> + if (!(imx_pcie->drvdata->flags & IMX_PCIE_FLAG_CPU_ADDR_FIXUP))
> + return cpu_addr;
> +
> + entry = resource_list_first_type(&pp->bridge->windows, IORESOURCE_MEM);
> + offset = entry->offset;
> +
> + return (cpu_addr - offset);
> +}
> +
> static const struct dw_pcie_host_ops imx_pcie_host_ops = {
> .init = imx_pcie_host_init,
> .deinit = imx_pcie_host_exit,
> @@ -1020,6 +1038,7 @@ static const struct dw_pcie_host_ops imx_pcie_host_ops = {
> static const struct dw_pcie_ops dw_pcie_ops = {
> .start_link = imx_pcie_start_link,
> .stop_link = imx_pcie_stop_link,
> + .cpu_addr_fixup = imx_pcie_cpu_addr_fixup,
> };
>
> static void imx_pcie_ep_init(struct dw_pcie_ep *ep)
> @@ -1449,6 +1468,13 @@ static int imx_pcie_probe(struct platform_device *pdev)
> if (ret < 0)
> return ret;
>
> + if (imx_check_flag(imx_pcie, IMX_PCIE_FLAG_CPU_ADDR_FIXUP)) {
> + if (!resource_list_first_type(&pci->pp.bridge->windows, IORESOURCE_MEM)) {
> + dw_pcie_host_deinit(&pci->pp);
> + return dev_err_probe(dev, -EINVAL, "DTS Miss PCI memory range");
-ENODEV
- Mani
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists