lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240701200728.1887467-2-Frank.Li@nxp.com>
Date: Mon,  1 Jul 2024 16:07:23 -0400
From: Frank Li <Frank.Li@....com>
To: Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Shawn Guo <shawnguo@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Fabio Estevam <festevam@...il.com>,
	devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
	imx@...ts.linux.dev (open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-arm-kernel@...ts.infradead.org (moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE),
	linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH v2 2/7] arm64: dts: imx95: add sai[1..6], xcvr and micfill

Add sai[1..6], NXP Audio Transceiver (XCVR) Controller and  MICFIL Digital
Audio Interface (MICFIL).

Reviewed-by: Peng Fan <peng.fan@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
Change from v1 to v2
- Add Peng Fan's review tag
---
 arch/arm64/boot/dts/freescale/imx95.dtsi | 111 +++++++++++++++++++++++
 1 file changed, 111 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 12f7ac52c2589..d32127cf7018a 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -222,6 +222,13 @@ core5 {
 		};
 	};
 
+	dummy: clock-dummy {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+		clock-output-names = "dummy";
+	};
+
 	clk_ext1: clock-ext1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -706,6 +713,64 @@ lpuart6: serial@...a0000 {
 				status = "disabled";
 			};
 
+			sai3: sai@...50000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI3>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai4: sai@...60000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI4>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 68 0 FSL_EDMA_RX>, <&edma2 67 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@...70000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x42670000 0x10000>;
+				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI5>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 70 0 FSL_EDMA_RX>, <&edma2 69 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			xcvr: xcvr@...80000 {
+				compatible = "fsl,imx95-xcvr";
+				reg = <0x42680000 0x800>, <0x42680800 0x400>,
+				      <0x42680c00 0x080>, <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = /* XCVR IRQ 0 */
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     /* XCVR IRQ 1 */
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSWAKEUP>,
+					 <&scmi_clk IMX95_CLK_SPDIF>,
+					 <&dummy>,
+					 <&scmi_clk IMX95_CLK_AUDIOXCVR>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 1>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
 			lpuart7: serial@...90000 {
 				compatible = "fsl,imx95-lpuart", "fsl,imx8ulp-lpuart",
 					     "fsl,imx7ulp-lpuart";
@@ -1124,6 +1189,38 @@ lpuart2: serial@...90000 {
 				status = "disabled";
 			};
 
+			sai1: sai@...b0000 {
+				compatible = "fsl,imx95-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>, <&dummy>,
+					 <&scmi_clk IMX95_CLK_SAI1>, <&dummy>,
+					 <&dummy>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 25 0 FSL_EDMA_RX>, <&edma1 24 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			micfil: micfil@...20000 {
+				compatible = "fsl,imx95-micfil", "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&scmi_clk IMX95_CLK_BUSAON>,
+					 <&scmi_clk IMX95_CLK_PDM>,
+					 <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+					 <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+					 <&dummy>;
+				clock-names = "ipg_clk", "ipg_clk_app",
+					      "pll8k", "pll11k", "clkext3";
+				dmas = <&edma1 6 0 5>;
+				dma-names = "rx";
+				status = "disabled";
+			};
+
 			adc1: adc@...30000 {
 				compatible = "nxp,imx93-adc";
 				reg = <0x44530000 0x10000>;
@@ -1423,5 +1520,19 @@ pcie1_ep: pcie-ep@...80000 {
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 			status = "disabled";
 		};
+
+		sai2: sai@...80000 {
+			compatible = "fsl,imx95-sai";
+			reg = <0x0 0x4c880000 0x0 0x10000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&scmi_clk IMX95_CLK_BUSNETCMIX>, <&dummy>,
+				 <&scmi_clk IMX95_CLK_SAI2>, <&dummy>,
+				 <&dummy>;
+			clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+			power-domains = <&scmi_devpd IMX95_PD_NETC>;
+			dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
 	};
 };
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ