linux-kernel - [PATCH v2 6/9] arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240630150010.55729-7-amadeus@jmu.edu.cn>
Date: Sun, 30 Jun 2024 23:00:07 +0800
From: Chukun Pan <amadeus@....edu.cn>
To: Heiko Stuebner <heiko@...ech.de>
Cc: Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Rob Herring <robh@...nel.org>,
	linux-arm-kernel@...ts.infradead.org,
	linux-rockchip@...ts.infradead.org,
	linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org,
	Chukun Pan <amadeus@....edu.cn>
Subject: [PATCH v2 6/9] arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S

Fixed the PHY address and reset GPIOs (does not match the corresponding
pinctrl) for gmac0 and gmac1.

Fixes: b9f8ca655d80 ("arm64: dts: rockchip: Add Lunzn Fastrhino R68S")
Signed-off-by: Chukun Pan <amadeus@....edu.cn>
---
 .../boot/dts/rockchip/rk3568-fastrhino-r68s.dts      | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
index a3339186e89c..ce2a5e1ccefc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-fastrhino-r68s.dts
@@ -39,7 +39,7 @@ &gmac0_tx_bus2
 		     &gmac0_rx_bus2
 		     &gmac0_rgmii_clk
 		     &gmac0_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -61,7 +61,7 @@ &gmac1m1_tx_bus2
 		     &gmac1m1_rx_bus2
 		     &gmac1m1_rgmii_clk
 		     &gmac1m1_rgmii_bus>;
-	snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 15ms, 50ms for rtl8211f */
 	snps,reset-delays-us = <0 15000 50000>;
@@ -71,18 +71,18 @@ &gmac1m1_rgmii_clk
 };
 
 &mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+	rgmii_phy0: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy0_reset_pin>;
 		pinctrl-names = "default";
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: ethernet-phy@0 {
+	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
+		reg = <0x1>;
 		pinctrl-0 = <&eth_phy1_reset_pin>;
 		pinctrl-names = "default";
 	};
-- 
2.25.1