[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAJM55Z9jeAQTsVjRiLeofDm1RyMWCuHXC0a-pdKtpUiTkSjJCA@mail.gmail.com>
Date: Mon, 1 Jul 2024 12:49:00 +0000
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Yixun Lan <dlan@...too.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Conor Dooley <conor@...nel.org>, Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
Daniel Lezcano <daniel.lezcano@...aro.org>, Thomas Gleixner <tglx@...utronix.de>,
Samuel Holland <samuel.holland@...ive.com>, Anup Patel <anup@...infault.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Jiri Slaby <jirislaby@...nel.org>,
Lubomir Rintel <lkundrak@...sk>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Palmer Dabbelt <palmer@...ive.com>, linux-riscv@...ts.infradead.org,
linux-serial@...r.kernel.org, Inochi Amaoto <inochiama@...look.com>,
Meng Zhang <zhangmeng.kevin@...cemit.com>, Yangyu Chen <cyy@...self.name>
Subject: Re: [PATCH v2 08/10] riscv: dts: add initial SpacemiT K1 SoC device tree
Yixun Lan wrote:
> From: Yangyu Chen <cyy@...self.name>
>
> Banana Pi BPI-F3 motherboard is powered by SpacemiT K1[1].
>
> Key features:
> - 4 cores per cluster, 2 clusters on chip
> - UART IP is Intel XScale UART
>
> Some key considerations:
> - ISA string is inferred from vendor documentation[2]
> - Cluster topology is inferred from datasheet[1] and L2 in vendor dts[3]
> - No coherent DMA on this board
> Inferred by taking vendor ethernet and MMC drivers to the mainline
> kernel. Without dma-noncoherent in soc node, the driver fails.
> - No cache nodes now
> The parameters from vendor dts are likely to be wrong. It has 512
> sets for a 32KiB L1 Cache. In this case, each set is 64B in size.
> When the size of the cache line is 64B, it is a directly mapped
> cache rather than a set-associative cache, the latter is commonly
> used. Thus, I didn't use the parameters from vendor dts.
>
> Currently only support booting into console with only uart, other
> features will be added soon later.
>
> [1] https://docs.banana-pi.org/en/BPI-F3/SpacemiT_K1_datasheet
> [2] https://developer.spacemit.com/#/documentation?token=BWbGwbx7liGW21kq9lucSA6Vnpb
> [3] https://gitee.com/bianbu-linux/linux-6.1/blob/bl-v1.0.y/arch/riscv/boot/dts/spacemit/k1-x.dtsi
>
> Signed-off-by: Yangyu Chen <cyy@...self.name>
> Signed-off-by: Yixun Lan <dlan@...too.org>
> ---
> arch/riscv/boot/dts/spacemit/k1.dtsi | 378 +++++++++++++++++++++++++++++++++++
> 1 file changed, 378 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
> new file mode 100644
> index 0000000000000..a46149b0b9ff8
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2024 Yangyu Chen <cyy@...self.name>
> + */
> +
> +/dts-v1/;
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + model = "SpacemiT K1";
> + compatible = "spacemit,k1";
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart2;
> + serial2 = &uart3;
> + serial3 = &uart4;
> + serial4 = &uart5;
> + serial5 = &uart6;
> + serial6 = &uart7;
> + serial7 = &uart8;
> + serial8 = &uart9;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + timebase-frequency = <24000000>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu_0>;
> + };
> + core1 {
> + cpu = <&cpu_1>;
> + };
> + core2 {
> + cpu = <&cpu_2>;
> + };
> + core3 {
> + cpu = <&cpu_3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu_4>;
> + };
> + core1 {
> + cpu = <&cpu_5>;
> + };
> + core2 {
> + cpu = <&cpu_6>;
> + };
> + core3 {
> + cpu = <&cpu_7>;
> + };
> + };
> + };
> +
> + cpu_0: cpu@0 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <0>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_1: cpu@1 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <1>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_2: cpu@2 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <2>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_3: cpu@3 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <3>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_4: cpu@4 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <4>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_5: cpu@5 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <5>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu5_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_6: cpu@6 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <6>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu6_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu_7: cpu@7 {
> + compatible = "spacemit,x60", "riscv";
> + device_type = "cpu";
> + reg = <7>;
> + riscv,isa = "rv64imafdcv_zicbom_zicbop_zicboz_zicntr_zicond_zicsr_zifencei_zihintpause_zihpm_zfh_zba_zbb_zbc_zbs_zkt_zvfh_zvkt_sscofpmf_sstc_svinval_svnapot_svpbmt";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "v", "zicbom",
> + "zicbop", "zicboz", "zicntr", "zicond", "zicsr",
> + "zifencei", "zihintpause", "zihpm", "zfh", "zba",
> + "zbb", "zbc", "zbs", "zkt", "zvfh", "zvkt",
> + "sscofpmf", "sstc", "svinval", "svnapot", "svpbmt";
> + riscv,cbom-block-size = <64>;
> + riscv,cbop-block-size = <64>;
> + riscv,cboz-block-size = <64>;
> + mmu-type = "riscv,sv39";
> +
> + cpu7_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + dma-noncoherent;
> + ranges;
> +
> + plic: interrupt-controller@...00000 {
> + compatible = "spacemit,k1-plic", "riscv,plic0";
> + reg = <0x0 0xe0000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>,
> + <&cpu5_intc 11>, <&cpu5_intc 9>,
> + <&cpu6_intc 11>, <&cpu6_intc 9>,
> + <&cpu7_intc 11>, <&cpu7_intc 9>;
> + interrupt-controller;
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + riscv,ndev = <159>;
> + };
> +
> + clint: timer@...00000 {
> + compatible = "spacemit,k1-clint", "sifive,clint0";
> + reg = <0x0 0xe4000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>,
> + <&cpu5_intc 3>, <&cpu5_intc 7>,
> + <&cpu6_intc 3>, <&cpu6_intc 7>,
> + <&cpu7_intc 3>, <&cpu7_intc 7>;
> + };
> +
> + uart0: serial@...17000 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017000 0x0 0x100>;
> + interrupts = <42>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + /* note: uart1 skipped */
The datasheet page you link to above says "-UART (×10)", but here you're
skipping one of them. Why? I can see the vendor tree does the same, but it
would be nice with an explanation of what's going on.
> +
> + uart2: uart@...17100 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017100 0x0 0x100>;
> + interrupts = <44>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart3: uart@...17200 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017200 0x0 0x100>;
> + interrupts = <45>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart4: uart@...17300 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017300 0x0 0x100>;
> + interrupts = <46>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart5: uart@...17400 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017400 0x0 0x100>;
> + interrupts = <47>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart6: uart@...17500 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017500 0x0 0x100>;
> + interrupts = <48>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart7: uart@...17600 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017600 0x0 0x100>;
> + interrupts = <49>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart8: uart@...17700 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017700 0x0 0x100>;
> + interrupts = <50>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> +
> + uart9: uart@...17800 {
> + compatible = "spacemit,k1-uart", "intel,xscale-uart";
> + reg = <0x0 0xd4017800 0x0 0x100>;
> + interrupts = <51>;
> + clock-frequency = <14857000>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + status = "disabled";
> + };
> + };
> +};
>
> --
> 2.45.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists