[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240702164403.29067-2-afd@ti.com>
Date: Tue, 2 Jul 2024 11:44:01 -0500
From: Andrew Davis <afd@...com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero
Kristo <kristo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley
<conor+dt@...nel.org>, Andrew Lunn <andrew@...n.ch>,
Vaishnav M A
<vaishnav@...gleboard.org>,
Derek Kiernan <derek.kiernan@....com>,
Dragan
Cvetic <dragan.cvetic@....com>, Arnd Bergmann <arnd@...db.de>,
Michael Walle
<mwalle@...nel.org>,
Jason Kridner <jkridner@...gleboard.org>,
Robert Nelson
<robertcnelson@...gleboard.org>,
Robert Nelson <robertcnelson@...il.com>,
Ayush Singh <ayush@...gleboard.org>,
Ayush Singh <ayushdevel1325@...il.com>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Andrew Davis <afd@...com>
Subject: [PATCH RFC 1/3] arm64: dts: ti: k3-am625-beagleplay: Add Grove connector pinmux options
The Grove connector pins on BeaglePlay supports 3 different functions.
Describe these here.
Also move the default to be selected by a new Grove connector node.
As I2C is not the only possible function, do not enable main_i2c1.
It should only be enabled when a add-on board is connected that
makes use of it. That enabling should be done by the add-on board's
overlay.
Signed-off-by: Andrew Davis <afd@...com>
---
.../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 32 +++++++++++++++----
1 file changed, 25 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 70de288d728e4..004eb5c24a84c 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -227,6 +227,10 @@ simple-audio-card,codec {
};
};
+ grove_connector0: grove-connector0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&grove_pins_default>;
+ };
};
&main_pmx0 {
@@ -270,6 +274,27 @@ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
>;
};
+ grove_pins_digital: grove-digital-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e8, PIN_INPUT, 7) /* (B17) I2C1_SCL.GPIO1_28 */
+ AM62X_IOPAD(0x01ec, PIN_INPUT, 7) /* (A17) I2C1_SDA.GPIO1_29 */
+ >;
+ };
+
+ grove_pins_uart: grove-uart-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e8, PIN_INPUT, 1) /* (B17) I2C1_SCL.UART1_RXD */
+ AM62X_IOPAD(0x01ec, PIN_OUTPUT, 1) /* (A17) I2C1_SDA.UART1_TXD */
+ >;
+ };
+
+ grove_pins_i2c: grove-i2c-pins {
+ pinctrl-single,pins = <
+ AM62X_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+ AM62X_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+ >;
+ };
+
local_i2c_pins_default: local-i2c-default-pins {
bootph-all;
pinctrl-single,pins = <
@@ -753,13 +778,6 @@ ldo4_reg: ldo4 {
};
};
-&main_i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&grove_pins_default>;
- clock-frequency = <100000>;
- status = "okay";
-};
-
&main_i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_1v8_pins_default>;
--
2.39.2
Powered by blists - more mailing lists