[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <02dbe022-b45d-43eb-8769-bcf2a92e7c6f@quicinc.com>
Date: Tue, 2 Jul 2024 16:38:47 -0700
From: Sagar Cheluvegowda <quic_scheluve@...cinc.com>
To: "Russell King (Oracle)" <linux@...linux.org.uk>
CC: Vinod Koul <vkoul@...nel.org>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
"David S.
Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
"Jakub
Kicinski" <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin
<mcoquelin.stm32@...il.com>,
Rob Herring <robh@...nel.org>,
"Krzysztof
Kozlowski" <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
"Bhupesh
Sharma" <bhupesh.sharma@...aro.org>, <kernel@...cinc.com>,
Andrew Halaney
<ahalaney@...hat.com>, Andrew Lunn <andrew@...n.ch>,
<linux-arm-msm@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
Subject: Re: [PATCH v2 3/3] net: stmmac: Bring down the clocks to lower
frequencies when mac link goes down
On 6/28/2024 3:16 PM, Russell King (Oracle) wrote:
> On Tue, Jun 25, 2024 at 04:49:30PM -0700, Sagar Cheluvegowda wrote:
>> When mac link goes down we don't need to mainitain the clocks to operate
>> at higher frequencies, as an optimized solution to save power when
>> the link goes down we are trying to bring down the clocks to the
>> frequencies corresponding to the lowest speed possible.
>
> I thought I had already commented on a similar patch, but I can't find
> anything in my mailboxes to suggest I had.
>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index ec7c61ee44d4..f0166f0bc25f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -996,6 +996,9 @@ static void stmmac_mac_link_down(struct phylink_config *config,
>> {
>> struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
>>
>> + if (priv->plat->fix_mac_speed)
>> + priv->plat->fix_mac_speed(priv->plat->bsp_priv, SPEED_10, mode);
>> +
>> stmmac_mac_set(priv, priv->ioaddr, false);
>> priv->eee_active = false;
>> priv->tx_lpi_enabled = false;
>> @@ -1004,6 +1007,11 @@ static void stmmac_mac_link_down(struct phylink_config *config,
>>
>> if (priv->dma_cap.fpesel)
>> stmmac_fpe_link_state_handle(priv, false);
>> +
>> + stmmac_set_icc_bw(priv, SPEED_10);
>> +
>> + if (priv->plat->fix_mac_speed)
>> + priv->plat->fix_mac_speed(priv->plat->bsp_priv, SPEED_10, mode);
>
> Two things here:
>
> 1) Why do we need to call fix_mac_speed() at the start and end of this
> stmmac_mac_link_down()?
This was a typo, i will remove this.
>
> 2) What if the MAC doesn't support 10M operation? For example, dwxgmac2
> and dwxlgmac2 do not support anything below 1G. It feels that this
> is storing up a problem for the future, where a platform that uses
> e.g. xlgmac2 also implements fix_mac_speed() and then gets a
> surprise when it's called with SPEED_10.
>
> Personally, I don't like "fix_mac_speed", and I don't like it even more
> with this change. I would prefer to see link_up/link_down style
> operations so that platforms can do whatever they need to on those
> events, rather than being told what to do by a single call that may
> look identical irrespective of whether the link came up or went down.
>
I will drop this patch[3/3] from this series now and i will do some analysis
on platform level link up and link down functions and post the changes as a
new series altogether.
Powered by blists - more mailing lists