| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240702154413.968044-3-frieder@fris.de>
Date: Tue, 2 Jul 2024 17:43:20 +0200
From: Frieder Schrempf <frieder@...s.de>
To: Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org,
imx@...ts.linux.dev,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Rob Herring <robh@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>
Cc: Frieder Schrempf <frieder.schrempf@...tron.de>,
Alexander Stein <alexander.stein@...tq-group.com>,
Fabio Estevam <festevam@...il.com>,
Gregor Herburger <gregor.herburger@...tq-group.com>,
Joao Paulo Goncalves <joao.goncalves@...adex.com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Tim Harvey <tharvey@...eworks.com>
Subject: [PATCH 2/3] arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board
From: Frieder Schrempf <frieder.schrempf@...tron.de>
This adds support for the Kontron Electronics OSM-S i.MX8MP SoM
and the matching baseboard BL i.MX8MP.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@...tron.de>
---
arch/arm64/boot/dts/freescale/Makefile | 5 +
.../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++
.../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++
.../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++
4 files changed, 1332 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index bd443c2bc5a48..8688a85ba5a44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -170,6 +170,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
+
+imx8mp-kontron-dl-dtbs += imx8mp-kontron-bl-osm-s.dtb imx8mp-kontron-dl.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-dl.dtb
+
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-navqp.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
new file mode 100644
index 0000000000000..8fda582d12b4b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+
+#include "imx8mp-kontron-osm-s.dtsi"
+
+/ {
+ model = "Kontron BL i.MX8MP OSM-S";
+ compatible = "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+ aliases {
+ ethernet0 = &fec;
+ ethernet1 = &eqos;
+ };
+
+ extcon_usbc: usbc {
+ compatible = "linux,extcon-usb-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_id>;
+ id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ pwm-beeper {
+ compatible = "pwm-beeper";
+ pwms = <&pwm2 0 5000 0>;
+ };
+
+ reg_vcc_panel: regulator-vcc-panel {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VCC_PANEL";
+ };
+};
+
+&ecspi2 {
+ status = "okay";
+
+ eeram@0 {
+ compatible = "microchip,48l640";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ };
+};
+
+&eqos { /* Second ethernet (OSM-S ETH_B) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos_rgmii>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ pinctrl-0 = <&pinctrl_ethphy1>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fec { /* First ethernet (OSM-S ETH_A) */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_rgmii>;
+ phy-connection-type = "rgmii-id";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-id4f51.e91b";
+ reg = <1>;
+ pinctrl-0 = <&pinctrl_ethphy0>;
+ pinctrl-names = "default";
+ reset-assert-us = <10000>;
+ reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&flexcan1 {
+ status = "okay";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * SDIO_A_PWR_EN -> CAN_ADDR2
+ * SDIO_A_WP -> CAN_ADDR3
+ */
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio2>;
+ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+ "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+ "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "CAN_ADDR2",
+ "CAN_ADDR3";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * SPI_A_WP -> CAN_ADDR0
+ * SPI_A_HOLD -> CAN_ADDR1
+ * GPIO_B_0 -> DIO1_OUT
+ * GPIO_B_1 -> DIO2_OUT
+ */
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+ gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+ "SDIO_B_D6", "SDIO_B_D7", "CAN_ADDR0", "CAN_ADDR1",
+ "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+ "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+ "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "DIO1_OUT",
+ "DIO2_OUT", "", "BOOT_SEL0", "BOOT_SEL1",
+ "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+ "HDMI_CEC", "HDMI_HPD";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ * GPIO_B_5 -> DIO2_IN
+ * GPIO_B_6 -> DIO3_IN
+ * GPIO_B_7 -> DIO4_IN
+ * GPIO_B_3 -> DIO4_OUT
+ * GPIO_B_4 -> DIO1_IN
+ * GPIO_B_2 -> DIO3_OUT
+ */
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+ gpio-line-names = "DIO2_IN", "DIO3_IN", "DIO4_IN", "GPIO_C_0",
+ "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+ "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+ "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "DIO4_OUT", "DIO1_IN",
+ "DIO3_OUT", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+ "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+ "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+&hdmi_pvi {
+ status = "okay";
+};
+
+&hdmi_tx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ ddc-i2c-bus = <&i2c4>;
+ status = "okay";
+};
+
+&hdmi_tx_phy {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ gpio_expander_dio: gpio@20 {
+ compatible = "ti,tca6408";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "DIO1_OUT","DIO1_IN", "DIO2_OUT","DIO2_IN",
+ "DIO3_OUT","DIO3_IN", "DIO4_OUT","DIO4_IN";
+ interrupt-parent = <&gpio3>;
+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+ reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&lcdif3 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+®_usdhc2_vcc {
+ status = "disabled";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 {
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ linux,rs485-enabled-at-boot-time;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usb_dwc3_0 {
+ adp-disable;
+ hnp-disable;
+ srp-disable;
+
+ dr_mode = "otg";
+ extcon = <&extcon_usbc>;
+ usb-role-switch;
+ status = "okay";
+};
+
+&usb_dwc3_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_hub>;
+ dr_mode = "host";
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb1@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usb3_0 {
+ status = "okay";
+};
+
+&usb3_1 {
+ fsl,disable-port-power-control;
+ fsl,permanently-attached;
+ status = "okay";
+};
+
+&usb3_phy0 {
+ vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
+
+&usb3_phy1 {
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_vdd_3v3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ethphy0: ethphy0grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x46
+ >;
+ };
+
+ pinctrl_ethphy1: ethphy1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x46
+ >;
+ };
+
+ pinctrl_gpio2: gpio2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x46
+ MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x46
+ >;
+ };
+
+ pinctrl_usb_hub: usbhubgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x46
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
new file mode 100644
index 0000000000000..f2f2f07f9b4f7
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2023 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx8mp-pinfunc.h"
+
+&{/} {
+ model = "Kontron DL i.MX8MP OSM-S";
+ compatible = "kontron,imx8mp-dl-osm-s", "kontron,imx8mp-bl-osm-s", "kontron,imx8mp-osm-s",
+ "fsl,imx8mp";
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 50000 0>;
+ brightness-levels = <0 100>;
+ num-interpolated-steps = <100>;
+ default-brightness-level = <100>;
+ };
+
+ panel {
+ compatible = "panel-lvds";
+ width-mm = <154>;
+ height-mm = <86>;
+ data-mapping = "vesa-24";
+ backlight = <&backlight>;
+ enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ power-supply = <®_vcc_panel>;
+
+ panel-timing {
+ clock-frequency = <50000000>;
+ hactive = <1024>;
+ hback-porch = <80>;
+ hfront-porch = <40>;
+ hsync-len = <40>;
+ vactive = <600>;
+ vback-porch = <10>;
+ vfront-porch = <3>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ port {
+ panel_in_lvds0: endpoint {
+ remote-endpoint = <&ldb_lvds_ch0>;
+ };
+ };
+ };
+};
+
+&gpio4 {
+ panel_rst {
+ gpio-hog;
+ gpios = <21 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-reset";
+ };
+
+ panel_stby {
+ gpio-hog;
+ gpios = <28 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "panel-standby";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_panel_stby>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ gt911@5d {
+ compatible = "goodix,gt928";
+ reg = <0x5d>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <6 8>;
+ irq-gpios = <&gpio1 6 0>;
+ power-supply = <®_vcc_panel>;
+ reset-gpios = <&gpio1 7 0>;
+ };
+};
+
+&lcdif2 {
+ status = "okay";
+};
+
+&ldb_lvds_ch0 {
+ remote-endpoint = <&panel_in_lvds0>;
+};
+
+&lvds_bridge {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_panel_stby: panelstbygrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x19
+ >;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
new file mode 100644
index 0000000000000..892710e4f9d1b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi
@@ -0,0 +1,908 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2022 Kontron Electronics GmbH
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx8mp.dtsi"
+
+/ {
+ model = "Kontron OSM-S i.MX8MP";
+ compatible = "kontron,imx8mp-osm-s", "fsl,imx8mp";
+
+ aliases {
+ rtc0 = &rv3028;
+ rtc1 = &snvs_rtc;
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ /*
+ * There are multiple SoM flavors with different DDR sizes.
+ * The smallest is 1GB. For larger sizes the bootloader will
+ * update the reg property.
+ */
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ reg_usb1_vbus: regulator-usb1-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb1_vbus>;
+ enable-active-high;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "VBUS_USB_A";
+ };
+
+ reg_usb2_vbus: regulator-usb2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usb2_vbus>;
+ enable-active-high;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-name = "VBUS_USB_B";
+ };
+
+ reg_usdhc2_vcc: regulator-usdhc2-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vcc>;
+ enable-active-high;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "VCC_SDIO_A";
+ };
+
+ reg_usdhc3_vcc: regulator-usdhc3-vcc {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc3_vcc>;
+ enable-active-high;
+ gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "VCC_SDIO_B";
+ };
+
+ reg_vdd_carrier: regulator-vdd-carrier {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+ enable-active-high;
+ gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "VDD_CARRIER";
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
+ };
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&A53_0 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_1 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_2 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&A53_3 {
+ cpu-supply = <®_vdd_arm>;
+};
+
+&ecspi1 { /* OSM-S SPI_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi2 { /* OSM-S SPI_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+};
+
+&flexcan1 { /* OSM-S CAN_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&flexcan2 { /* OSM-S CAN_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>;
+ gpio-line-names = "GPIO_A_0", "GPIO_A_1", "", "",
+ "", "GPIO_A_2", "GPIO_A_3", "GPIO_A_4",
+ "GPIO_A_5", "USB_B_EN", "USB_A_ID", "USB_B_ID",
+ "USB_A_EN", "USB_A_OC","CAM_MCK", "USB_B_OC",
+ "ETH_B_MDC", "ETH_B_MDIO", "ETH_B_TXD3", "ETH_B_TXD2",
+ "ETH_B_TXD1", "ETH_B_TXD0", "ETH_B_TX_EN", "ETH_B_TX_CLK",
+ "ETH_B_RX_DV", "ETH_B_RX_CLK", "ETH_B_RXD0", "ETH_B_RXD1",
+ "ETH_B_RXD2", "ETH_B_RXD3";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "", "", "", "", "",
+ "SDIO_A_CD", "SDIO_A_CLK", "SDIO_A_CMD", "SDIO_A_D0",
+ "SDIO_A_D1", "SDIO_A_D2", "SDIO_A_D3", "SDIO_A_PWR_EN",
+ "SDIO_A_WP";
+};
+
+&gpio3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio3>;
+ gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
+ "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
+ "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
+ "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
+ "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "GPIO_B_0",
+ "GPIO_B_1", "", "BOOT_SEL0", "BOOT_SEL1",
+ "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
+ "HDMI_CEC", "HDMI_HPD";
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+ gpio-line-names = "GPIO_B_5", "GPIO_B_6", "GPIO_B_7", "GPIO_C_0",
+ "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
+ "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
+ "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
+ "ETH_A_TX_EN", "ETH_A_TX_CLK", "GPIO_B_3", "GPIO_B_4",
+ "GPIO_B_2", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+ "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
+ "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+&gpio5 {
+ gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+ "PWM_1", "PWM_0", "SPI_A_SCK", "SPI_A_SDO",
+ "SPI_A_SDI", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+ "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+ "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+ "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+ "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+ "UART_B_RX", "UART_B_TX";
+};
+
+&i2c1 { /* OSM-S I2C_A */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c2 { /* OSM-S I2C_B */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 { /* OSM-S PCIe SMDAT/SMCLK */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c4 { /* OSM-S I2C_CAM */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c5 { /* PMIC, EEPROM, RTC */
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c5>;
+ pinctrl-1 = <&pinctrl_i2c5_gpio>;
+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio3 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ pca9450: pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ nxp,i2c-lt-enable;
+
+ regulators {
+ reg_vdd_soc: BUCK1 { /* dual phase with BUCK3 */
+ regulator-name = "+0V8_VDD_SOC (BUCK1)";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_vdd_arm: BUCK2 {
+ regulator-name = "+0V9_VDD_ARM (BUCK2)";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ reg_vdd_3v3: BUCK4 {
+ regulator-name = "+3V3 (BUCK4)";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdd_1v8: BUCK5 {
+ regulator-name = "+1V8 (BUCK5)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_dram: BUCK6 {
+ regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_snvs: LDO1 {
+ regulator-name = "+1V8_NVCC_SNVS (LDO1)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vdda: LDO3 {
+ regulator-name = "+1V8_VDDA (LDO3)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_nvcc_sd: LDO5 {
+ regulator-name = "NVCC_SD (LDO5)";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ eeprom@50 {
+ compatible = "onnn,n24s64b", "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ size = <8192>;
+ num-addresses = <1>;
+ };
+
+ rv3028: rtc@52 {
+ compatible = "microcrystal,rv3028";
+ reg = <0x52>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupts-extended = <&gpio3 24 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pwm1 { /* OSM-S PWM_0 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 { /* OSM-S PWM_1 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 { /* OSM-S PWM_2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&sai3 { /* OSM-S I2S_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai3>;
+};
+
+&uart1 { /* OSM-S UART_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 { /* OSM-S UART_C */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 { /* OSM-S UART_CON */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&uart4 { /* OSM-S UART_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&usb3_0 { /* OSM-S USB_A */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1_oc>;
+ fsl,over-current-active-low;
+};
+
+&usb3_1 { /* OSM-S USB_B */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2_oc>;
+ fsl,over-current-active-low;
+};
+
+&usdhc1 { /* eMMC */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ vmmc-supply = <®_vdd_3v3>;
+ vqmmc-supply = <®_vdd_1v8>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 { /* OSM-S SDIO_A */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>, <&pinctrl_usdhc2_wp>;
+ vmmc-supply = <®_usdhc2_vcc>;
+ vqmmc-supply = <®_nvcc_sd>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+};
+
+&usdhc3 { /* OSM-S SDIO_B */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+ vmmc-supply = <®_usdhc3_vcc>;
+ vqmmc-supply = <®_nvcc_sd>;
+ cd-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_csi_mck: csimckgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO14__CCM_CLKO1 0x59 /* CAM_MCK */
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44 /* SPI_A_SDI_(IO0) */
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44 /* SPI_A_SDO_(IO1) */
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44 /* SPI_A_SCK */
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40 /* SPI_A_CS0# */
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44 /* SPI_B_SDI */
+ MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44 /* SPI_B_SDO */
+ MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44 /* SPI_B_SCK */
+ MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40 /* SPI_B_CS0# */
+ >;
+ };
+
+ pinctrl_enet_rgmii: enetrgmiigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3 /* ETH_MDC */
+ MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3 /* ETH_MDIO */
+ MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 /* ETH_A_(S)(R)(G)MII_RXD0 */
+ MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 /* ETH_A_(S)(R)(G)MII_RXD1 */
+ MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 /* ETH_A_(R)(G)MII_RXD2 */
+ MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 /* ETH_A_(R)(G)MII_RXD3 */
+ MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 /* ETH_A_(R)(G)MII_RX_CLK */
+ MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 /* ETH_A_(R)(G)MII_RX_DV(_ER) */
+ MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f /* ETH_A_(S)(R)(G)MII_TXD0 */
+ MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f /* ETH_A_(S)(R)(G)MII_TXD1 */
+ MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f /* ETH_A_(S)(R)(G)MII_TXD2 */
+ MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f /* ETH_A_(S)(R)(G)MII_TXD3 */
+ MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f /* ETH_A_(R)(G)MII_TX_CLK */
+ MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f /* ETH_A_(R)(G)MII_TX_EN(_ER) */
+ >;
+ };
+
+ pinctrl_eqos_rgmii: eqosrgmiigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 /* ETH_B_MDC */
+ MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 /* ETH_B_MDIO */
+ MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 /* ETH_B_(S)(R)(G)MII_RXD0 */
+ MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 /* ETH_B_(S)(R)(G)MII_RXD1 */
+ MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 /* ETH_B_(R)(G)MII_RXD2 */
+ MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 /* ETH_B_(R)(G)MII_RXD3 */
+ MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 /* ETH_B_(R)(G)MII_RX_CLK */
+ MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 /* ETH_B_(R)(G)MII_RX_DV(_ER) */
+ MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f /* ETH_B_(S)(R)(G)MII_TXD0 */
+ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f /* ETH_B_(S)(R)(G)MII_TXD1 */
+ MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f /* ETH_B_(S)(R)(G)MII_TXD2 */
+ MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f /* ETH_B_(S)(R)(G)MII_TXD3 */
+ MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f /* ETH_B_(R)(G)MII_TX_CLK */
+ MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f /* ETH_B_(R)(G)MII_TX_EN(_ER) */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_RXC__CAN1_TX 0x154 /* CAN_A_TX */
+ MX8MP_IOMUXC_SAI2_TXC__CAN1_RX 0x154 /* CAN_A_RX */
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI2_TXD0__CAN2_TX 0x154 /* CAN_B_TX */
+ MX8MP_IOMUXC_SAI2_MCLK__CAN2_RX 0x154 /* CAN_B_RX */
+ >;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x19 /* GPIO_A_0 */
+ MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x19 /* GPIO_A_1 */
+ MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x19 /* GPIO_A_2 */
+ MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x19 /* GPIO_A_3 */
+ MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x19 /* GPIO_A_4 */
+ MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x19 /* GPIO_A_5 */
+ >;
+ };
+
+ pinctrl_gpio3: gpio3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_CE0_B__GPIO3_IO01 0x19 /* GPIO_A_7 */
+ MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x19 /* GPIO_B_0 */
+ MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x19 /* GPIO_B_1 */
+ MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x19 /* BOOT_SEL0# */
+ MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x19 /* BOOT_SEL1# */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x19 /* GPIO_B_5 */
+ MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x19 /* GPIO_B_6 */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x19 /* GPIO_B_7 */
+ MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x19 /* GPIO_C_0 */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19 /* GPIO_B_3 */
+ MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19 /* GPIO_B_4 */
+ MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x19 /* GPIO_B_2 */
+ MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x19 /* GPIO_A_6 */
+ >;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x19 /* HDMI_HPD */
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x40000084 /* I2C_A_SCL */
+ MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x40000084 /* I2C_A_SDA */
+ >;
+ };
+
+ pinctrl_i2c1_gpio: i2c1gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x84 /* I2C_A_SCL */
+ MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x84 /* I2C_A_SDA */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x40000084 /* I2C_B_SCL */
+ MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x40000084 /* I2C_B_SDA */
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x84 /* I2C_B_SCL */
+ MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x84 /* I2C_B_SDA */
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084 /* PCIe_SMCLK */
+ MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084 /* PCIe_SMDAT */
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84 /* PCIe_SMCLK */
+ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84 /* PCIe_SMDAT */
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084 /* I2C_CAM_SCL/CSI_TX_P */
+ MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084 /* I2C_CAM_SDA/CSI_TX_N */
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84 /* I2C_CAM_SCL/CSI_TX_P */
+ MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84 /* I2C_CAM_SDA/CSI_TX_N */
+ >;
+ };
+
+ pinctrl_i2c5: i2c5grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__I2C5_SCL 0x40000084
+ MX8MP_IOMUXC_SAI5_MCLK__I2C5_SDA 0x40000084
+ >;
+ };
+
+ pinctrl_i2c5_gpio: i2c5gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x84
+ MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x84
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART4_RXD__PCIE_CLKREQ_B 0x19 /* PCIe_CLKREQ# */
+ MX8MP_IOMUXC_NAND_CE1_B__GPIO3_IO02 0x19 /* PCIe_A_PERST# */
+ MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x19 /* PCIe_WAKE# */
+ MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 /* PCIe_SM_ALERT */
+ >;
+ };
+
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x1c0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT 0x6 /* PWM_0 */
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__PWM2_OUT 0x6 /* PWM_1 */
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_TX__PWM3_OUT 0x6 /* PWM_2 */
+ >;
+ };
+
+ pinctrl_reg_usb1_vbus: regusb1vbusgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x19 /* USB_A_EN */
+ >;
+ };
+
+ pinctrl_reg_usb2_vbus: regusb2vbusgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x19 /* USB_B_EN */
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vcc: regusdhc2vccgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x19 /* SDIO_A_PWR_EN */
+ >;
+ };
+
+ pinctrl_reg_usdhc3_vcc: regusdhc3vccgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x19 /* SDIO_B_PWR_EN */
+ >;
+ };
+
+ pinctrl_reg_vdd_carrier: regvddcarriergrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x19 /* CARRIER_PWR_EN */
+ >;
+ };
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x1c0
+ >;
+ };
+
+ pinctrl_sai3: sai3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00 0xd6 /* I2S_A_DATA_IN */
+ MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00 0xd6 /* I2S_A_DATA_OUT */
+ MX8MP_IOMUXC_SAI3_RXFS__AUDIOMIX_SAI3_RX_DATA01 0xd6 /* I2S_B_DATA_IN */
+ MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_DATA01 0xd6 /* I2S_B_DATA_OUT */
+ MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK 0xd6 /* I2S_MCLK */
+ MX8MP_IOMUXC_NAND_DATA01__AUDIOMIX_SAI3_TX_SYNC 0xd6 /* I2S_LRCLK */
+ MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK 0xd6 /* I2S_BITCLK */
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 /* UART_A_RX */
+ MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 /* UART_A_TX */
+ MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x140 /* UART_A_CTS */
+ MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x140 /* UART_A_RTS */
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 /* UART_C_RX */
+ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 /* UART_C_TX */
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140 /* UART_CON_RX */
+ MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140 /* UART_CON_TX */
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_DATA00__UART4_DCE_RX 0x140 /* UART_B_RX */
+ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 /* UART_B_TX */
+ MX8MP_IOMUXC_NAND_DATA03__UART4_DCE_RTS 0x140 /* UART_B_CTS */
+ MX8MP_IOMUXC_NAND_DATA02__UART4_DCE_CTS 0x140 /* UART_B_RTS */
+ >;
+ };
+
+ pinctrl_usb1_id: usb1idgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x1c4 /* USB_A_ID */
+ >;
+ };
+
+ pinctrl_usb1_oc: usb1ocgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x1c0 /* USB_A_OC# */
+ >;
+ };
+
+ pinctrl_usb2_id: usb2idgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO11__USB2_OTG_ID 0x1c4 /* USB_B_ID */
+ >;
+ };
+
+ pinctrl_usb2_oc: usb2ocgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x1c0 /* USB_B_OC# */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
+ MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x1d0
+ MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x1d0
+ MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x1d0
+ MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x1d0
+ MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x141
+ MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
+ MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x1d4
+ MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x1d4
+ MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x1d4
+ MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x1d4
+ MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x141
+ MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
+ MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
+ MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
+ MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
+ MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
+ MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
+ MX8MP_IOMUXC_SD1_DATA4__USDHC1_DATA4 0x1d6
+ MX8MP_IOMUXC_SD1_DATA5__USDHC1_DATA5 0x1d6
+ MX8MP_IOMUXC_SD1_DATA6__USDHC1_DATA6 0x1d6
+ MX8MP_IOMUXC_SD1_DATA7__USDHC1_DATA7 0x1d6
+ MX8MP_IOMUXC_SD1_RESET_B__USDHC1_RESET_B 0x141
+ MX8MP_IOMUXC_SD1_STROBE__USDHC1_STROBE 0x196
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190 /* SDIO_A_CLK */
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0 /* SDIO_A_CMD */
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0 /* SDIO_A_D0 */
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0 /* SDIO_A_D1 */
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0 /* SDIO_A_D2 */
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0 /* SDIO_A_D3 */
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194 /* SDIO_A_CLK */
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4 /* SDIO_A_CMD */
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4 /* SDIO_A_D0 */
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4 /* SDIO_A_D1 */
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4 /* SDIO_A_D2 */
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4 /* SDIO_A_D3 */
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196 /* SDIO_A_CLK */
+ MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6 /* SDIO_A_CMD */
+ MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6 /* SDIO_A_D0 */
+ MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6 /* SDIO_A_D1 */
+ MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6 /* SDIO_A_D2 */
+ MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6 /* SDIO_A_D3 */
+ MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x19 /* SDIO_A_CD# */
+ >;
+ };
+
+ pinctrl_usdhc2_wp: usdhc2wpgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SD2_WP__USDHC2_WP 0x400000d6 /* SDIO_A_WP */
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 /* SDIO_B_CLK */
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 /* SDIO_B_CMD */
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 /* SDIO_B_D0 */
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 /* SDIO_B_D1 */
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 /* SDIO_B_D2 */
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 /* SDIO_B_D3 */
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 /* SDIO_B_D4 */
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 /* SDIO_B_D5 */
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 /* SDIO_B_D6 */
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 /* SDIO_B_D7 */
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 /* SDIO_B_CLK */
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 /* SDIO_B_CMD */
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 /* SDIO_B_D0 */
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 /* SDIO_B_D1 */
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 /* SDIO_B_D2 */
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 /* SDIO_B_D3 */
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 /* SDIO_B_D4 */
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 /* SDIO_B_D5 */
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 /* SDIO_B_D6 */
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 /* SDIO_B_D7 */
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 /* SDIO_B_CLK */
+ MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 /* SDIO_B_CMD */
+ MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 /* SDIO_B_D0 */
+ MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 /* SDIO_B_D1 */
+ MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 /* SDIO_B_D2 */
+ MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 /* SDIO_B_D3 */
+ MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 /* SDIO_B_D4 */
+ MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 /* SDIO_B_D5 */
+ MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 /* SDIO_B_D6 */
+ MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 /* SDIO_B_D7 */
+ >;
+ };
+
+ pinctrl_usdhc3_gpio: usdhc3gpiogrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x19 /* SDIO_B_CD# */
+ MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x19 /* SDIO_B_WP */
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--
2.45.2
Powered by blists - more mailing lists