linux-kernel - [PATCH net-next v15 10/14] net: ethtool: pse-pd: Target the command to the requested PHY

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240703140806.271938-11-maxime.chevallier@bootlin.com>
Date: Wed,  3 Jul 2024 16:08:00 +0200
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
	netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	thomas.petazzoni@...tlin.com,
	Andrew Lunn <andrew@...n.ch>,
	Jakub Kicinski <kuba@...nel.org>,
	Eric Dumazet <edumazet@...gle.com>,
	Paolo Abeni <pabeni@...hat.com>,
	Russell King <linux@...linux.org.uk>,
	linux-arm-kernel@...ts.infradead.org,
	Christophe Leroy <christophe.leroy@...roup.eu>,
	Herve Codina <herve.codina@...tlin.com>,
	Florian Fainelli <f.fainelli@...il.com>,
	Heiner Kallweit <hkallweit1@...il.com>,
	Vladimir Oltean <vladimir.oltean@....com>,
	Köry Maincent <kory.maincent@...tlin.com>,
	Jesse Brandeburg <jesse.brandeburg@...el.com>,
	Marek Behún <kabel@...nel.org>,
	Piergiorgio Beruto <piergiorgio.beruto@...il.com>,
	Oleksij Rempel <o.rempel@...gutronix.de>,
	Nicolò Veronese <nicveronese@...il.com>,
	Simon Horman <horms@...nel.org>,
	mwojtas@...omium.org,
	Nathan Chancellor <nathan@...nel.org>,
	Antoine Tenart <atenart@...nel.org>,
	Marc Kleine-Budde <mkl@...gutronix.de>,
	Dan Carpenter <dan.carpenter@...aro.org>
Subject: [PATCH net-next v15 10/14] net: ethtool: pse-pd: Target the command to the requested PHY

PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.

Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
 net/ethtool/pse-pd.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index 2c981d443f27..f8c6fe552d3c 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -28,15 +28,13 @@ struct pse_reply_data {
 /* PSE_GET */
 
 const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
 				  struct netlink_ext_ack *extack,
 				  struct pse_reply_data *data)
 {
-	struct phy_device *phydev = dev->phydev;
-
 	if (!phydev) {
 		NL_SET_ERR_MSG(extack, "No PHY is attached");
 		return -EOPNOTSUPP;
@@ -58,13 +56,20 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
 {
 	struct pse_reply_data *data = PSE_REPDATA(reply_base);
 	struct net_device *dev = reply_base->dev;
+	struct nlattr **tb = info->attrs;
+	struct phy_device *phydev;
 	int ret;
 
 	ret = ethnl_ops_begin(dev);
 	if (ret < 0)
 		return ret;
 
-	ret = pse_get_pse_attributes(dev, info->extack, data);
+	phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev))
+		return -ENODEV;
+
+	ret = pse_get_pse_attributes(phydev, info->extack, data);
 
 	ethnl_ops_complete(dev);
 
@@ -123,7 +128,7 @@ static int pse_fill_reply(struct sk_buff *skb,
 /* PSE_SET */
 
 const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -135,12 +140,12 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
 static int
 ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	phydev = dev->phydev;
-	if (!phydev) {
+	phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev)) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
 		return -EOPNOTSUPP;
 	}
@@ -171,12 +176,15 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 static int
 ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	phydev = dev->phydev;
+	phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev))
+		return -ENODEV;
+
 	/* These values are already validated by the ethnl_pse_set_policy */
 	if (pse_has_podl(phydev->psec))
 		config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
-- 
2.45.1