| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <cd0a3b47d457f6de192d2b2af1fd6a61a2c344a0.camel@mediatek.com>
Date: Wed, 3 Jul 2024 02:49:52 +0000
From: Chris Lu (陸稚泓) <Chris.Lu@...iatek.com>
To: "luiz.dentz@...il.com" <luiz.dentz@...il.com>
CC: "marcel@...tmann.org" <marcel@...tmann.org>,
"linux-mediatek@...ts.infradead.org" <linux-mediatek@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-bluetooth@...r.kernel.org" <linux-bluetooth@...r.kernel.org>,
"johan.hedberg@...il.com" <johan.hedberg@...il.com>,
Steve Lee (李視誠) <steve.lee@...iatek.com>, Sean Wang
<Sean.Wang@...iatek.com>, Aaron Hou (侯俊仰)
<Aaron.Hou@...iatek.com>
Subject: Re: [PATCH v6 8/8] Bluetooth: btusb: mediatek: add ISO data
transmission functions
Hi Luiz,
On Tue, 2024-07-02 at 14:22 -0400, Luiz Augusto von Dentz
wrote:
>
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> Hi Chris,
>
> On Tue, Jul 2, 2024 at 7:31 AM Chris Lu <chris.lu@...iatek.com>
> wrote:
> >
> > This patch implements functions for ISO data send and receive in
> btusb
> > driver for MediaTek's controller.
> >
> > MediaTek defines a specific interrupt endpoint for ISO data
> transmissin
> > because the characteristics of interrupt endpoint are similar to
> the
> > application of ISO data which can support guaranteed transmissin
> > bandwidth, enough maximum data length and error checking mechanism.
> >
> > Driver sets up ISO interface and endpoints in btusb_mtk_setup and
> clears
> > the setup in btusb_mtk_shutdown. These flow can't move to btmtk.c
> due to
> > btusb_driver is only defined in btusb.c when claiming/relaesing
> interface.
> > ISO packet anchor stops when driver suspending and resubmit
> interrupt urb
> > for ISO data when driver resuming.
> >
> > Signed-off-by: Chris Lu <chris.lu@...iatek.com>
> > ---
> > drivers/bluetooth/btmtk.c | 303
> ++++++++++++++++++++++++++++++++++++++
> > drivers/bluetooth/btmtk.h | 36 +++++
> > drivers/bluetooth/btusb.c | 68 +++++++++
> > 3 files changed, 407 insertions(+)
> >
> > diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
> > index fe3b892f6c6e..dfeae9c283a9 100644
> > --- a/drivers/bluetooth/btmtk.c
> > +++ b/drivers/bluetooth/btmtk.c
> > @@ -22,6 +22,9 @@
> > #define MTK_SEC_MAP_COMMON_SIZE 12
> > #define MTK_SEC_MAP_NEED_SEND_SIZE 52
> >
> > +/* It is for mt79xx iso data transmission setting */
> > +#define MTK_ISO_THRESHOLD 264
> > +
> > struct btmtk_patch_header {
> > u8 datetime[16];
> > u8 platform[4];
> > @@ -963,6 +966,300 @@ int btmtk_usb_recv_acl(struct hci_dev *hdev,
> struct sk_buff *skb)
> > }
> > EXPORT_SYMBOL_GPL(btmtk_usb_recv_acl);
> >
> > +static int btmtk_isopkt_pad(struct hci_dev *hdev, struct sk_buff
> *skb)
> > +{
> > + if (skb->len > MTK_ISO_THRESHOLD)
> > + return -EINVAL;
> > +
> > + if (skb_pad(skb, MTK_ISO_THRESHOLD - skb->len))
> > + return -ENOMEM;
> > +
> > + __skb_put(skb, MTK_ISO_THRESHOLD - skb->len);
> > +
> > + return 0;
> > +}
> > +
> > +static int __set_mtk_intr_interface(struct hci_dev *hdev)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > + struct usb_interface *intf = btmtk_data->isopkt_intf;
> > + int i, err;
> > +
> > + if (!btmtk_data->isopkt_intf)
> > + return -ENODEV;
> > +
> > + err = usb_set_interface(btmtk_data->udev, MTK_ISO_IFNUM,
> 1);
> > + if (err < 0) {
> > + bt_dev_err(hdev, "setting interface failed (%d)",
> -err);
> > + return err;
> > + }
> > +
> > + btmtk_data->isopkt_tx_ep = NULL;
> > + btmtk_data->isopkt_rx_ep = NULL;
> > +
> > + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints;
> i++) {
> > + struct usb_endpoint_descriptor *ep_desc;
> > +
> > + ep_desc = &intf->cur_altsetting->endpoint[i].desc;
> > +
> > + if (!btmtk_data->isopkt_tx_ep &&
> > + usb_endpoint_is_int_out(ep_desc)) {
> > + btmtk_data->isopkt_tx_ep = ep_desc;
> > + continue;
> > + }
> > +
> > + if (!btmtk_data->isopkt_rx_ep &&
> > + usb_endpoint_is_int_in(ep_desc)) {
> > + btmtk_data->isopkt_rx_ep = ep_desc;
> > + continue;
> > + }
> > + }
> > +
> > + if (!btmtk_data->isopkt_tx_ep ||
> > + !btmtk_data->isopkt_rx_ep) {
> > + bt_dev_err(hdev, "invalid interrupt descriptors");
> > + return -ENODEV;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +struct urb *alloc_mtk_intr_urb(struct hci_dev *hdev, struct
> sk_buff *skb,
> > + usb_complete_t tx_complete)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > + struct urb *urb;
> > + unsigned int pipe;
> > +
> > + if (!btmtk_data->isopkt_tx_ep)
> > + return ERR_PTR(-ENODEV);
> > +
> > + urb = usb_alloc_urb(0, GFP_KERNEL);
> > + if (!urb)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + if (btmtk_isopkt_pad(hdev, skb))
> > + return ERR_PTR(-EINVAL);
> > +
> > + pipe = usb_sndintpipe(btmtk_data->udev,
> > + btmtk_data->isopkt_tx_ep-
> >bEndpointAddress);
> > +
> > + usb_fill_int_urb(urb, btmtk_data->udev, pipe,
> > + skb->data, skb->len, tx_complete,
> > + skb, btmtk_data->isopkt_tx_ep->bInterval);
> > +
> > + skb->dev = (void *)hdev;
> > +
> > + return urb;
> > +}
> > +EXPORT_SYMBOL_GPL(alloc_mtk_intr_urb);
> > +
> > +static int btmtk_recv_isopkt(struct hci_dev *hdev, void *buffer,
> int count)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > + struct sk_buff *skb;
> > + unsigned long flags;
> > + int err = 0;
> > +
> > + spin_lock_irqsave(&btmtk_data->isorxlock, flags);
> > + skb = btmtk_data->isopkt_skb;
> > +
> > + while (count) {
> > + int len;
> > +
> > + if (!skb) {
> > + skb = bt_skb_alloc(HCI_MAX_ISO_SIZE,
> GFP_ATOMIC);
> > + if (!skb) {
> > + err = -ENOMEM;
> > + break;
> > + }
> > +
> > + hci_skb_pkt_type(skb) = HCI_ISODATA_PKT;
> > + hci_skb_expect(skb) = HCI_ISO_HDR_SIZE;
> > + }
> > +
> > + len = min_t(uint, hci_skb_expect(skb), count);
> > + skb_put_data(skb, buffer, len);
> > +
> > + count -= len;
> > + buffer += len;
> > + hci_skb_expect(skb) -= len;
> > +
> > + if (skb->len == HCI_ISO_HDR_SIZE) {
> > + __le16 dlen = ((struct hci_iso_hdr *)skb-
> >data)->dlen;
> > +
> > + /* Complete ISO header */
> > + hci_skb_expect(skb) = __le16_to_cpu(dlen);
> > +
> > + if (skb_tailroom(skb) <
> hci_skb_expect(skb)) {
> > + kfree_skb(skb);
> > + skb = NULL;
> > +
> > + err = -EILSEQ;
> > + break;
> > + }
> > + }
> > +
> > + if (!hci_skb_expect(skb)) {
> > + /* Complete frame */
> > + hci_recv_frame(hdev, skb);
> > + skb = NULL;
> > + }
> > + }
> > +
> > + btmtk_data->isopkt_skb = skb;
> > + spin_unlock_irqrestore(&btmtk_data->isorxlock, flags);
> > +
> > + return err;
> > +}
> > +
> > +static void btmtk_intr_complete(struct urb *urb)
> > +{
> > + struct hci_dev *hdev = urb->context;
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > + int err;
> > +
> > + BT_DBG("%s urb %p status %d count %d", hdev->name, urb,
> urb->status,
> > + urb->actual_length);
> > +
> > + if (!test_bit(HCI_RUNNING, &hdev->flags))
> > + return;
> > +
> > + if (hdev->suspended)
> > + return;
> > +
> > + if (urb->status == 0) {
> > + hdev->stat.byte_rx += urb->actual_length;
> > +
> > + if (btmtk_recv_isopkt(hdev, urb->transfer_buffer,
> > + urb->actual_length) < 0) {
> > + bt_dev_err(hdev, "corrupted iso packet");
> > + hdev->stat.err_rx++;
> > + }
> > + } else if (urb->status == -ENOENT) {
> > + /* Avoid suspend failed when usb_kill_urb */
> > + return;
> > + }
> > +
> > + usb_mark_last_busy(btmtk_data->udev);
> > + usb_anchor_urb(urb, &btmtk_data->isopkt_anchor);
> > +
> > + err = usb_submit_urb(urb, GFP_ATOMIC);
> > + if (err < 0) {
> > + /* -EPERM: urb is being killed;
> > + * -ENODEV: device got disconnected
> > + */
> > + if (err != -EPERM && err != -ENODEV)
> > + bt_dev_err(hdev, "urb %p failed to resubmit
> (%d)",
> > + urb, -err);
> > + if (err != -EPERM)
> > + hci_cmd_sync_cancel(hdev, -err);
> > + usb_unanchor_urb(urb);
> > + }
> > +}
> > +
> > +static int btmtk_submit_intr_urb(struct hci_dev *hdev, gfp_t
> mem_flags)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > + unsigned char *buf;
> > + unsigned int pipe;
> > + struct urb *urb;
> > + int err, size;
> > +
> > + BT_DBG("%s", hdev->name);
> > +
> > + if (!btmtk_data->isopkt_rx_ep)
> > + return -ENODEV;
> > +
> > + urb = usb_alloc_urb(0, mem_flags);
> > + if (!urb)
> > + return -ENOMEM;
> > + size = le16_to_cpu(btmtk_data->isopkt_rx_ep-
> >wMaxPacketSize);
> > +
> > + buf = kmalloc(size, mem_flags);
> > + if (!buf) {
> > + usb_free_urb(urb);
> > + return -ENOMEM;
> > + }
> > +
> > + pipe = usb_rcvintpipe(btmtk_data->udev,
> > + btmtk_data->isopkt_rx_ep-
> >bEndpointAddress);
> > +
> > + usb_fill_int_urb(urb, btmtk_data->udev, pipe, buf, size,
> > + btmtk_intr_complete, hdev,
> > + btmtk_data->isopkt_rx_ep->bInterval);
> > +
> > + urb->transfer_flags |= URB_FREE_BUFFER;
> > +
> > + usb_mark_last_busy(btmtk_data->udev);
> > + usb_anchor_urb(urb, &btmtk_data->isopkt_anchor);
> > +
> > + err = usb_submit_urb(urb, mem_flags);
> > + if (err < 0) {
> > + if (err != -EPERM && err != -ENODEV)
> > + bt_dev_err(hdev, "urb %p submission failed
> (%d)",
> > + urb, -err);
> > + usb_unanchor_urb(urb);
> > + }
> > +
> > + usb_free_urb(urb);
> > +
> > + return err;
> > +}
> > +
> > +static int btmtk_usb_isointf_init(struct hci_dev *hdev)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > + u8 iso_param[2] = { 0x08, 0x01 };
> > + struct sk_buff *skb;
> > + int err;
> > +
> > + init_usb_anchor(&btmtk_data->isopkt_anchor);
> > + spin_lock_init(&btmtk_data->isorxlock);
> > +
> > + __set_mtk_intr_interface(hdev);
> > +
> > + err = btmtk_submit_intr_urb(hdev, GFP_KERNEL);
> > + if (err < 0) {
> > + btmtk_usb_isopkt_stop(hdev);
> > + bt_dev_err(hdev, "ISO intf not support (%d)", err);
> > + return err;
> > + }
> > +
> > + skb = __hci_cmd_sync(hdev, 0xfd98, sizeof(iso_param),
> iso_param,
> > + HCI_INIT_TIMEOUT);
> > + if (IS_ERR(skb)) {
> > + bt_dev_err(hdev, "Failed to apply iso setting
> (%ld)", PTR_ERR(skb));
> > + return PTR_ERR(skb);
> > + }
> > + kfree_skb(skb);
> > +
> > + return 0;
> > +}
> > +
> > +int btmtk_usb_isopkt_start(struct hci_dev *hdev)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > +
> > + if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags)) {
> > + if (btmtk_submit_intr_urb(hdev, GFP_NOIO) < 0)
> > + clear_bit(BTMTK_ISOPKT_RUNNING,
> &btmtk_data->flags);
> > + }
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(btmtk_usb_isopkt_start);
> > +
> > +int btmtk_usb_isopkt_stop(struct hci_dev *hdev)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > +
> > + usb_kill_anchored_urbs(&btmtk_data->isopkt_anchor);
> > +
> > + return 0;
> > +}
> > +EXPORT_SYMBOL_GPL(btmtk_usb_isopkt_stop);
> > +
> > int btmtk_usb_setup(struct hci_dev *hdev)
> > {
> > struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > @@ -1064,6 +1361,12 @@ int btmtk_usb_setup(struct hci_dev *hdev)
> > hci_set_msft_opcode(hdev, 0xFD30);
> > hci_set_aosp_capable(hdev);
> >
> > + /* Set up ISO interface after protocol enabled */
> > + if (test_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data-
> >flags)) {
> > + if (!btmtk_usb_isointf_init(hdev))
> > + set_bit(BTMTK_ISOPKT_RUNNING,
> &btmtk_data->flags);
> > + }
> > +
> > goto done;
> > default:
> > bt_dev_err(hdev, "Unsupported hardware variant
> (%08x)",
> > diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
> > index 47193b867b9f..b88b599018fa 100644
> > --- a/drivers/bluetooth/btmtk.h
> > +++ b/drivers/bluetooth/btmtk.h
> > @@ -40,6 +40,9 @@
> > #define MTK_BT_RESET_REG_CONNV3 0x70028610
> > #define MTK_BT_READ_DEV_ID 0x70010200
> >
> > +/* MediaTek ISO Interface */
> > +#define MTK_ISO_IFNUM 2
> > +
> > enum {
> > BTMTK_WMT_PATCH_DWNLD = 0x1,
> > BTMTK_WMT_TEST = 0x2,
> > @@ -142,6 +145,8 @@ enum {
> > BTMTK_TX_WAIT_VND_EVT,
> > BTMTK_FIRMWARE_LOADED,
> > BTMTK_HW_RESET_ACTIVE,
> > + BTMTK_ISOPKT_OVER_INTR,
> > + BTMTK_ISOPKT_RUNNING,
> > };
> >
> > typedef int (*btmtk_reset_sync_func_t)(struct hci_dev *, void *);
> > @@ -164,6 +169,14 @@ struct btmtk_data {
> > struct usb_interface *intf;
> > struct usb_anchor *ctrl_anchor;
> > struct sk_buff *evt_skb;
> > + struct usb_endpoint_descriptor *isopkt_tx_ep;
> > + struct usb_endpoint_descriptor *isopkt_rx_ep;
> > + struct usb_interface *isopkt_intf;
> > + struct usb_anchor isopkt_anchor;
> > + struct sk_buff *isopkt_skb;
> > +
> > + /* spinlock for ISO data transmission */
> > + spinlock_t isorxlock;
> > };
> >
> > typedef int (*wmt_cmd_sync_func_t)(struct hci_dev *,
> > @@ -193,6 +206,13 @@ int btmtk_usb_subsys_reset(struct hci_dev
> *hdev, u32 dev_id);
> >
> > int btmtk_usb_recv_acl(struct hci_dev *hdev, struct sk_buff *skb);
> >
> > +struct urb *alloc_mtk_intr_urb(struct hci_dev *hdev, struct
> sk_buff *skb,
> > + usb_complete_t tx_complete);
> > +
> > +int btmtk_usb_isopkt_start(struct hci_dev *hdev);
> > +
> > +int btmtk_usb_isopkt_stop(struct hci_dev *hdev);
> > +
> > int btmtk_usb_setup(struct hci_dev *hdev);
> >
> > int btmtk_usb_shutdown(struct hci_dev *hdev);
> > @@ -246,6 +266,22 @@ static int btmtk_usb_recv_acl(struct hci_dev
> *hdev, struct sk_buff *skb)
> > return -EOPNOTSUPP;
> > }
> >
> > +static struct urb *alloc_mtk_intr_urb(struct hci_dev *hdev, struct
> sk_buff *skb,
> > + usb_complete_t tx_complete)
> > +{
> > + return ERR_PTR(-EOPNOTSUPP);
> > +}
> > +
> > +static int btmtk_usb_isopkt_start(struct hci_dev *hdev)
> > +{
> > + return -EOPNOTSUPP;
> > +}
> > +
> > +static int btmtk_usb_isopkt_stop(struct hci_dev *hdev)
> > +{
> > + return -EOPNOTSUPP;
> > +}
> > +
> > static int btmtk_usb_setup(struct hci_dev *hdev)
> > {
> > return -EOPNOTSUPP;
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index 5de50c835964..590602dce3f8 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -2641,6 +2641,40 @@ static int btusb_recv_event_realtek(struct
> hci_dev *hdev, struct sk_buff *skb)
> > return hci_recv_frame(hdev, skb);
> > }
> >
> > +static void btusb_mtk_claim_iso_intf(struct btusb_data *data)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(data->hdev);
> > + int err;
> > +
> > + err = usb_driver_claim_interface(&btusb_driver,
> > + btmtk_data->isopkt_intf,
> data);
> > + if (err < 0) {
> > + btmtk_data->isopkt_intf = NULL;
> > + bt_dev_err(data->hdev, "Failed to claim iso
> interface");
> > + return;
> > + }
> > +
> > + set_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data->flags);
> > +}
> > +
> > +static void btusb_mtk_release_iso_intf(struct btusb_data *data)
> > +{
> > + struct btmtk_data *btmtk_data = hci_get_priv(data->hdev);
> > +
> > + if (btmtk_data->isopkt_intf) {
> > + btmtk_usb_isopkt_stop(data->hdev);
> > + clear_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data-
> >flags);
> > +
> > + dev_kfree_skb_irq(btmtk_data->isopkt_skb);
> > + btmtk_data->isopkt_skb = NULL;
> > + usb_set_intfdata(btmtk_data->isopkt_intf, NULL);
> > + usb_driver_release_interface(&btusb_driver,
> > + btmtk_data-
> >isopkt_intf);
> > + }
> > +
> > + clear_bit(BTMTK_ISOPKT_OVER_INTR, &btmtk_data->flags);
> > +}
> > +
> > static int btusb_mtk_reset(struct hci_dev *hdev, void *rst_data)
> > {
> > struct btusb_data *data = hci_get_drvdata(hdev);
> > @@ -2657,6 +2691,9 @@ static int btusb_mtk_reset(struct hci_dev
> *hdev, void *rst_data)
> > if (err < 0)
> > return err;
> >
> > + if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags))
> > + btusb_mtk_release_iso_intf(data);
> > +
> > btusb_stop_traffic(data);
> > usb_kill_anchored_urbs(&data->tx_anchor);
> >
> > @@ -2668,6 +2705,23 @@ static int btusb_mtk_reset(struct hci_dev
> *hdev, void *rst_data)
> > return err;
> > }
> >
> > +static int btusb_send_frame_mtk(struct hci_dev *hdev, struct
> sk_buff *skb)
> > +{
> > + struct urb *urb;
> > +
> > + BT_DBG("%s", hdev->name);
> > +
> > + if (hci_skb_pkt_type(skb) == HCI_ISODATA_PKT) {
> > + urb = alloc_mtk_intr_urb(hdev, skb,
> btusb_tx_complete);
> > + if (IS_ERR(urb))
> > + return PTR_ERR(urb);
> > +
> > + return submit_or_queue_tx_urb(hdev, urb);
> > + } else {
> > + return btusb_send_frame(hdev, skb);
> > + }
> > +}
> > +
> > static int btusb_mtk_setup(struct hci_dev *hdev)
> > {
> > struct btusb_data *data = hci_get_drvdata(hdev);
> > @@ -2682,11 +2736,22 @@ static int btusb_mtk_setup(struct hci_dev
> *hdev)
> > btmtk_data->ctrl_anchor = &data->ctrl_anchor;
> > btmtk_data->reset_sync = btusb_mtk_reset;
> >
> > + /* Claim ISO data interface and endpoint */
> > + btmtk_data->isopkt_intf = usb_ifnum_to_if(data->udev,
> MTK_ISO_IFNUM);
> > + if (btmtk_data->isopkt_intf)
> > + btusb_mtk_claim_iso_intf(data);
> > +
> > return btmtk_usb_setup(hdev);
> > }
> >
> > static int btusb_mtk_shutdown(struct hci_dev *hdev)
> > {
> > + struct btusb_data *data = hci_get_drvdata(hdev);
> > + struct btmtk_data *btmtk_data = hci_get_priv(hdev);
> > +
> > + if (test_bit(BTMTK_ISOPKT_RUNNING, &btmtk_data->flags))
> > + btusb_mtk_release_iso_intf(data);
> > +
> > return btmtk_usb_shutdown(hdev);
> > }
> >
> > @@ -3793,9 +3858,12 @@ static int btusb_probe(struct usb_interface
> *intf,
> > hdev->manufacturer = 70;
> > hdev->cmd_timeout = btmtk_reset_sync;
> > hdev->set_bdaddr = btmtk_set_bdaddr;
> > + hdev->send = btusb_send_frame_mtk;
> > set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN,
> &hdev->quirks);
> > set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev-
> >quirks);
> > data->recv_acl = btmtk_usb_recv_acl;
> > + data->suspend = btmtk_usb_isopkt_stop;
> > + data->resume = btmtk_usb_isopkt_start;
>
> Small nitpick, although it is just cleaning up the iso endpoint the
> suspend and resume shall probably be named more generically, e.g:
> btmtk_usb_suspend, etc, so later if you need to add more code we
> don't
> need to rename the function names.
>
Thanks for your suggestion. Indeed, change a naming will get a better
scalability in the future if there is another action need to be added
during suspend and resume. I'll review the function naming again and
add some comment to ensure our member can understand these section.
Thanks,
Chris Lu
> > }
> >
> > if (id->driver_info & BTUSB_SWAVE) {
> > --
> > 2.18.0
> >
>
>
> --
> Luiz Augusto von Dentz
Powered by blists - more mailing lists