linux-kernel - Re: [PATCH] ASoC: fsl_xcvr: Improve suspend/resume flow in fsl_xcvr

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAA+D8APvL_wo_L62M-LD88B9EZ6Sg89jtJrCkt4vuCuH3q9p4A@mail.gmail.com>
Date: Wed, 3 Jul 2024 17:12:38 +0800
From: Shengjiu Wang <shengjiu.wang@...il.com>
To: Chancel Liu <chancel.liu@....com>
Cc: Xiubo.Lee@...il.com, festevam@...il.com, nicoleotsuka@...il.com, 
	lgirdwood@...il.com, broonie@...nel.org, perex@...ex.cz, tiwai@...e.com, 
	alsa-devel@...a-project.org, linuxppc-dev@...ts.ozlabs.org, 
	linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ASoC: fsl_xcvr: Improve suspend/resume flow in fsl_xcvr_trigger()

On Fri, Jun 28, 2024 at 5:44 PM Chancel Liu <chancel.liu@....com> wrote:
>
> In the current flow all interrupts are disabled in runtime suspend
> phase. However interrupts enablement only exists in fsl_xcvr_prepare().
> After resume fsl_xcvr_prepare() may not be called so it will cause all
> interrupts still disabled even if resume from suspend. Interrupts
> should be explictily enabled after resume.
>
> Also, DPATH reset setting only exists in fsl_xcvr_prepare(). After
> resume from suspend DPATH should be reset otherwise there'll be channel
> swap issue.
>
> Signed-off-by: Chancel Liu <chancel.liu@....com>

Acked-by: Shengjiu Wang <shengjiu.wang@...il.com>

Best regards
Shengjiu Wang
> ---
>  sound/soc/fsl/fsl_xcvr.c | 43 +++++++++++++++++++++-------------------
>  1 file changed, 23 insertions(+), 20 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_xcvr.c b/sound/soc/fsl/fsl_xcvr.c
> index 337da46a2f90..bf9a4e90978e 100644
> --- a/sound/soc/fsl/fsl_xcvr.c
> +++ b/sound/soc/fsl/fsl_xcvr.c
> @@ -529,16 +529,6 @@ static int fsl_xcvr_prepare(struct snd_pcm_substream *substream,
>                 break;
>         }
>
> -       ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0,
> -                                FSL_XCVR_IRQ_EARC_ALL, FSL_XCVR_IRQ_EARC_ALL);
> -       if (ret < 0) {
> -               dev_err(dai->dev, "Error while setting IER0: %d\n", ret);
> -               return ret;
> -       }
> -
> -       /* set DPATH RESET */
> -       m_ctl |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx);
> -       v_ctl |= FSL_XCVR_EXT_CTRL_DPTH_RESET(tx);
>         ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL, m_ctl, v_ctl);
>         if (ret < 0) {
>                 dev_err(dai->dev, "Error while setting EXT_CTRL: %d\n", ret);
> @@ -679,6 +669,15 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
>         case SNDRV_PCM_TRIGGER_START:
>         case SNDRV_PCM_TRIGGER_RESUME:
>         case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> +               /* set DPATH RESET */
> +               ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL,
> +                                        FSL_XCVR_EXT_CTRL_DPTH_RESET(tx),
> +                                        FSL_XCVR_EXT_CTRL_DPTH_RESET(tx));
> +               if (ret < 0) {
> +                       dev_err(dai->dev, "Failed to set DPATH RESET: %d\n", ret);
> +                       return ret;
> +               }
> +
>                 if (tx) {
>                         switch (xcvr->mode) {
>                         case FSL_XCVR_MODE_EARC:
> @@ -711,6 +710,13 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
>                         return ret;
>                 }
>
> +               ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0,
> +                                        FSL_XCVR_IRQ_EARC_ALL, FSL_XCVR_IRQ_EARC_ALL);
> +               if (ret < 0) {
> +                       dev_err(dai->dev, "Error while setting IER0: %d\n", ret);
> +                       return ret;
> +               }
> +
>                 /* clear DPATH RESET */
>                 ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL,
>                                          FSL_XCVR_EXT_CTRL_DPTH_RESET(tx),
> @@ -733,6 +739,13 @@ static int fsl_xcvr_trigger(struct snd_pcm_substream *substream, int cmd,
>                         return ret;
>                 }
>
> +               ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0,
> +                                        FSL_XCVR_IRQ_EARC_ALL, 0);
> +               if (ret < 0) {
> +                       dev_err(dai->dev, "Failed to clear IER0: %d\n", ret);
> +                       return ret;
> +               }
> +
>                 if (tx) {
>                         switch (xcvr->mode) {
>                         case FSL_XCVR_MODE_SPDIF:
> @@ -1411,16 +1424,6 @@ static int fsl_xcvr_runtime_suspend(struct device *dev)
>         struct fsl_xcvr *xcvr = dev_get_drvdata(dev);
>         int ret;
>
> -       /*
> -        * Clear interrupts, when streams starts or resumes after
> -        * suspend, interrupts are enabled in prepare(), so no need
> -        * to enable interrupts in resume().
> -        */
> -       ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_IER0,
> -                                FSL_XCVR_IRQ_EARC_ALL, 0);
> -       if (ret < 0)
> -               dev_err(dev, "Failed to clear IER0: %d\n", ret);
> -
>         if (!xcvr->soc_data->spdif_only) {
>                 /* Assert M0+ reset */
>                 ret = regmap_update_bits(xcvr->regmap, FSL_XCVR_EXT_CTRL,
> --
> 2.43.0
>