[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2ed1b75e1eb470c9d4d85ff1485c5461d7ec9384.camel@gmail.com>
Date: Thu, 04 Jul 2024 13:13:04 +0200
From: Nuno Sá <noname.nuno@...il.com>
To: utsav.agarwal@...log.com, Michael Hennerich
<michael.hennerich@...log.com>, Dmitry Torokhov
<dmitry.torokhov@...il.com>, Rob Herring <robh@...nel.org>, Krzysztof
Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Nuno
Sá <nuno.sa@...log.com>
Cc: linux-input@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Arturs Artamonovs
<arturs.artamonovs@...log.com>, Vasileios Bimpikas
<vasileios.bimpikas@...log.com>, Oliver Gaskell <oliver.gaskell@...log.com>
Subject: Re: [PATCH v6 3/3] dt-bindings: input: Update dtbinding for adp5588
On Thu, 2024-07-04 at 11:45 +0100, Utsav Agarwal via B4 Relay wrote:
> From: Utsav Agarwal <utsav.agarwal@...log.com>
>
> Updating dt bindings for adp5588. Since the device can now function in a
> purely gpio mode, the following keypad specific properties are now made
> optional:
> - interrupts
> - keypad,num-rows
> - keypad,num-columns
> - linux,keymap
>
> However the above properties are required to be specified when
> configuring the device as a keypad, dependencies have been added
> such that specifying either one would require the remaining as well.
>
> Note that interrupts are optional, but required when the device has been
> configured in keypad mode.
>
> Signed-off-by: Utsav Agarwal <utsav.agarwal@...log.com>
> ---
> .../devicetree/bindings/input/adi,adp5588.yaml | 46 +++++++++++++++++++--
> -
> 1 file changed, 41 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> index 26ea66834ae2..83d1fe19e300 100644
> --- a/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> +++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
> @@ -49,7 +49,10 @@ properties:
> interrupt-controller:
> description:
> This property applies if either keypad,num-rows lower than 8 or
> - keypad,num-columns lower than 10.
> + keypad,num-columns lower than 10. This property is optional if
> + keypad,num-rows or keypad,num-columns are not specified since the
> + device then acts as gpio only, during which interrupts may or may
> + not be utilized.
>
> '#interrupt-cells':
> const: 2
> @@ -65,13 +68,28 @@ properties:
> minItems: 1
> maxItems: 2
>
> +
> +dependencies:
> + keypad,num-rows:
> + - linux,keymap
> + - keypad,num-columns
> + keypad,num-columns:
> + - linux,keymap
> + - keypad,num-rows
> + linux,keymap:
> + - keypad,num-rows
> + - keypad,num-columns
The above seems pretty generic. Maybe it could be moved into matrix-keymap.yaml
at some point...
- Nuno Sá
Powered by blists - more mailing lists