| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <218d45a8-4c3d-453b-aded-d232c366da2c@linaro.org>
Date: Thu, 4 Jul 2024 14:49:37 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>,
Linux PM <linux-pm@...r.kernel.org>
Cc: LKML <linux-kernel@...r.kernel.org>, Lukasz Luba <lukasz.luba@....com>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
Zhang Rui <rui.zhang@...el.com>, Neil Armstrong <neil.armstrong@...aro.org>
Subject: Re: [PATCH v3] thermal: core: Call monitor_thermal_zone() if zone
temperature is invalid
On 04/07/2024 13:46, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
>
> Commit 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip()
> if zone temperature is invalid") caused __thermal_zone_device_update()
> to return early if the current thermal zone temperature was invalid.
>
> This was done to avoid running handle_thermal_trip() and governor
> callbacks in that case which led to confusion. However, it went too
> far because monitor_thermal_zone() still needs to be called even when
> the zone temperature is invalid to ensure that it will be updated
> eventually in case thermal polling is enabled and the driver has no
> other means to notify the core of zone temperature changes (for example,
> it does not register an interrupt handler or ACPI notifier).
>
> Also if the .set_trips() zone callback is expected to set up monitoring
> interrupts for a thermal zone, it needs to be provided with valid
> boundaries and that can only be done if the zone temperature is known.
>
> Accordingly, to ensure that __thermal_zone_device_update() will
> run again after a failing zone temperature check, make it call
> monitor_thermal_zone() regardless of whether or not the zone
> temperature is valid and make the latter schedule a thermal zone
> temperature update if the zone temperature is invalid even if
> polling is not enabled for the thermal zone (however, if this
> continues to fail, give up after some time).
Rafael,
do we agree that we should fix somehow the current issue in this way
because we are close to the merge window, but the proper fix is not
doing that ?
> Fixes: 202aa0d4bb53 ("thermal: core: Do not call handle_thermal_trip() if zone temperature is invalid")
> Reported-by: Daniel Lezcano <daniel.lezcano@...aro.org>
> Link: https://lore.kernel.org/linux-pm/dc1e6cba-352b-4c78-93b5-94dd033fca16@linaro.org
> Link: https://lore.kernel.org/linux-pm/2764814.mvXUDI8C0e@rjwysocki.net
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> ---
> drivers/thermal/thermal_core.c | 13 ++++++++++++-
> drivers/thermal/thermal_core.h | 9 +++++++++
> 2 files changed, 21 insertions(+), 1 deletion(-)
>
> Index: linux-pm/drivers/thermal/thermal_core.c
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_core.c
> +++ linux-pm/drivers/thermal/thermal_core.c
> @@ -300,6 +300,14 @@ static void monitor_thermal_zone(struct
> thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
> else if (tz->polling_delay_jiffies)
> thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
> + else if (tz->temperature == THERMAL_TEMP_INVALID &&
> + tz->recheck_delay_jiffies <= THERMAL_MAX_RECHECK_DELAY) {
> + thermal_zone_device_set_polling(tz, tz->recheck_delay_jiffies);
> + /* Double the recheck delay for the next attempt. */
> + tz->recheck_delay_jiffies += tz->recheck_delay_jiffies;
> + if (tz->recheck_delay_jiffies > THERMAL_MAX_RECHECK_DELAY)
> + dev_info(&tz->device, "Temperature unknown, giving up\n");
> + }
> }
>
> static struct thermal_governor *thermal_get_tz_governor(struct thermal_zone_device *tz)
> @@ -430,6 +438,7 @@ static void update_temperature(struct th
>
> tz->last_temperature = tz->temperature;
> tz->temperature = temp;
> + tz->recheck_delay_jiffies = 1;
>
> trace_thermal_temperature(tz);
>
> @@ -514,7 +523,7 @@ void __thermal_zone_device_update(struct
> update_temperature(tz);
>
> if (tz->temperature == THERMAL_TEMP_INVALID)
> - return;
> + goto monitor;
>
> tz->notify_event = event;
>
> @@ -536,6 +545,7 @@ void __thermal_zone_device_update(struct
>
> thermal_debug_update_trip_stats(tz);
>
> +monitor:
> monitor_thermal_zone(tz);
> }
>
> @@ -1438,6 +1448,7 @@ thermal_zone_device_register_with_trips(
>
> thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
> thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
> + tz->recheck_delay_jiffies = 1;
>
> /* sys I/F */
> /* Add nodes that are always present via .groups */
> Index: linux-pm/drivers/thermal/thermal_core.h
> ===================================================================
> --- linux-pm.orig/drivers/thermal/thermal_core.h
> +++ linux-pm/drivers/thermal/thermal_core.h
> @@ -67,6 +67,8 @@ struct thermal_governor {
> * @polling_delay_jiffies: number of jiffies to wait between polls when
> * checking whether trip points have been crossed (0 for
> * interrupt driven systems)
> + * @recheck_delay_jiffies: delay after a failed thermal zone temperature check
> + * before attempting to check it again
> * @temperature: current temperature. This is only for core code,
> * drivers should use thermal_zone_get_temp() to get the
> * current temperature
> @@ -108,6 +110,7 @@ struct thermal_zone_device {
> int num_trips;
> unsigned long passive_delay_jiffies;
> unsigned long polling_delay_jiffies;
> + unsigned long recheck_delay_jiffies;
> int temperature;
> int last_temperature;
> int emul_temperature;
> @@ -133,6 +136,12 @@ struct thermal_zone_device {
> struct thermal_trip_desc trips[] __counted_by(num_trips);
> };
>
> +/*
> + * Maximum delay after a failing thermal zone temperature check before
> + * attempting to check it again (in jiffies).
> + */
> +#define THERMAL_MAX_RECHECK_DELAY (30 * HZ)
> +
> /* Default Thermal Governor */
> #if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
> #define DEFAULT_THERMAL_GOVERNOR "step_wise"
>
>
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Powered by blists - more mailing lists