lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240704-add-mtk-isp-3-0-support-v5-5-bfccccc5ec21@baylibre.com>
Date: Thu, 04 Jul 2024 15:36:44 +0200
From: Julien Stephan <jstephan@...libre.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>, 
 Andy Hsieh <andy.hsieh@...iatek.com>, 
 Mauro Carvalho Chehab <mchehab@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, 
 Matthias Brugger <matthias.bgg@...il.com>, 
 AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: linux-media@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 linux-mediatek@...ts.infradead.org, Julien Stephan <jstephan@...libre.com>
Subject: [PATCH v5 5/5] arm64: dts: mediatek: mt8365: Add support for
 camera

Add base support for cameras for mt8365 platforms. This requires nodes
for the sensor interface, camsv, and CSI receivers.

Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Signed-off-by: Julien Stephan <jstephan@...libre.com>
---
 arch/arm64/boot/dts/mediatek/mt8365.dtsi | 125 +++++++++++++++++++++++++++++++
 1 file changed, 125 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 24581f7410aa..cabdb51f4041 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/power/mediatek,mt8365-power.h>
+#include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
 
 / {
 	compatible = "mediatek,mt8365";
@@ -703,6 +704,23 @@ ethernet: ethernet@...a0000 {
 			status = "disabled";
 		};
 
+		mipi_csi0: mipi-csi0@...10000 {
+			compatible = "mediatek,mt8365-csi-rx";
+			reg = <0 0x11c10000 0 0x2000>;
+			status = "disabled";
+			num-lanes = <4>;
+			#phy-cells = <1>;
+		};
+
+		mipi_csi1: mipi-csi1@...12000 {
+			compatible = "mediatek,mt8365-csi-rx";
+			reg = <0 0x11c12000 0 0x2000>;
+			phy-type = <PHY_TYPE_DPHY>;
+			status = "disabled";
+			num-lanes = <4>;
+			#phy-cells = <0>;
+		};
+
 		u3phy: t-phy@...c0000 {
 			compatible = "mediatek,mt8365-tphy", "mediatek,generic-tphy-v2";
 			#address-cells = <1>;
@@ -773,6 +791,113 @@ larb2: larb@...01000 {
 			mediatek,larb-id = <2>;
 		};
 
+		seninf: seninf@...40000 {
+			compatible = "mediatek,mt8365-seninf";
+			reg = <0 0x15040000 0 0x6000>;
+			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&camsys CLK_CAM_SENIF>,
+				 <&topckgen CLK_TOP_SENIF_SEL>;
+			clock-names = "camsys", "top_mux";
+
+			power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+
+			phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
+			phy-names = "csi0", "csi1";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+					seninf_camsv1_endpoint: endpoint {
+						remote-endpoint =
+							<&camsv1_endpoint>;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					seninf_camsv2_endpoint: endpoint {
+						remote-endpoint =
+							<&camsv2_endpoint>;
+					};
+				};
+			};
+		};
+
+		camsv1: camsv@...50000 {
+			compatible = "mediatek,mt8365-camsv";
+			reg = <0 0x15050000 0 0x0040>,
+			      <0 0x15050208 0 0x0020>,
+			      <0 0x15050400 0 0x0100>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&camsys CLK_CAM>,
+				 <&camsys CLK_CAMTG>,
+				 <&camsys CLK_CAMSV0>;
+			clock-names = "cam", "camtg", "camsv";
+			iommus = <&iommu M4U_PORT_CAM_IMGO>;
+			mediatek,larb = <&larb2>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					camsv1_endpoint: endpoint {
+						remote-endpoint = <&seninf_camsv1_endpoint>;
+					};
+				};
+			};
+		};
+
+		camsv2: camsv@...50800 {
+			compatible = "mediatek,mt8365-camsv";
+			reg = <0 0x15050800 0 0x0040>,
+			      <0 0x15050228 0 0x0020>,
+			      <0 0x15050c00 0 0x0100>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&camsys CLK_CAM>,
+				 <&camsys CLK_CAMTG>,
+				 <&camsys CLK_CAMSV1>;
+			clock-names = "cam", "camtg", "camsv";
+			iommus = <&iommu M4U_PORT_CAM_IMGO>;
+			mediatek,larb = <&larb2>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					camsv2_endpoint: endpoint {
+						remote-endpoint = <&seninf_camsv2_endpoint>;
+					};
+				};
+			};
+		};
+
 		vdecsys: syscon@...00000 {
 			compatible = "mediatek,mt8365-vdecsys", "syscon";
 			reg = <0 0x16000000 0 0x1000>;

-- 
2.45.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ