| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<TYZPR06MB656814B0CA324EBF5468C7A9F1DF2@TYZPR06MB6568.apcprd06.prod.outlook.com>
Date: Fri, 5 Jul 2024 08:15:42 +0000
From: Jammy Huang <jammy_huang@...eedtech.com>
To: Paul Menzel <pmenzel@...gen.mpg.de>, Jammy Huang <orbit.huang@...il.com>
CC: "eajames@...ux.ibm.com" <eajames@...ux.ibm.com>, "mchehab@...nel.org"
<mchehab@...nel.org>, "joel@....id.au" <joel@....id.au>, "andrew@...id.au"
<andrew@...id.au>, "linux-media@...r.kernel.org"
<linux-media@...r.kernel.org>, "openbmc@...ts.ozlabs.org"
<openbmc@...ts.ozlabs.org>, "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-aspeed@...ts.ozlabs.org"
<linux-aspeed@...ts.ozlabs.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH] media: aspeed: Add additional input type, GFX, to capture
Hi Paul,
Thanks for your help. I will modify accordingly.
I will list datasheet(not public available) and SDK_User_Guide in the comments for reference.
When the reg, VE_SEQ_CTRL_AUTO_COMP, is enabled, video capture engine and video compression
engine can work together to automatically capture and compress frame. If it is not enabled, you will
need to manually wait until capture done before start compressing.
I move VE_SEQ_CTRL_AUTO_COMP to aspeed_video_init_regs(), since it is always enabled.
Regards,
Jammy Huang
************* Email Confidentiality Notice ********************
DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
> -----Original Message-----
> From: Paul Menzel <pmenzel@...gen.mpg.de>
> Sent: Friday, July 5, 2024 3:10 PM
> To: Jammy Huang <orbit.huang@...il.com>
> Cc: eajames@...ux.ibm.com; mchehab@...nel.org; joel@....id.au;
> andrew@...id.au; linux-media@...r.kernel.org; openbmc@...ts.ozlabs.org;
> linux-arm-kernel@...ts.infradead.org; linux-aspeed@...ts.ozlabs.org;
> linux-kernel@...r.kernel.org; Jammy Huang
> <jammy_huang@...eedtech.com>
> Subject: Re: [PATCH] media: aspeed: Add additional input type, GFX, to capture
>
> Dear Jammy,
>
>
> Thank you for your patch.
>
> If you send from your Google Mail address you should still add your company
> address as the author one, so it matches the Signed-off-by line.
>
> Some minor comments below.
>
> For the summary/title, I’d use:
>
> > media: aspeed: Allow to capture from SoC display (GFX)
>
> Am 04.07.24 um 09:55 schrieb Jammy Huang:
> > ASPEED BMC IC has 2 different display engines.
>
> I’d add a blank line.
>
> > 1. VGA on PCIe
> > 2. SoC Display(GFX)
>
> Please add a space before (.
>
> > By default, video engine(VE) will capture video from VGA. This patch
>
> Ditto.
>
> > adds an option to caputre video from GFX with standard ioctl,
>
> cap*tu*re
>
> > vidioc_s_input.
> >
> > An enum, aspeed_video_input, is added for this purpose.
> > enum aspeed_video_input {
> > VIDEO_INPUT_VGA = 0,
> > VIDEO_INPUT_GFX,
> > VIDEO_INPUT_MAX
> > };
>
> Please add a new paragraph how you tested this and how to test this.
> Maybe also paste the new log lines.
>
> > Signed-off-by: Jammy Huang <jammy_huang@...eedtech.com>
> > ---
> > drivers/media/platform/aspeed/aspeed-video.c | 177
> ++++++++++++++++---
> > include/uapi/linux/aspeed-video.h | 7 +
> > 2 files changed, 158 insertions(+), 26 deletions(-)
> >
> > diff --git a/drivers/media/platform/aspeed/aspeed-video.c
> > b/drivers/media/platform/aspeed/aspeed-video.c
> > index fc6050e3be0d..da5bf512a8ab 100644
> > --- a/drivers/media/platform/aspeed/aspeed-video.c
> > +++ b/drivers/media/platform/aspeed/aspeed-video.c
> > @@ -25,6 +25,8 @@
> > #include <linux/workqueue.h>
> > #include <linux/debugfs.h>
> > #include <linux/ktime.h>
> > +#include <linux/regmap.h>
> > +#include <linux/mfd/syscon.h>
> > #include <media/v4l2-ctrls.h>
> > #include <media/v4l2-dev.h>
> > #include <media/v4l2-device.h>
> > @@ -203,6 +205,25 @@
> > #define VE_MEM_RESTRICT_START 0x310
> > #define VE_MEM_RESTRICT_END 0x314
> >
> > +// SCU's registers
> > +#define SCU_MISC_CTRL 0xC0
> > +#define SCU_DPLL_SOURCE BIT(20)
> > +
> > +// GFX's registers
> > +#define GFX_CTRL 0x60
> > +#define GFX_CTRL_ENABLE BIT(0)
> > +#define GFX_CTRL_FMT GENMASK(9, 7)
> > +
> > +#define GFX_H_DISPLAY 0x70
> > +#define GFX_H_DISPLAY_DE GENMASK(28, 16)
> > +#define GFX_H_DISPLAY_TOTAL GENMASK(12, 0)
> > +
> > +#define GFX_V_DISPLAY 0x78
> > +#define GFX_V_DISPLAY_DE GENMASK(27, 16)
> > +#define GFX_V_DISPLAY_TOTAL GENMASK(11, 0)
> > +
> > +#define GFX_DISPLAY_ADDR 0x80
> > +
>
> Mention the datasheet name and revision in the commit message?
>
> > /*
> > * VIDEO_MODE_DETECT_DONE: a flag raised if signal lock
> > * VIDEO_RES_CHANGE: a flag raised if res_change work
> on-going
> > @@ -273,6 +294,7 @@ struct aspeed_video_perf {
> > * yuv420: a flag raised if JPEG subsampling is 420
> > * format: holds the video format
> > * hq_mode: a flag raised if HQ is enabled. Only for
> VIDEO_FMT_ASPEED
> > + * input: holds the video input
> > * frame_rate: holds the frame_rate
> > * jpeg_quality: holds jpeq's quality (0~11)
> > * jpeg_hq_quality: holds hq's quality (1~12) only if hq_mode
> enabled
> > @@ -298,6 +320,8 @@ struct aspeed_video {
> > struct video_device vdev;
> > struct mutex video_lock; /* v4l2 and videobuf2 lock */
> >
> > + struct regmap *scu;
> > + struct regmap *gfx;
> > u32 jpeg_mode;
> > u32 comp_size_read;
> >
> > @@ -316,6 +340,7 @@ struct aspeed_video {
> > bool yuv420;
> > enum aspeed_video_format format;
> > bool hq_mode;
> > + enum aspeed_video_input input;
> > unsigned int frame_rate;
> > unsigned int jpeg_quality;
> > unsigned int jpeg_hq_quality;
> > @@ -485,6 +510,7 @@ static const struct v4l2_dv_timings_cap
> > aspeed_video_timings_cap = {
> >
> > static const char * const format_str[] = {"Standard JPEG",
> > "Aspeed JPEG"};
> > +static const char * const input_str[] = {"VGA", "BMC GFX"};
> >
> > static unsigned int debug;
> >
> > @@ -609,6 +635,14 @@ static int aspeed_video_start_frame(struct
> aspeed_video *video)
> > aspeed_video_free_buf(video, &video->bcd);
> > }
> >
> > + if (video->input == VIDEO_INPUT_GFX) {
> > + u32 val;
> > +
> > + // update input buffer address as gfx's
> > + regmap_read(video->gfx, GFX_DISPLAY_ADDR, &val);
> > + aspeed_video_write(video, VE_TGS_0, val);
> > + }
> > +
> > spin_lock_irqsave(&video->lock, flags);
> > buf = list_first_entry_or_null(&video->buffers,
> > struct aspeed_video_buffer, link); @@
> -1026,9 +1060,23 @@
> > static void aspeed_video_get_timings(struct aspeed_video *v,
> > }
> > }
> >
> > +static void aspeed_video_get_resolution_gfx(struct aspeed_video *video,
> > + struct v4l2_bt_timings *det) {
> > + u32 h_val, v_val;
> > +
> > + regmap_read(video->gfx, GFX_H_DISPLAY, &h_val);
> > + regmap_read(video->gfx, GFX_V_DISPLAY, &v_val);
> > +
> > + det->width = FIELD_GET(GFX_H_DISPLAY_DE, h_val) + 1;
> > + det->height = FIELD_GET(GFX_V_DISPLAY_DE, v_val) + 1;
> > + video->v4l2_input_status = 0;
> > +}
> > +
> > #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE,
> > &(v)->flags)
> >
> > -static void aspeed_video_get_resolution(struct aspeed_video *video)
> > +static void aspeed_video_get_resolution_vga(struct aspeed_video *video,
> > + struct v4l2_bt_timings *det)
> > {
> > bool invalid_resolution = true;
> > int rc;
> > @@ -1036,7 +1084,6 @@ static void aspeed_video_get_resolution(struct
> aspeed_video *video)
> > u32 mds;
> > u32 src_lr_edge;
> > u32 src_tb_edge;
> > - struct v4l2_bt_timings *det = &video->detected_timings;
> >
> > det->width = MIN_WIDTH;
> > det->height = MIN_HEIGHT;
> > @@ -1113,14 +1160,20 @@ static void aspeed_video_get_resolution(struct
> > aspeed_video *video)
> >
> > aspeed_video_get_timings(video, det);
> >
> > - /*
> > - * Enable mode-detect watchdog, resolution-change watchdog and
> > - * automatic compression after frame capture.
> > - */
> > + /* Enable mode-detect watchdog, resolution-change watchdog */
> > aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
> > VE_INTERRUPT_MODE_DETECT_WD);
> > - aspeed_video_update(video, VE_SEQ_CTRL, 0,
> > - VE_SEQ_CTRL_AUTO_COMP |
> VE_SEQ_CTRL_EN_WATCHDOG);
> > + aspeed_video_update(video, VE_SEQ_CTRL, 0,
> VE_SEQ_CTRL_EN_WATCHDOG);
>
> What happenned with the compression? Please mention this in the commit
> message.
>
> > +}
> > +
> > +static void aspeed_video_get_resolution(struct aspeed_video *video) {
> > + struct v4l2_bt_timings *det = &video->detected_timings;
> > +
> > + if (video->input == VIDEO_INPUT_GFX)
> > + aspeed_video_get_resolution_gfx(video, det);
> > + else
> > + aspeed_video_get_resolution_vga(video, det);
> >
> > v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
> > det->width, det->height);
> > @@ -1156,7 +1209,7 @@ static void aspeed_video_set_resolution(struct
> aspeed_video *video)
> > aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width *
> 4);
> >
> > /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
> > - if (size < DIRECT_FETCH_THRESHOLD) {
> > + if (video->input == VIDEO_INPUT_VGA && size <
> > +DIRECT_FETCH_THRESHOLD) {
> > v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Sync Mode\n");
> > aspeed_video_write(video, VE_TGS_0,
> > FIELD_PREP(VE_TGS_FIRST,
> > @@ -1171,10 +1224,20 @@ static void aspeed_video_set_resolution(struct
> aspeed_video *video)
> > VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
> > VE_CTRL_INT_DE);
> > } else {
> > + u32 ctrl, val, bpp;
> > +
> > v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct
> Mode\n");
> > + ctrl = VE_CTRL_DIRECT_FETCH;
> > + if (video->input == VIDEO_INPUT_GFX) {
> > + regmap_read(video->gfx, GFX_CTRL, &val);
> > + bpp = FIELD_GET(GFX_CTRL_FMT, val) ? 32 : 16;
> > + if (bpp == 16)
> > + ctrl |= VE_CTRL_INT_DE;
> > + aspeed_video_write(video, VE_TGS_1, act->width * (bpp >> 3));
> > + }
> > aspeed_video_update(video, VE_CTRL,
> > VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
> > - VE_CTRL_DIRECT_FETCH);
> > + ctrl);
> > }
> >
> > size *= 4;
> > @@ -1207,6 +1270,22 @@ static void aspeed_video_set_resolution(struct
> aspeed_video *video)
> > aspeed_video_free_buf(video, &video->srcs[0]);
> > }
> >
> > +/*
> > + * Update relative parameters when timing changed.
> > + *
> > + * @video: the struct of aspeed_video
> > + * @timings: the new timings
> > + */
> > +static void aspeed_video_update_timings(struct aspeed_video *video,
> > +struct v4l2_bt_timings *timings) {
> > + video->active_timings = *timings;
> > + aspeed_video_set_resolution(video);
> > +
> > + video->pix_fmt.width = timings->width;
> > + video->pix_fmt.height = timings->height;
> > + video->pix_fmt.sizeimage = video->max_compressed_size; }
> > +
> > static void aspeed_video_update_regs(struct aspeed_video *video)
> > {
> > u8 jpeg_hq_quality = clamp((int)video->jpeg_hq_quality - 1, 0, @@
> > -1219,6 +1298,8 @@ static void aspeed_video_update_regs(struct
> aspeed_video *video)
> > u32 ctrl = 0;
> > u32 seq_ctrl = 0;
> >
> > + v4l2_dbg(1, debug, &video->v4l2_dev, "input(%s)\n",
> > + input_str[video->input]);
> > v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
> > video->frame_rate);
> > v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s)
> > subsample(%s)\n", @@ -1234,6 +1315,9 @@ static void
> aspeed_video_update_regs(struct aspeed_video *video)
> > else
> > aspeed_video_update(video, VE_BCD_CTRL,
> VE_BCD_CTRL_EN_BCD, 0);
> >
> > + if (video->input == VIDEO_INPUT_VGA)
> > + ctrl |= VE_CTRL_AUTO_OR_CURSOR;
> > +
> > if (video->frame_rate)
> > ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
> >
> > @@ -1252,7 +1336,9 @@ static void aspeed_video_update_regs(struct
> aspeed_video *video)
> > aspeed_video_update(video, VE_SEQ_CTRL,
> > video->jpeg_mode | VE_SEQ_CTRL_YUV420,
> > seq_ctrl);
> > - aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
> > + aspeed_video_update(video, VE_CTRL,
> > + VE_CTRL_FRC | VE_CTRL_AUTO_OR_CURSOR |
> > + VE_CTRL_SOURCE, ctrl);
> > aspeed_video_update(video, VE_COMP_CTRL,
> > VE_COMP_CTRL_DCT_LUM |
> VE_COMP_CTRL_DCT_CHR |
> > VE_COMP_CTRL_EN_HQ |
> VE_COMP_CTRL_HQ_DCT_LUM | @@ -1280,6
> > +1366,7 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
> > aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
> >
> > /* Set control registers */
> > + aspeed_video_write(video, VE_SEQ_CTRL, VE_SEQ_CTRL_AUTO_COMP);
> > aspeed_video_write(video, VE_CTRL, ctrl);
> > aspeed_video_write(video, VE_COMP_CTRL,
> VE_COMP_CTRL_RSVD);
> >
> > @@ -1311,12 +1398,7 @@ static void aspeed_video_start(struct
> aspeed_video *video)
> > aspeed_video_get_resolution(video);
> >
> > /* Set timings since the device is being opened for the first time */
> > - video->active_timings = video->detected_timings;
> > - aspeed_video_set_resolution(video);
> > -
> > - video->pix_fmt.width = video->active_timings.width;
> > - video->pix_fmt.height = video->active_timings.height;
> > - video->pix_fmt.sizeimage = video->max_compressed_size;
> > + aspeed_video_update_timings(video, &video->detected_timings);
> > }
> >
> > static void aspeed_video_stop(struct aspeed_video *video) @@
> > -1414,15 +1496,44 @@ static int aspeed_video_enum_input(struct file
> > *file, void *fh,
> >
> > static int aspeed_video_get_input(struct file *file, void *fh, unsigned int
> *i)
> > {
> > - *i = 0;
> > + struct aspeed_video *video = video_drvdata(file);
> > +
> > + *i = video->input;
> >
> > return 0;
> > }
> >
> > static int aspeed_video_set_input(struct file *file, void *fh, unsigned int i)
> > {
> > - if (i)
> > + struct aspeed_video *video = video_drvdata(file);
> > +
> > + if (i >= VIDEO_INPUT_MAX)
> > + return -EINVAL;
> > +
> > + if (IS_ERR(video->scu)) {
> > + v4l2_dbg(1, debug, &video->v4l2_dev, "%s: scu isn't ready for
> input-control\n", __func__);
> > + return -EINVAL;
> > + }
> > +
> > + if (IS_ERR(video->gfx) && i == VIDEO_INPUT_GFX) {
> > + v4l2_dbg(1, debug, &video->v4l2_dev, "%s: gfx isn't ready for GFX
> > +input\n", __func__);
> > return -EINVAL;
> > + }
> > +
> > + video->input = i;
> > +
> > + // modify dpll source per current input
>
> I’d use C89 style comments.
>
> > + if (video->input == VIDEO_INPUT_VGA)
> > + regmap_update_bits(video->scu, SCU_MISC_CTRL,
> SCU_DPLL_SOURCE, 0);
> > + else
> > + regmap_update_bits(video->scu, SCU_MISC_CTRL,
> SCU_DPLL_SOURCE,
> > +SCU_DPLL_SOURCE);
> > +
> > + aspeed_video_update_regs(video);
> > +
> > + // update signal status
> > + aspeed_video_get_resolution(video);
> > + if (!video->v4l2_input_status)
> > + aspeed_video_update_timings(video, &video->detected_timings);
> >
> > return 0;
> > }
> > @@ -1527,13 +1638,7 @@ static int aspeed_video_set_dv_timings(struct
> file *file, void *fh,
> > if (vb2_is_busy(&video->queue))
> > return -EBUSY;
> >
> > - video->active_timings = timings->bt;
> > -
> > - aspeed_video_set_resolution(video);
> > -
> > - video->pix_fmt.width = timings->bt.width;
> > - video->pix_fmt.height = timings->bt.height;
> > - video->pix_fmt.sizeimage = video->max_compressed_size;
> > + aspeed_video_update_timings(video, &timings->bt);
> >
> > timings->type = V4L2_DV_BT_656_1120;
> >
> > @@ -1911,6 +2016,7 @@ static int aspeed_video_debugfs_show(struct
> seq_file *s, void *data)
> > val08 = aspeed_video_read(v, VE_CTRL);
> > if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) {
> > seq_printf(s, " %-20s:\tDirect fetch\n", "Mode");
> > + seq_printf(s, " %-20s:\t%s\n", "Input", input_str[v->input]);
> > seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode",
> > FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32");
> > } else {
> > @@ -2070,12 +2176,31 @@ static int aspeed_video_setup_video(struct
> aspeed_video *video)
> > return 0;
> > }
> >
> > +// Get regmap without checking res, such as clk/reset, that could lead to
> conflict.
> > +static struct regmap *aspeed_regmap_lookup(struct device_node *np,
> > +const char *property) {
> > + struct device_node *syscon_np;
> > + struct regmap *regmap;
> > +
> > + syscon_np = of_parse_phandle(np, property, 0);
> > + if (!syscon_np)
> > + return ERR_PTR(-ENODEV);
> > +
> > + regmap = device_node_to_regmap(syscon_np);
> > + of_node_put(syscon_np);
> > +
> > + return regmap;
> > +}
> > +
> > static int aspeed_video_init(struct aspeed_video *video)
> > {
> > int irq;
> > int rc;
> > struct device *dev = video->dev;
> >
> > + video->scu = aspeed_regmap_lookup(dev->of_node, "aspeed,scu");
> > + video->gfx = aspeed_regmap_lookup(dev->of_node, "aspeed,gfx");
> > +
> > irq = irq_of_parse_and_map(dev->of_node, 0);
> > if (!irq) {
> > dev_err(dev, "Unable to find IRQ\n"); diff --git
> > a/include/uapi/linux/aspeed-video.h
> > b/include/uapi/linux/aspeed-video.h
> > index 6586a65548c4..44173be4c8dd 100644
> > --- a/include/uapi/linux/aspeed-video.h
> > +++ b/include/uapi/linux/aspeed-video.h
> > @@ -8,6 +8,13 @@
> >
> > #include <linux/v4l2-controls.h>
> >
> > +// enum for aspeed video's v4l2 s_input enum aspeed_video_input {
> > + VIDEO_INPUT_VGA = 0,
> > + VIDEO_INPUT_GFX,
> > + VIDEO_INPUT_MAX
> > +};
> > +
> > #define V4L2_CID_ASPEED_HQ_MODE
> (V4L2_CID_USER_ASPEED_BASE + 1)
> > #define V4L2_CID_ASPEED_HQ_JPEG_QUALITY
> (V4L2_CID_USER_ASPEED_BASE + 2)
> >
> >
> > base-commit: e9d22f7a6655941fc8b2b942ed354ec780936b3e
>
>
> Kind regards,
>
> Paul
Powered by blists - more mailing lists