| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240705021520.2737568-10-chris.packham@alliedtelesis.co.nz>
Date: Fri, 5 Jul 2024 14:15:20 +1200
From: Chris Packham <chris.packham@...iedtelesis.co.nz>
To: tglx@...utronix.de,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
tsbogend@...ha.franken.de,
daniel.lezcano@...aro.org,
paulburton@...nel.org,
peterz@...radead.org,
mail@...ger-koblitz.de,
bert@...t.com,
john@...ozen.org,
sander@...nheule.net
Cc: linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
linux-mips@...r.kernel.org,
kabel@...nel.org,
ericwouds@...il.com,
Chris Packham <chris.packham@...iedtelesis.co.nz>
Subject: [PATCH v4 9/9] mips: dts: realtek: Add RTL9302C board
Add support for the RTL9302 SoC and the RTL9302C_2xRTL8224_2XGE
reference board.
The RTL930x family of SoCs are Realtek switches with an embedded MIPS
core (800MHz 34Kc). Most of the peripherals are similar to the RTL838x
SoC and can make use of many existing drivers.
Add in full DSA switch support is still a work in progress.
Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
---
Notes:
Changes in v4:
- None
Changes in v3:
- Use full board name
Changes in v2:
- Use specific compatibles instead of rtl930x
- Remove unnecessary irq flags (interrupt controller is one-cell)
- Remove earlycon
- Name clocks as recommended in dt schema
Changes in v2:
- Use specific compatible for rtl9302-soc
- Fix to allow correct board, soc compatible
This is derrived from openwrt[1],[2]. I've retained the original signoff
and added my own.
[1] https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob_plain;f=target/linux/realtek/files-5.15/drivers/clocksource/timer-rtl-otto.c;hb=HEAD
[2] https://git.openwrt.org/?p=openwrt/openwrt.git;a=blob_plain;f=target/linux/realtek/patches-5.15/302-clocksource-add-otto-driver.patch;hb=HEAD
Changes in v3:
- Remove unnecessary select COMMON_CLK
- Use %p when printing pointer
Changes in v2
- None
Changes in v3:
- Use full board name
Changes in v2:
- Use specific compatibles instead of rtl930x
- Remove unnecessary irq flags (interrupt controller is one-cell)
- Remove earlycon
- Name clocks as recommended in dt schema
arch/mips/boot/dts/realtek/Makefile | 1 +
.../cameo-rtl9302c-2x-rtl8224-2xge.dts | 73 +++++++++++++++++
arch/mips/boot/dts/realtek/rtl930x.dtsi | 79 +++++++++++++++++++
3 files changed, 153 insertions(+)
create mode 100644 arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
create mode 100644 arch/mips/boot/dts/realtek/rtl930x.dtsi
diff --git a/arch/mips/boot/dts/realtek/Makefile b/arch/mips/boot/dts/realtek/Makefile
index fba4e93187a6..d2709798763f 100644
--- a/arch/mips/boot/dts/realtek/Makefile
+++ b/arch/mips/boot/dts/realtek/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
dtb-y += cisco_sg220-26.dtb
+dtb-y += cameo-rtl9302c-2x-rtl8224-2xge.dtb
diff --git a/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
new file mode 100644
index 000000000000..b51e10ae4950
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include "rtl930x.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "cameo,rtl9302c-2x-rtl8224-2xge", "realtek,rtl9302-soc";
+ model = "RTL9302C Development Board";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0xe0000>;
+ read-only;
+ };
+ partition@...00 {
+ label = "u-boot-env";
+ reg = <0xe0000 0x10000>;
+ };
+ partition@...00 {
+ label = "u-boot-env2";
+ reg = <0xf0000 0x10000>;
+ read-only;
+ };
+ partition@...000 {
+ label = "jffs";
+ reg = <0x100000 0x100000>;
+ };
+ partition@...000 {
+ label = "jffs2";
+ reg = <0x200000 0x100000>;
+ };
+ partition@...000 {
+ label = "runtime";
+ reg = <0x300000 0xe80000>;
+ };
+ partition@...0000 {
+ label = "runtime2";
+ reg = <0x1180000 0xe80000>;
+ };
+ };
+ };
+};
diff --git a/arch/mips/boot/dts/realtek/rtl930x.dtsi b/arch/mips/boot/dts/realtek/rtl930x.dtsi
new file mode 100644
index 000000000000..f271940f82be
--- /dev/null
+++ b/arch/mips/boot/dts/realtek/rtl930x.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+
+#include "rtl83xx.dtsi"
+
+/ {
+ compatible = "realtek,rtl9302-soc";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips34Kc";
+ reg = <0>;
+ clocks = <&baseclk 0>;
+ clock-names = "cpu";
+ };
+ };
+
+ baseclk: clock-800mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <800000000>;
+ };
+
+ lx_clk: clock-175mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <175000000>;
+ };
+};
+
+&soc {
+ intc: interrupt-controller@...0 {
+ compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
+ reg = <0x3000 0x18>, <0x3018 0x18>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
+ };
+
+ spi0: spi@...0 {
+ compatible = "realtek,rtl8380-spi";
+ reg = <0x1200 0x100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ timer0: timer@...0 {
+ compatible = "realtek,rtl9302-timer", "realtek,otto-timer";
+ reg = <0x3200 0x10>, <0x3210 0x10>, <0x3220 0x10>,
+ <0x3230 0x10>, <0x3240 0x10>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <7>, <8>, <9>, <10>, <11>;
+ clocks = <&lx_clk>;
+ };
+};
+
+&uart0 {
+ /delete-property/ clock-frequency;
+ clocks = <&lx_clk>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <30>;
+};
+
+&uart1 {
+ /delete-property/ clock-frequency;
+ clocks = <&lx_clk>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <31>;
+};
+
--
2.45.2
Powered by blists - more mailing lists