[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240706102338.99231-4-kikuchan98@gmail.com>
Date: Sat, 6 Jul 2024 19:23:34 +0900
From: Hironori KIKUCHI <kikuchan98@...il.com>
To: linux-kernel@...r.kernel.org
Cc: Hironori KIKUCHI <kikuchan98@...il.com>,
Jagan Teki <jagan@...rulasolutions.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...il.com>,
Daniel Vetter <daniel@...ll.ch>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org
Subject: [PATCH v3 3/5] dt-bindings: display: st7701: Add Anbernic RG28XX panel
The RG28XX panel is a display panel of the Anbernic RG28XX, a handheld
gaming device from Anbernic. It is 2.8 inches in size (diagonally) with
a resolution of 480x640.
This panel is driven by a variant of the ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values, so add a new entry for the panel to distinguish them.
Additionally, the panel only has an SPI instead of MIPI DSI.
So add and modify for SPI as well.
Signed-off-by: Hironori KIKUCHI <kikuchan98@...il.com>
---
.../display/panel/sitronix,st7701.yaml | 69 +++++++++++++++++--
1 file changed, 64 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
index b348f5bf0a9..b07f3eca669 100644
--- a/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
+++ b/Documentation/devicetree/bindings/display/panel/sitronix,st7701.yaml
@@ -20,21 +20,19 @@ description: |
Densitron DMT028VGHMCMI-1A is 480x640, 2-lane MIPI DSI LCD panel
which has built-in ST7701 chip.
-allOf:
- - $ref: panel-common.yaml#
-
properties:
compatible:
items:
- enum:
- anbernic,rg-arc-panel
+ - anbernic,rg28xx-panel
- densitron,dmt028vghmcmi-1a
- elida,kd50t048a
- techstar,ts8550b
- const: sitronix,st7701
reg:
- description: DSI virtual channel used by that screen
+ description: DSI / SPI channel used by that screen
maxItems: 1
VCC-supply:
@@ -43,6 +41,13 @@ properties:
IOVCC-supply:
description: I/O system regulator
+ dc-gpios:
+ maxItems: 1
+ description:
+ Controller data/command selection (D/CX) in 4-line SPI mode.
+ If not set, the controller is in 3-line SPI mode.
+ Disallowed for DSI.
+
port: true
reset-gpios: true
rotation: true
@@ -57,7 +62,38 @@ required:
- port
- reset-gpios
-additionalProperties: false
+allOf:
+ - $ref: panel-common.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ # SPI connected panels
+ enum:
+ - anbernic,rg28xx-panel
+ then:
+ $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ properties:
+ compatible:
+ not:
+ contains:
+ # DSI or SPI without D/CX pin
+ enum:
+ - anbernic,rg-arc-panel
+ - anbernic,rg28xx-panel
+ - densitron,dmt028vghmcmi-1a
+ - elida,kd50t048a
+ - techstar,ts8550b
+ then:
+ required:
+ - dc-gpios
+ else:
+ properties:
+ dc-gpios: false
+
+unevaluatedProperties: false
examples:
- |
@@ -82,3 +118,26 @@ examples:
};
};
};
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel@0 {
+ compatible = "anbernic,rg28xx-panel", "sitronix,st7701";
+ reg = <0>;
+ spi-max-frequency = <3125000>;
+ VCC-supply = <®_lcd>;
+ IOVCC-supply = <®_lcd>;
+ reset-gpios = <&pio 8 14 GPIO_ACTIVE_HIGH>; /* LCD-RST: PI14 */
+ backlight = <&backlight>;
+
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <&tcon_lcd0_out_lcd>;
+ };
+ };
+ };
+ };
--
2.45.2
Powered by blists - more mailing lists