[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240708-icc_bw_voting_from_ethqos-v4-2-c6bc3db86071@quicinc.com>
Date: Mon, 8 Jul 2024 14:30:01 -0700
From: Sagar Cheluvegowda <quic_scheluve@...cinc.com>
To: Vinod Koul <vkoul@...nel.org>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
"David S.
Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
"Jakub
Kicinski" <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin
<mcoquelin.stm32@...il.com>,
Russell King <linux@...linux.org.uk>, "Rob
Herring" <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
"Conor
Dooley" <conor+dt@...nel.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>
CC: <kernel@...cinc.com>, Andrew Halaney <ahalaney@...hat.com>,
Andrew Lunn
<andrew@...n.ch>, <linux-arm-msm@...r.kernel.org>,
<netdev@...r.kernel.org>, <linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>,
Sagar Cheluvegowda <quic_scheluve@...cinc.com>
Subject: [PATCH v4 2/2] net: stmmac: Add interconnect support
Add interconnect support to vote for bus bandwidth based
on the current speed of the driver.
Adds support for two different paths - one from ethernet to
DDR and the other from CPU to ethernet, Vote from each
interconnect client is aggregated and the on-chip interconnect
hardware is configured to the most appropriate bandwidth profile.
Suggested-by: Andrew Halaney <ahalaney@...hat.com>
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@...cinc.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 8 ++++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 ++++++++++++
include/linux/stmmac.h | 2 ++
4 files changed, 23 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index b23b920eedb1..56a282d2b8cd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -21,6 +21,7 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/net_tstamp.h>
#include <linux/reset.h>
+#include <linux/interconnect.h>
#include <net/page_pool/types.h>
#include <net/xdp.h>
#include <uapi/linux/bpf.h>
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index b3afc7cb7d72..ec7c61ee44d4 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -985,6 +985,12 @@ static void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
}
}
+static void stmmac_set_icc_bw(struct stmmac_priv *priv, unsigned int speed)
+{
+ icc_set_bw(priv->plat->axi_icc_path, Mbps_to_icc(speed), Mbps_to_icc(speed));
+ icc_set_bw(priv->plat->ahb_icc_path, Mbps_to_icc(speed), Mbps_to_icc(speed));
+}
+
static void stmmac_mac_link_down(struct phylink_config *config,
unsigned int mode, phy_interface_t interface)
{
@@ -1080,6 +1086,8 @@ static void stmmac_mac_link_up(struct phylink_config *config,
if (priv->plat->fix_mac_speed)
priv->plat->fix_mac_speed(priv->plat->bsp_priv, speed, mode);
+ stmmac_set_icc_bw(priv, speed);
+
if (!duplex)
ctrl &= ~priv->hw->link.duplex;
else
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 54797edc9b38..201f9dea6da9 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -642,6 +642,18 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
dev_dbg(&pdev->dev, "PTP rate %d\n", plat->clk_ptp_rate);
}
+ plat->axi_icc_path = devm_of_icc_get(&pdev->dev, "mac-mem");
+ if (IS_ERR(plat->axi_icc_path)) {
+ ret = ERR_CAST(plat->axi_icc_path);
+ goto error_hw_init;
+ }
+
+ plat->ahb_icc_path = devm_of_icc_get(&pdev->dev, "cpu-mac");
+ if (IS_ERR(plat->ahb_icc_path)) {
+ ret = ERR_CAST(plat->ahb_icc_path);
+ goto error_hw_init;
+ }
+
plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
STMMAC_RESOURCE_NAME);
if (IS_ERR(plat->stmmac_rst)) {
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index f92c195c76ed..385f352a0c23 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -283,6 +283,8 @@ struct plat_stmmacenet_data {
struct reset_control *stmmac_rst;
struct reset_control *stmmac_ahb_rst;
struct stmmac_axi *axi;
+ struct icc_path *axi_icc_path;
+ struct icc_path *ahb_icc_path;
int has_gmac4;
int rss_en;
int mac_port_sel_speed;
--
2.34.1
Powered by blists - more mailing lists