lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6c879527-4578-e3b5-2cc2-cf0638901f24@linux.intel.com>
Date: Mon, 8 Jul 2024 12:04:31 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: daire.mcnamara@...rochip.com
cc: linux-pci@...r.kernel.org, devicetree@...r.kernel.org, 
    conor.dooley@...rochip.com, lpieralisi@...nel.org, kw@...ux.com, 
    robh@...nel.org, bhelgaas@...gle.com, LKML <linux-kernel@...r.kernel.org>, 
    linux-riscv@...ts.infradead.org, krzk+dt@...nel.org, conor+dt@...nel.org
Subject: Re: [PATCH v6 1/3] PCI: microchip: Fix outbound address translation
 tables

On Fri, 28 Jun 2024, daire.mcnamara@...rochip.com wrote:

> From: Daire McNamara <daire.mcnamara@...rochip.com>
> 
> On Microchip PolarFire SoC (MPFS) the PCIe Root Port can be behind one of
> three general-purpose Fabric Interface Controller (FIC) buses that
> encapsulate an AXI-M interface. That FIC is responsible for managing
> the translations of the upper 32-bits of the AXI-M address. On MPFS,
> the Root Port driver needs to take account of that outbound address
> translation done by the parent FIC bus before setting up its own
> outbound address translation tables.  In all cases on MPFS,
> the remaining outbound address translation tables are 32-bit only.
> 
> Limit the outbound address translation tables to 32-bit only.
> 
> This necessitates changing a size_t in mc_pcie_setup_window
> to a resource_size_t to avoid a compile error on 32-bit platforms.

Do you really mean "a compile error" here, that is, building 32-bit kernel 
fails during compile stage? If not, it would be good to rephrase this line.

Other than that,

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>

--
 i.

> Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip Polarfire PCIe controller driver")
> Signed-off-by: Daire McNamara <daire.mcnamara@...rochip.com>
> Acked-by: Conor Dooley <conor.dooley@...rochip.com>
> ---
>  drivers/pci/controller/pcie-microchip-host.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
> index 137fb8570ba2..47c397ae515a 100644
> --- a/drivers/pci/controller/pcie-microchip-host.c
> +++ b/drivers/pci/controller/pcie-microchip-host.c
> @@ -23,6 +23,8 @@
>  /* Number of MSI IRQs */
>  #define MC_MAX_NUM_MSI_IRQS			32
>  
> +#define MC_OUTBOUND_TRANS_TBL_MASK		GENMASK(31, 0)
> +
>  /* PCIe Bridge Phy and Controller Phy offsets */
>  #define MC_PCIE1_BRIDGE_ADDR			0x00008000u
>  #define MC_PCIE1_CTRL_ADDR			0x0000a000u
> @@ -933,7 +935,7 @@ static int mc_pcie_init_irq_domains(struct mc_pcie *port)
>  
>  static void mc_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>  				 phys_addr_t axi_addr, phys_addr_t pci_addr,
> -				 size_t size)
> +				 resource_size_t size)
>  {
>  	u32 atr_sz = ilog2(size) - 1;
>  	u32 val;
> @@ -983,7 +985,8 @@ static int mc_pcie_setup_windows(struct platform_device *pdev,
>  		if (resource_type(entry->res) == IORESOURCE_MEM) {
>  			pci_addr = entry->res->start - entry->offset;
>  			mc_pcie_setup_window(bridge_base_addr, index,
> -					     entry->res->start, pci_addr,
> +					     entry->res->start & MC_OUTBOUND_TRANS_TBL_MASK,
> +					     pci_addr,
>  					     resource_size(entry->res));
>  			index++;
>  		}
> @@ -1117,9 +1120,8 @@ static int mc_platform_init(struct pci_config_window *cfg)
>  	int ret;
>  
>  	/* Configure address translation table 0 for PCIe config space */
> -	mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start,
> -			     cfg->res.start,
> -			     resource_size(&cfg->res));
> +	mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start & MC_OUTBOUND_TRANS_TBL_MASK,
> +			     0, resource_size(&cfg->res));
>  
>  	/* Need some fixups in config space */
>  	mc_pcie_enable_msi(port, cfg->win);


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ