lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240710162526.2341399-1-jbrunet@baylibre.com>
Date: Wed, 10 Jul 2024 18:25:09 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Philipp Zabel <p.zabel@...gutronix.de>,
	Stephen Boyd <sboyd@...nel.org>,
	Neil Armstrong <neil.armstrong@...aro.org>
Cc: Jerome Brunet <jbrunet@...libre.com>,
	Jan Dakinevich <jan.dakinevich@...utedevices.com>,
	linux-kernel@...r.kernel.org,
	linux-amlogic@...ts.infradead.org,
	linux-clk@...r.kernel.org
Subject: [PATCH 0/8] reset: amlogic: move audio reset drivers out of CCF

This patchset follows the discussion about having reset driver in the
clock tree [1]. Ideally those should reside in the reset part of tree.

Also the code of the amlogic reset driver is very similar between the 2
trees and could use the same driver code.

This patchset moves the reset driver of audio clock controller of the
g12 and sm1 SoC family to the reset tree, using the auxiliary bus.

The infrastructure put in place is meant to be generic enough so we may
eventually also move the reset drivers in the meson8b and aoclk clock
controllers.

Change since RFC [2]:
 * Move the aux registration helper out of clock too.

[1] https://lore.kernel.org/linux-clk/e3a85852b911fdf16dd9ae158f42b3ef.sboyd@kernel.org
[2] https://lore.kernel.org/linux-clk/20240516150842.705844-1-jbrunet@baylibre.com

Jerome Brunet (8):
  reset: amlogic: convert driver to regmap
  reset: amlogic: add driver parameters
  reset: amlogic: split the device and platform probe
  reset: amlogic: use reset number instead of register count
  reset: amlogic: add reset status support
  reset: amlogic: add toggle reset support
  reset: amlogic: add auxiliary reset driver support
  clk: amlogic: axg-audio: use the auxiliary reset driver

 drivers/clk/meson/Kconfig                   |   1 +
 drivers/clk/meson/axg-audio.c               | 109 +-------
 drivers/reset/Kconfig                       |   1 +
 drivers/reset/reset-meson.c                 | 285 ++++++++++++++++----
 include/soc/amlogic/meson-auxiliary-reset.h |  23 ++
 5 files changed, 271 insertions(+), 148 deletions(-)
 create mode 100644 include/soc/amlogic/meson-auxiliary-reset.h

-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ