linux-kernel - [PATCH v2 1/4] PCI: Check PCI_PM_CTRL in pci_dev

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20240710205838.2413465-2-superm1@kernel.org>
Date: Wed, 10 Jul 2024 15:58:35 -0500
From: superm1@...nel.org
To: Bjorn Helgaas <bhelgaas@...gle.com>,
	Mathias Nyman <mathias.nyman@...el.com>,
	Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc: "open list : PCI SUBSYSTEM" <linux-pci@...r.kernel.org>,
	open list <linux-kernel@...r.kernel.org>,
	"open list : USB XHCI DRIVER" <linux-usb@...r.kernel.org>,
	Daniel Drake <drake@...lessos.org>,
	Gary Li <Gary.Li@....com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Mario Limonciello <mario.limonciello@....com>
Subject: [PATCH v2 1/4] PCI: Check PCI_PM_CTRL in pci_dev_wait()

From: Mario Limonciello <mario.limonciello@....com>

A device that has gone through a reset may return a value in PCI_COMMAND
but that doesn't mean it's finished transitioning to D0.  On devices that
support power management explicitly check PCI_PM_CTRL on everything but
system resume to ensure the transition happened.

Devices that don't support power management and system resume will
continue to use PCI_COMMAND.

Signed-off-by: Mario Limonciello <mario.limonciello@....com>
---
 drivers/pci/pci.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 35fb1f17a589c..4ad02ad640518 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1270,21 +1270,34 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
 	 * the read (except when CRS SV is enabled and the read was for the
 	 * Vendor ID; in that case it synthesizes 0x0001 data).
 	 *
-	 * Wait for the device to return a non-CRS completion.  Read the
-	 * Command register instead of Vendor ID so we don't have to
-	 * contend with the CRS SV value.
+	 * Wait for the device to return a non-CRS completion.  On devices
+	 * that support PM control and on waits that aren't part of system
+	 * resume read the PM control register to ensure the device has
+	 * transitioned to D0.  On devices that don't support PM control,
+	 * or during system resume read the command register to instead of
+	 * Vendor ID so we don't have to contend with the CRS SV value.
 	 */
 	for (;;) {
-		u32 id;
 
 		if (pci_dev_is_disconnected(dev)) {
 			pci_dbg(dev, "disconnected; not waiting\n");
 			return -ENOTTY;
 		}
 
-		pci_read_config_dword(dev, PCI_COMMAND, &id);
-		if (!PCI_POSSIBLE_ERROR(id))
-			break;
+		if (dev->pm_cap && strcmp(reset_type, "resume") != 0) {
+			u16 pmcsr;
+
+			pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+			if (!PCI_POSSIBLE_ERROR(pmcsr) &&
+			    (pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D0)
+				break;
+		} else {
+			u32 id;
+
+			pci_read_config_dword(dev, PCI_COMMAND, &id);
+			if (!PCI_POSSIBLE_ERROR(id))
+				break;
+		}
 
 		if (delay > timeout) {
 			pci_warn(dev, "not ready %dms after %s; giving up\n",
-- 
2.43.0