[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240710221630.29561-6-james.quinlan@broadcom.com>
Date: Wed, 10 Jul 2024 18:16:19 -0400
From: Jim Quinlan <james.quinlan@...adcom.com>
To: linux-pci@...r.kernel.org,
Nicolas Saenz Julienne <nsaenz@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Cyril Brulebois <kibi@...ian.org>,
Stanimir Varbanov <svarbanov@...e.de>,
Krzysztof Kozlowski <krzk@...nel.org>,
bcm-kernel-feedback-list@...adcom.com,
jim2101024@...il.com,
james.quinlan@...adcom.com
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-rpi-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE),
linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE),
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v3 05/12] PCI: brcmstb: Use swinit reset if available
The 7712 SOC adds a software init reset device for the PCIe HW.
If found in the DT node, use it.
Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
---
drivers/pci/controller/pcie-brcmstb.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 92816d8d215a..4dc2ff7f3167 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -266,6 +266,7 @@ struct brcm_pcie {
struct reset_control *rescal;
struct reset_control *perst_reset;
struct reset_control *bridge;
+ struct reset_control *swinit;
int num_memc;
u64 memc_size[PCIE_BRCM_MAX_MEMC];
u32 hw_rev;
@@ -1633,12 +1634,27 @@ static int brcm_pcie_probe(struct platform_device *pdev)
if (IS_ERR(pcie->bridge))
return PTR_ERR(pcie->bridge);
+ pcie->swinit = devm_reset_control_get_optional_exclusive(&pdev->dev, "swinit");
+ if (IS_ERR(pcie->swinit))
+ return PTR_ERR(pcie->swinit);
+
ret = clk_prepare_enable(pcie->clk);
if (ret) {
dev_err(&pdev->dev, "could not enable clock\n");
return ret;
}
+ ret = reset_control_assert(pcie->swinit);
+ if (ret) {
+ dev_err_probe(&pdev->dev, ret, "could not assert reset 'swinit'\n");
+ goto clk_out;
+ }
+ ret = reset_control_deassert(pcie->swinit);
+ if (ret) {
+ dev_err(&pdev->dev, "could not de-assert reset 'swinit' after asserting\n");
+ goto clk_out;
+ }
+
ret = reset_control_reset(pcie->rescal);
if (ret) {
dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
--
2.17.1
Download attachment "smime.p7s" of type "application/pkcs7-signature" (4210 bytes)
Powered by blists - more mailing lists