[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240710084250.11342-3-rayyan.ansari@linaro.org>
Date: Wed, 10 Jul 2024 09:41:10 +0100
From: Rayyan Ansari <rayyan.ansari@...aro.org>
To: linux-arm-msm@...r.kernel.org
Cc: Rayyan Ansari <rayyan.ansari@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
linux-kernel@...r.kernel.org,
Rob Herring <robh@...nel.org>
Subject: [PATCH 2/3] ARM: dts: qcom: ipq8064: adhere to pinctrl dtschema
Pass dt_binding_check for qcom,ipq8064-pinctrl.yaml.
Also remove invalid "bias-none" property, which I have assumed to mean
"bias-disable".
Signed-off-by: Rayyan Ansari <rayyan.ansari@...aro.org>
---
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts | 11 +-
.../arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts | 76 +++++-------
arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 114 ++++++++----------
3 files changed, 87 insertions(+), 114 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
index a654d3c22c4f..5a8bf1a6f559 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dts
@@ -7,12 +7,11 @@ / {
soc {
pinmux@...000 {
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio54", "gpio65";
- drive-strength = <2>;
- bias-pull-up;
- };
+ buttons_pins: buttons-state {
+ pins = "gpio54", "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
index 12e806adcda8..f09da9460c86 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dts
@@ -404,59 +404,49 @@ main@...000 {
};
&qcom_pinmux {
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio66";
- drive-strength = <16>;
- bias-disable;
- };
+ buttons_pins: buttons-state {
+ pins = "gpio66";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
};
- leds_pins: leds_pins {
- mux {
- pins = "gpio33";
- drive-strength = <16>;
- bias-disable;
- };
+ leds_pins: leds-state {
+ pins = "gpio33";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
};
- mdio1_pins: mdio1_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
+ mdio1_pins: mdio1-state {
+ pins = "gpio10", "gpio11";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
};
- sw0_reset_pin: sw0_reset_pin {
- mux {
- pins = "gpio16";
- drive-strength = <16>;
- function = "gpio";
- bias-disable;
- input-disable;
- };
+ sw0_reset_pin: sw0-reset-state {
+ pins = "gpio16";
+ drive-strength = <16>;
+ function = "gpio";
+ bias-disable;
+ input-disable;
};
- sw1_reset_pin: sw1_reset_pin {
- mux {
- pins = "gpio17";
- drive-strength = <16>;
- function = "gpio";
- bias-disable;
- input-disable;
- };
+ sw1_reset_pin: sw1-reset-state {
+ pins = "gpio17";
+ drive-strength = <16>;
+ function = "gpio";
+ bias-disable;
+ input-disable;
};
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio4";
- function = "gpio";
- drive-strength = <16>;
- bias-disable;
- output-high;
- };
+ usb1_pwr_en_pins: usb1-pwr-en-state {
+ pins = "gpio4";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-disable;
+ output-high;
};
};
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index da0fd75f4711..9adefc88c5b4 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -399,70 +399,58 @@ qcom_pinmux: pinmux@...000 {
#interrupt-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- pcie0_pins: pcie0_pinmux {
- mux {
- pins = "gpio3";
- function = "pcie1_rst";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie0_pins: pcie0-state {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <12>;
+ bias-disable;
};
- pcie1_pins: pcie1_pinmux {
- mux {
- pins = "gpio48";
- function = "pcie2_rst";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie1_pins: pcie1-state {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <12>;
+ bias-disable;
};
- pcie2_pins: pcie2_pinmux {
- mux {
- pins = "gpio63";
- function = "pcie3_rst";
- drive-strength = <12>;
- bias-disable;
- };
+ pcie2_pins: pcie2-state {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <12>;
+ bias-disable;
};
- i2c4_pins: i2c4-default {
+ i2c4_pins: i2c4-state {
pins = "gpio12", "gpio13";
function = "gsbi4";
drive-strength = <12>;
bias-disable;
};
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
+ spi_pins: spi-state {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-disable;
};
- leds_pins: leds_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9",
- "gpio26", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- output-low;
- };
+ leds_pins: leds-state {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
};
- buttons_pins: buttons_pins {
- mux {
- pins = "gpio54";
- drive-strength = <2>;
- bias-pull-up;
- };
+ buttons_pins: buttons-state {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-pull-up;
};
- nand_pins: nand_pins {
- mux {
+ nand_pins: nand-state {
+ nand-pins {
pins = "gpio34", "gpio35", "gpio36",
"gpio37", "gpio38", "gpio39",
"gpio40", "gpio41", "gpio42",
@@ -473,14 +461,14 @@ mux {
bias-disable;
};
- pullups {
+ nand-pullup-pins {
pins = "gpio39";
function = "nand";
drive-strength = <10>;
bias-pull-up;
};
- hold {
+ nand-hold-pins {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
@@ -490,25 +478,21 @@ hold {
};
};
- mdio0_pins: mdio0-pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "mdio";
- drive-strength = <8>;
- bias-disable;
- };
+ mdio0_pins: mdio0-state {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
};
- rgmii2_pins: rgmii2-pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29",
- "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59",
- "gpio60", "gpio61", "gpio62";
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
+ rgmii2_pins: rgmii2-state {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
};
};
--
2.45.2
Powered by blists - more mailing lists