| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <xk2dqqzpaah6lbx2fwa6aokm6sw3auyrntstuvuik4cevuaekw@ylgbnb43le47>
Date: Wed, 10 Jul 2024 15:22:29 +0200
From: Jacopo Mondi <jacopo.mondi@...asonboard.com>
To: Changhuang Liang <changhuang.liang@...rfivetech.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Sakari Ailus <sakari.ailus@...ux.intel.com>,
Hans Verkuil <hverkuil-cisco@...all.nl>, Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jean-Michel Hautbois <jeanmichel.hautbois@...asonboard.com>, Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Tomi Valkeinen <tomi.valkeinen+renesas@...asonboard.com>, Mingjia Zhang <mingjia.zhang@...iatek.com>,
Jack Zhu <jack.zhu@...rfivetech.com>, Keith Zhao <keith.zhao@...rfivetech.com>,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org, linux-staging@...ts.linux.dev
Subject: Re: [PATCH v5 00/14] Add ISP 3A for StarFive
Hi Changhuang
I've passed the series through the media-staging CI
https://gitlab.freedesktop.org/linux-media/users/jmondi/-/pipelines/1220920
Could you check the errors reported there ?
On Tue, Jul 09, 2024 at 01:38:10AM GMT, Changhuang Liang wrote:
> This series implements the ISP 3A function to the Camera Subsystem on StarFive
> JH7110 SoC. The series has been tested on the VisionFive 2 board.
>
> This series is based on top of the master branch of media_stage repository,
> which is tested with a v4l2-compliance compiled from the git repo
> (git://linuxtv.org/v4l-utils.git).
>
> changes since v4:
> - Rebase on top of the master branch of media_stage repository.
> - Insert a new PATCH 13
> - PATCH 1:
> 1. Fix spelling error:
> - corsstakl -> crosstalk
> - balck -> black
> - magbitude -> magnitude
> - FALG -> FLAG
> 2. Exchange of the values of JH7110_ISP_SC_FLAG_AE_AF and JH7110_ISP_SC_FLAG_AWB
>
> - PATCH 8:
> 1. Synchronous spelling error: FALG -> FLAG
> 2. Add:
>
> if (*num_planes)
> return sizes[0] < sizeof(struct jh7110_isp_sc_buffer) ? -EINVAL : 0;
>
> - PATCH 11:
> 1. Drop read hook.
> 2. Add:
>
> if (*num_planes)
> return sizes[0] < sizeof(struct jh7110_isp_params_buffer) ? -EINVAL : 0;
>
> - PATCH 12:
> 1. Add:
>
> ready_buf->vb.vb2_buf.timestamp = ktime_get_ns();
> ready_buf->vb.sequence = output->buffers.sequence++;
>
> to fix "v4l2-compliance -s" Failed.
>
> v4: https://lore.kernel.org/all/20240402100011.13480-1-changhuang.liang@starfivetech.com/
>
> changes since v3:
> - Rebased on top of the master branch of media_stage repository and patch [1][2].
> - Replaced "stf_get_isp_scd_type" with "stf_isp_get_scd_type" in PATCH 8.
>
> v3: https://lore.kernel.org/all/20240205090424.40302-1-changhuang.liang@starfivetech.com/
>
> changes since v2:
> - Rebased on top of the master branch of media_stage repository.
> - Added helper function "media_entity_remove_links" in PATCH 8 and PATCH 11 to cleanup links.
>
> v2: https://lore.kernel.org/all/20240111084120.16685-1-changhuang.liang@starfivetech.com/
>
> changes since v1:
> - Rebased on top of the master branch of media_stage repository.
> - Documentated ISP submodule.
> - Added new ISP parameters format and document it.
> - Added a meta output video device and link to ISP subdev.
> - Replaced control with meta output video buffer for write ISP parameters.
> - Separated buffer operation which can use for capture and output device.
> - Droped ISP frame sync event.
>
> v1: https://lore.kernel.org/all/20231214065027.28564-1-changhuang.liang@starfivetech.com/
>
> The following are the media graph for the device and the v4l2-compliance
> output.
>
> ==========================================================================================
>
> [the media graph]:
>
> digraph board {
> rankdir=TB
> n00000001 [label="{{<port0> 0 | <port1> 1} | stf_isp\n/dev/v4l-subdev0 | {<port2> 2 | <port3> 3}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000001:port2 -> n0000000e
> n00000001:port3 -> n00000012 [style=dashed]
> n00000006 [label="output_params\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
> n00000006 -> n00000001:port1 [style=dashed]
> n0000000a [label="capture_raw\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> n0000000e [label="capture_yuv\n/dev/video2", shape=box, style=filled, fillcolor=yellow]
> n00000012 [label="capture_scd\n/dev/video3", shape=box, style=filled, fillcolor=yellow]
> n0000001c [label="{{<port0> 0} | cdns_csi2rx.19800000.csi-bridge\n/dev/v4l-subdev1 | {<port1> 1 | <port2> 2 | <port3> 3 | <port4> 4}}", shape=Mrecord, style=filled, fillcolor=green]
> n0000001c:port1 -> n00000001:port0 [style=dashed]
> n0000001c:port1 -> n0000000a [style=dashed]
> n00000026 [label="{{} | imx219 6-0010\n/dev/v4l-subdev2 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> n00000026:port0 -> n0000001c:port0 [style=bold]
> }
>
> [v4l2-compliance test]:
>
> # ./v4l2-compliance -s -d /dev/video0
> v4l2-compliance 1.27.0-5220, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 8387e3673837 2024-07-01 11:09:32
>
> Compliance test for starfive-camss device /dev/video0:
>
> Driver Info:
> Driver name : starfive-camss
> Card type : Starfive Camera Subsystem
> Bus info : platform:19840000.isp
> Driver version : 6.10.0
> Capabilities : 0xac200000
> Metadata Output
> I/O MC
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x2c200000
> Metadata Output
> I/O MC
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : starfive-camss
> Model : Starfive Camera Subsystem
> Serial :
> Bus info : platform:19840000.isp
> Media version : 6.10.0
> Hardware revision: 0x00000000 (0)
> Driver version : 6.10.0
> Interface Info:
> ID : 0x03000008
> Type : V4L Video
> Entity Info:
> ID : 0x00000006 (6)
> Name : output_params
> Function : V4L2 I/O
> Pad 0x01000007 : 0: Source
> Link 0x0200001a: to remote pad 0x1000003 of entity 'stf_isp' (Image Signal Processor): Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 0 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 1 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Output 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls (Output 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Output 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Output 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test output 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test blocking wait: OK
> test MMAP (no poll): OK
> test MMAP (select): OK
> test MMAP (epoll): OK
> test USERPTR (no poll): OK (Not Supported)
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for starfive-camss device /dev/video0: 55, Succeeded: 55, Failed: 0, Warnings: 0
>
> # ./v4l2-compliance -s -d /dev/video3
> v4l2-compliance 1.27.0-5220, 64 bits, 64-bit time_t
> v4l2-compliance SHA: 8387e3673837 2024-07-01 11:09:32
>
> Compliance test for starfive-camss device /dev/video3:
>
> Driver Info:
> Driver name : starfive-camss
> Card type : Starfive Camera Subsystem
> Bus info : platform:19840000.isp
> Driver version : 6.10.0
> Capabilities : 0xa4a00000
> Metadata Capture
> I/O MC
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x24a00000
> Metadata Capture
> I/O MC
> Streaming
> Extended Pix Format
> Media Driver Info:
> Driver name : starfive-camss
> Model : Starfive Camera Subsystem
> Serial :
> Bus info : platform:19840000.isp
> Media version : 6.10.0
> Hardware revision: 0x00000000 (0)
> Driver version : 6.10.0
> Interface Info:
> ID : 0x03000014
> Type : V4L Video
> Entity Info:
> ID : 0x00000012 (18)
> Name : capture_scd
> Function : V4L2 I/O
> Pad 0x01000013 : 0: Sink
> Link 0x02000018: from remote pad 0x1000005 of entity 'stf_isp' (Image Signal Processor): Data
>
> Required ioctls:
> test MC information (see 'Media Driver Info' above): OK
> test VIDIOC_QUERYCAP: OK
> test invalid ioctls: OK
>
> Allow for multiple opens:
> test second /dev/video3 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Input 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls (Input 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Input 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Input 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test CREATE_BUFS maximum buffers: OK
> test VIDIOC_REMOVE_BUFS: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK (Not Supported)
> test blocking wait: OK
> test MMAP (no poll): OK
> test MMAP (select): OK
> test MMAP (epoll): OK
> test USERPTR (no poll): OK (Not Supported)
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for starfive-camss device /dev/video3: 55, Succeeded: 55, Failed: 0, Warnings: 0
>
> Changhuang Liang (14):
> media: starfive: Add JH7110 ISP module definitions
> media: Documentation: Add description for StarFive ISP metadata
> formats
> media: videodev2.h, v4l2-ioctl: Add StarFive ISP meta buffer format
> staging: media: starfive: Add a params sink pad and a scd source pad
> for ISP
> staging: media: starfive: Separate buffer from ISP hardware operation
> staging: media: starfive: Separate buffer be a common file
> staging: media: starfive: Separate ISP hardware from capture device
> staging: media: starfive: Add for StarFive ISP 3A SC
> staging: media: starfive: Update ISP initialise config for 3A
> staging: media: starfive: Add V4L2_CAP_IO_MC capability
> staging: media: starfive: Add ISP params video device
> staging: media: starfive: Add ISP parameters hardware configure
> staging: media: starfive: Drop read support for video capture devices
> admin-guide: media: Update documents for StarFive Camera Subsystem
>
> .../admin-guide/media/starfive_camss.rst | 11 +-
> .../media/starfive_camss_graph.dot | 22 +-
> .../media/v4l/metafmt-starfive-isp.rst | 75 ++
> MAINTAINERS | 2 +
> drivers/media/v4l2-core/v4l2-ioctl.c | 2 +
> drivers/staging/media/starfive/camss/Makefile | 3 +
> .../staging/media/starfive/camss/stf-buffer.c | 166 ++++
> .../staging/media/starfive/camss/stf-buffer.h | 53 ++
> .../staging/media/starfive/camss/stf-camss.c | 38 +-
> .../staging/media/starfive/camss/stf-camss.h | 12 +
> .../media/starfive/camss/stf-capture.c | 248 +-----
> .../media/starfive/camss/stf-capture.h | 22 -
> .../media/starfive/camss/stf-isp-hw-ops.c | 722 +++++++++++++++++
> .../media/starfive/camss/stf-isp-params.c | 240 ++++++
> .../staging/media/starfive/camss/stf-isp.c | 77 +-
> .../staging/media/starfive/camss/stf-isp.h | 188 +++++
> .../staging/media/starfive/camss/stf-output.c | 83 ++
> .../staging/media/starfive/camss/stf-output.h | 22 +
> .../staging/media/starfive/camss/stf-video.c | 147 +++-
> .../staging/media/starfive/camss/stf-video.h | 11 +-
> include/uapi/linux/jh7110-isp.h | 739 ++++++++++++++++++
> include/uapi/linux/videodev2.h | 4 +
> 22 files changed, 2608 insertions(+), 279 deletions(-)
> create mode 100644 Documentation/userspace-api/media/v4l/metafmt-starfive-isp.rst
> create mode 100644 drivers/staging/media/starfive/camss/stf-buffer.c
> create mode 100644 drivers/staging/media/starfive/camss/stf-buffer.h
> create mode 100644 drivers/staging/media/starfive/camss/stf-isp-params.c
> create mode 100644 drivers/staging/media/starfive/camss/stf-output.c
> create mode 100644 drivers/staging/media/starfive/camss/stf-output.h
> create mode 100644 include/uapi/linux/jh7110-isp.h
>
> --
> 2.25.1
>
Powered by blists - more mailing lists