| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240711-th1520-clk-v3-4-6ff17bb318fb@tenstorrent.com>
Date: Thu, 11 Jul 2024 09:56:22 -0700
From: Drew Fustini <dfustini@...storrent.com>
To: Jisheng Zhang <jszhang@...nel.org>, Guo Ren <guoren@...nel.org>,
Fu Wei <wefu@...hat.com>, Yangtao Li <frank.li@...o.com>,
Thomas Bonnefille <thomas.bonnefille@...tlin.com>,
Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>
Cc: linux-riscv@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Drew Fustini <dfustini@...storrent.com>
Subject: [PATCH v3 4/7] riscv: dts: thead: change TH1520 uart nodes to use
clock controller
Change the clock property in TH1520 uart nodes to a clock provided by
AP_SUBSYS clock controller.
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@...storrent.com>
---
arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 4 ----
.../boot/dts/thead/th1520-lichee-module-4a.dtsi | 4 ----
arch/riscv/boot/dts/thead/th1520.dtsi | 24 +++++++++++-----------
3 files changed, 12 insertions(+), 20 deletions(-)
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index d9b4de9e4757..164afd18b56c 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -52,10 +52,6 @@ &sdhci_clk {
clock-frequency = <198000000>;
};
-&uart_sclk {
- clock-frequency = <100000000>;
-};
-
&dmac0 {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 1365d3a512a3..1b7ede570994 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -33,10 +33,6 @@ &sdhci_clk {
clock-frequency = <198000000>;
};
-&uart_sclk {
- clock-frequency = <100000000>;
-};
-
&dmac0 {
status = "okay";
};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 10a38ed55658..66df04ceb3e4 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -141,12 +141,6 @@ apb_clk: apb-clk-clock {
#clock-cells = <0>;
};
- uart_sclk: uart-sclk-clock {
- compatible = "fixed-clock";
- clock-output-names = "uart_sclk";
- #clock-cells = <0>;
- };
-
sdhci_clk: sdhci-clock {
compatible = "fixed-clock";
clock-frequency = <198000000>;
@@ -195,7 +189,8 @@ uart0: serial@...7014000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7014000 0x0 0x100>;
interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -232,7 +227,8 @@ uart1: serial@...7f00000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f00000 0x0 0x100>;
interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -242,7 +238,8 @@ uart3: serial@...7f04000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xe7f04000 0x0 0x100>;
interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -324,7 +321,8 @@ uart2: serial@...c010000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xec010000 0x0 0x4000>;
interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -386,7 +384,8 @@ uart4: serial@...7f08000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f08000 0x0 0x4000>;
interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
@@ -396,7 +395,8 @@ uart5: serial@...7f0c000 {
compatible = "snps,dw-apb-uart";
reg = <0xff 0xf7f0c000 0x0 0x4000>;
interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_sclk>;
+ clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
--
2.34.1
Powered by blists - more mailing lists